Tag: support-structures

17 What can I use to "sand" my ABS prints? 2016-01-13T00:41:32.907

14 How to improve face that are printed on support? 2016-02-07T15:03:18.640

12 How to easily get rid of rafts and support structures? 2016-01-12T19:28:09.363

9 Platform support up to a certain Z height in Ultimaker Cura/G-code 2018-04-02T21:02:54.000

9 Software for adding supports to 3D printed miniatures in STL file 2018-05-10T08:08:03.047

8 How does Carbon3D's CLIP technology handle bridges and support material? 2016-04-11T03:30:22.983

7 Getting better support than Slic3r generates 2016-05-04T02:47:04.393

7 How to add internal supports/localized infill, preferably in Cura? 2016-07-11T08:29:43.950

6 Is 3D printing feasible for a coaxial rotational joint? 2016-03-07T18:42:44.330

6 Printing coarse threads 2017-03-26T16:44:21.083

6 Support material first layer adhesion issues 2018-03-28T12:13:05.263

5 Over-hangs in prints 2018-01-26T20:34:01.747

5 How can I generate and export the support structure for an object as a mesh? 2018-05-25T01:19:10.300

5 3D Printing of a Swellable Material 2018-05-26T12:40:06.847

5 Print "hairs" without support in GrabCAD Print 2018-10-24T17:03:39.637

5 3D printed part sticking to the support layer 2019-02-28T14:43:50.433

4 Easy way to create honey comb filling for a generic printer/onshape 2017-02-12T10:22:17.747

4 Structural Analysis 2017-03-17T01:43:29.620

4 Having trouble getting first layer support to stick 2017-04-23T17:30:35.137

4 Best method to make dissolvable supports? 2017-05-21T05:21:40.173

4 Problems with support interface since cura 3.1 2018-01-05T20:34:40.817

4 How to correctly print an object with supports 2018-10-22T00:34:40.537

4 Difficult to remove support material 2019-01-16T12:04:55.947

4 Slicer settings for easy support material removal 2019-02-15T11:44:08.840

4 Horizontal line z-axis not printing correctly 2019-10-05T23:16:59.607

3 How to enlarge a Sketchup Model 2016-05-11T06:45:35.900

3 Print circle arcs without supports 2017-02-07T14:13:32.897

3 Adding support when generating g-code from Cura Engine (command line)? 2017-10-17T07:21:56.447

3 Supports for dense Voronoi pieces 2018-01-21T03:42:15.537

3 What is the best way to print a model with support material in first layer? 2018-01-21T06:25:47.097

3 Is there any setting that could allow me to print this overhang without support? 2018-02-22T11:20:33.190

3 Only generate supports between object and bed (for a brain model) 2018-05-11T17:53:10.460

3 How can I tell if an STL model will need supports? 2018-07-01T02:09:53.910

3 PVA support with small tolerances 2018-12-17T13:09:31.213

3 How could I print a large sphere-like object? 2018-12-21T18:39:06.110

3 How can I print a 1 cm overhang with minimal supports? 2019-07-23T16:41:14.297

3 My first 3D printing - I need some advice or tips 2019-09-13T15:34:26.373

3 Technique for removing support from Ultimaker 2+? 2019-10-19T10:21:52.463

3 How to ease the process of removing support for miniatures 2020-01-13T00:32:15.113

3 Can PETG be used as support material for PLA? 2020-06-23T13:38:58.787

2 Is it possible to print an object that has a "roof" without anything under it? 2017-03-11T15:45:09.743

2 Is Simplify 3D really worth it? 2017-12-13T14:52:45.907

2 What are various types of supports required in slicing the CAD model? 2018-05-06T07:17:43.817

2 How to print text upside down for minimal support when printing 2018-08-27T16:48:01.473

2 Flexible filament how to print a hollow "sleeve" 2019-01-24T00:42:51.380

2 Slicer is adding additional floor bed 2019-09-14T09:14:29.417

2 Cura is printing support on nothing? 2020-01-08T09:16:24.197

2 SLA printing: piece does not stick to supporting structures 2020-03-08T10:42:17.520

2 How to accurately print a thin piece with a hole pattern 2021-02-11T12:41:52.187

1 How to avoid warping when using supports 2018-02-11T16:00:58.407

1 Ultimaker Cura problems with build platform size and overhang support 2018-11-12T20:50:43.540

1 Support not where needed 2018-12-15T17:32:27.617

1 Slic3r - how to combine specific perl code with Slic3r SupportMaterial.pm? 2019-03-10T12:23:31.877

1 How to create supports for the parts hanging above 45 degrees? 2019-06-03T05:58:00.617

1 3D printing overhangs that are over .200 in 2019-10-11T05:23:08.063

1 Surface Tension Support for FDM Printers 2019-12-22T01:49:00.243

1 creating support for a surface 2020-01-29T12:54:17.590

1 Supports and raft hard to remove Up Mini Printer 2020-02-16T00:22:46.807

1 PLA support material suddenly a problem on Ender 5 2020-04-21T21:57:05.927

1 PET-G grid print problem 2020-04-24T11:12:43.387

1 How to create a support structure in tinkercad? 2020-06-28T21:45:17.747

1 Is there a more efficient methods of removing support in a model? 2020-08-08T17:13:00.190

1 how to control fine details from overhanging part to not build upwards 2021-02-20T04:19:08.337

0 Cura how to fix "on air support" 2020-01-28T11:34:25.863

0 Overhanging section of part turns into spaghetti 2020-03-02T22:02:49.110

0 Prusa slicer and support material 2020-04-01T07:27:38.043

0 My 3D model is printing with missing parts when sliced in Ultimaker Cura 2020-04-30T06:37:04.533

0 Pretty ugly surface remains after using support ramp. Are my slicer settings correct? 2020-06-01T20:41:26.770

0 Prusa i3 MK3S supports fail to print on bed 2020-09-10T23:05:14.730