I'm on a shoot where we need to use a wireless hop between mixer and camera. I'm using a sound devices 788t and have connected an audio limited tx2020 to one of the analogue outputs. The camera is a Sony DV cam with Audio Limited DX2020 connected to xlr input (line). The problem is the level on the camera is extremely low. When hardwired from 788 to camera, the level is good. I've tested the Audio Limiteds by plugging a lapel into the tx and pluging the dx into the camera xlr (mic). Levels are fine. Using the 788 to camera hop with mic selected on the cameras input gives a better level but theres tons of hiss and distortion.
Has anyone an idea to this problem? The outputs of the 788 are line level so the input on the camera should be line too even using the wireless hop right? So why the low level?
Any help would be appreciated...