Tag: wanhao

9 Wanhao Duplicator i3 ABS settings 2016-05-04T16:34:55.610

7 How to make moving parts not stick together? 2018-08-06T17:37:08.527

5 Wanhao i3 PLUS restarts when connecting USB 2016-08-03T21:47:25.763

5 After 1.5 hours of printing quality degraded 2017-07-12T21:53:57.797

5 Regular over-extrusion..? 2018-02-14T18:34:08.173

5 Temperature offset on Wanhao Duplicator i3 Mini 2018-03-24T12:45:34.063

5 Extrusion stops during print 2018-06-09T10:47:22.053

5 Compensating for smaller extruder gear 2018-10-10T16:09:05.737

5 How do I calibrate the temperature of my hotend? 2018-12-13T16:49:09.920

4 Is the Prometheus system compatible with Wanhao Duplicator i3 Plus? 2017-06-06T00:32:18.853

4 Ultimaker Cura infill issues (weird vertical pillars due to underextrusion) 2017-06-28T22:04:49.930

4 Jammed extruder. Wanhao duplicator i3 Plus 2018-01-03T14:10:48.047

4 Adjusting Z-axis (Monoprice Maker Select) 2018-07-13T22:17:48.610

4 Can't print on Wanhao Duplicator i3 Mini 2018-10-05T19:37:56.680

4 Wanhao i3 stops printing after about 40 minutes 2019-06-08T18:59:01.807

4 Wanhao Duplicator i3 Mini - Not reaching temperature -> screen freezes 2019-08-12T09:23:09.270

3 Monoprice Maker Ultimate Extrudes Too Much Filament At Start 2017-05-24T04:29:47.617

3 Wanhao Duplicator i3 plus temperature out of control 2018-12-11T19:42:35.873

3 Build plate (PEI on glass) isn't flat after several months of use? 2019-11-01T19:06:38.113

2 Print is not properly laminated at certain height 2017-02-27T15:52:54.077

2 "Missing" rows on 64x128 LCD after flashing Marlin 1.1.9 onto Monoprice Maker Select v2 2018-12-09T23:52:58.267

1 Resin burns to transparent sheet 2019-09-19T06:26:35.177

1 Is there any way I can remap pins so the Z axis outputs through the extruder driver? 2020-03-28T23:56:20.797

1 Consistent blobbing and gaps in print towards right side 2020-04-08T18:41:17.503

1 Upgrade hot-end to achieve higher temps (e.g. for PETG) 2020-06-09T21:04:27.450

0 3d printer recommendations that can print fidgets? 2020-02-21T00:47:55.110

0 Monoprice Maker (Wanhao Duplicator Clone) Intermittent Underextrusion 2020-05-01T13:02:40.113