Tag: ultimaker-cura

16 In Cura, can I make my top and bottom layer be all perimiters? 2019-10-19T07:59:20.990

13 How to build CuraEngine? 2016-06-10T18:35:07.770

13 Why is it conventional to set line width > nozzle diameter? 2018-09-21T06:13:23.900

12 How to configure Cura to run the Z probe before heating 2016-02-03T06:42:47.657

11 Cura not allowing full print area to used 2016-02-25T02:42:02.643

11 Danger in 3D printing over a lithium ion battery 2018-04-24T18:25:08.703

10 Cura: set z-offset 2017-10-16T14:39:31.857

9 Seemingly random lines on the surface 2018-03-06T20:12:39.740

9 Platform support up to a certain Z height in Ultimaker Cura/G-code 2018-04-02T21:02:54.000

9 Print only part (fraction) of a model 2018-05-19T08:44:57.100

8 M3D Micro printer stops extruding but is not clogged 2016-09-17T19:17:52.940

8 Missing top layers in Cura 2016-12-02T10:17:43.533

8 Skipping Y-steps, only when using Ultimaker Cura 2017-01-04T10:58:42.497

8 Monoprice Select IIIP Plus - Best speed settings and speeding up prints 2017-07-22T18:26:18.357

8 Under extrusion with Cura 3.1 2017-12-21T12:43:04.930

8 How to set the Z home offset 2018-10-23T19:53:08.303

8 Extruder doesn't retract on inner wall lines thereby causing stringing 2018-12-17T18:35:33.537

8 Trouble printing small thin pole 2019-03-25T02:17:45.767

8 Is there a way to save a multi part print if one fails? 2020-07-23T12:23:04.443

7 How to edit Cura profile in Octoprint? 2016-01-21T23:09:21.300

7 Show generated support structures in Cura 2016-02-25T23:57:07.407

7 Settings for CuraEngine 2016-03-08T19:41:20.913

7 Are self intersecting meshes dirty from a 3D printing perspective? 2016-12-27T17:56:50.160

7 Wavy walls with Ultimaker Cura 2017-10-18T20:04:26.710

7 Nozzle always "randomly" moves to 0 during print, then resumes 2017-12-02T19:39:42.413

7 Tuning line width and flow compensation in Cura 2018-02-18T10:59:29.483

7 Writing G-code : swiping at start of print 2018-07-10T09:38:45.590

7 Does Cura have an algorithm for any infill percentage or does it just have specific patterns? 2018-08-08T18:04:20.210

7 Slicing problem - Slic3r prusa 2018-08-27T22:30:49.547

7 Ender 3 severe under-extrusion 2019-03-10T18:38:49.920

7 How to pause a print to insert something in a cavity using Ultimaker Cura? 2019-07-14T11:06:39.267

7 Lines appearing during ironing 2020-01-02T18:36:29.700

6 Cura 2.4 missing "split object into parts" 2017-03-12T20:45:20.317

6 Anet A8 beginning layers not printing correctly 2017-05-19T01:32:38.607

6 Slic3r settings for flat slopes on top 2017-05-24T13:52:19.213

6 First layer eventually sticks to the hotend and tears 2017-06-14T22:23:42.443

6 Why is my 3D printer over extruding when I have set the flow rate very low 2017-12-18T19:54:47.410

6 Getting bumps/warts on surface, Cura doesn't want to comb? 2018-05-15T02:36:57.383

6 Can't connect Cura to my Anet A8 on OSX 10.11.6 2018-06-24T18:11:56.130

6 Monoprice Select Mini V2 retraction/stringing problem 2018-09-27T23:54:55.047

6 Adding additional extrusion to a raft (raft with a skirt?) 2018-11-08T13:41:13.097

6 Settings for vase mode in CURA? 2018-12-09T10:56:26.190

6 Print came out like a wafer 2019-04-30T02:57:45.477

6 Do Cura's self-crossing infill patterns account for excess material from self-crossing? 2019-07-03T18:51:38.350

6 Are there many differences between Ultimaker Cura and FlashForge FlashPrint slicers? 2019-08-27T16:45:03.360

6 Random lines are being printed? 2019-11-05T23:13:15.840

5 Bronze Filament Problem 2016-04-13T19:30:52.690

5 Thick wall or solid part of an otherwise medium-fill part 2016-12-24T03:13:41.090

5 Why is the bottom of my part not smooth 2017-06-26T05:21:55.250

5 Setup Creality CR-10 in Cura 2017-07-18T10:36:55.007

5 How do I modify Cura's code generation? 2017-07-25T02:53:01.673

5 Prusa i3 - First layer does not stick and looks jagged 2017-10-20T02:19:53.487

5 Flashforge Dreamer not able to read Cura created G-code file 2018-06-08T09:29:05.637

5 Multiple unattended prints using extruder to sweep build plate? 2018-07-12T08:55:15.740

5 Where is a reputable place to download Ultimaker Cura? 2018-07-17T23:22:59.773

5 Can I use a 0 mm top layer thickness in Ultimaker Cura to create an open box? 2018-08-07T03:32:37.460

5 Strange layer separation issues on Ender 3 2018-08-14T04:44:35.477

5 Strange walls/faces when importing self made model from Blender to Cura 3 2018-10-03T11:48:53.890

5 PETG filament doesn't stick reliably to fake Buildtak surface 2018-10-06T05:27:46.417

5 Compensating for smaller extruder gear 2018-10-10T16:09:05.737

5 Getting a Cura Raft to stick to the object more firmly (for ABS) 2018-11-10T21:29:03.850

5 Printing rectangular grid 2019-01-07T07:37:34.100

5 Move print bed to front at the end of a print rather than the back 2019-02-06T18:45:53.690

5 How to fix wall separation in 3D prints (gaps in between wall perimeters)? 2019-06-16T09:50:38.257

5 Writing G-code: Audible Alert at end of print 2019-09-21T07:49:01.270

5 Does CuraEngine get some advantage slicing cylinders to move the head back to the center twice on each layer? 2019-12-01T19:50:11.337

5 Fixing Z-Hop Stringing 2019-12-16T01:03:52.490

5 Ender 3 Extruder First Layer Perfect But Then Starts Clicking Afterwards 2020-02-06T07:07:32.430

5 Simultaneous heating of extruder and bed at start of print 2020-03-15T18:50:56.100

5 Why does a raft adhere to the bed while skirt does not? 2021-02-20T23:04:47.373

4 What makes Pronterface wait for user? 2016-02-07T14:13:33.580

4 Setting Resolution? 2016-08-05T04:34:29.177

4 Changing raster angle, raster width and build orientation in Ultimaker Cura 2017-02-06T21:44:25.397

4 Nozzle moves very slowly from home to start position 2017-05-05T11:53:33.177

4 Regarding the E-step in Cura 2017-05-12T14:51:05.583

4 Using a MakerBot Replicator 1 dual (or clone like FlashForge Creator) with Cura 2017-06-21T06:21:13.097

4 Ultimaker Cura infill issues (weird vertical pillars due to underextrusion) 2017-06-28T22:04:49.930

4 Centering model with CuraEngine when creating g-code? 2017-10-25T06:50:39.283

4 Do I need to manually enter in gcode to turn off the bed and nozzle? 2017-10-29T20:01:51.683

4 My print did not turn out as I expected. Where can I start troubleshooting? 2017-10-31T00:55:27.567

4 Printing starts well but then it breaks down, Anet A8 2017-11-14T19:34:29.083

4 Where is the "slice" button in Cura? 2017-11-16T01:48:51.287

4 Using KISSlicer from command line on Linux? 2017-12-17T09:28:33.640

4 Problems with support interface since cura 3.1 2018-01-05T20:34:40.817

4 Anet A8 Calibrated but print sizes are wrong 2018-01-23T13:23:15.080

4 Cura printer settings for Alladinbox SkyCube 3D 2018-05-24T13:43:25.600

4 How is the E argument calculated for a given G1 command? 2018-07-05T17:35:22.243

4 Adjusting Z-axis (Monoprice Maker Select) 2018-07-13T22:17:48.610

4 Cura confused as to what's touching the buildplate? 2018-07-28T02:01:33.333

4 Show the time index in Cura Layer View playback 2018-08-13T05:17:30.263

4 How to remove unwanted filament trails from sharp corners 2018-09-25T23:49:57.660

4 Under extrusion, looking for specific information 2018-10-09T16:50:52.423

4 Cura 3.5 doesn't launch repeatably 2018-10-11T04:59:09.977

4 Ultimaker Cura not always telling extruder to retract when traveling 2018-10-21T18:39:42.187

4 Monoprice Select Mini v2 - Some Prints Freeze 2018-11-30T02:41:03.770

4 Why does my model stop printing at the same spot? 2018-12-24T17:55:03.473

4 Internal wall does not print in horizontal print orientation 2018-12-24T20:26:50.463

4 Slic3r top layer issues, small gaps, weird extruder paths 2019-01-24T20:29:24.273

4 Slicer settings for easy support material removal 2019-02-15T11:44:08.840