Tag: slic3r

13 Why do some models appear broken in slicing software? 2016-01-13T14:12:59.173

12 Slic3r - Can I add new infill patterns? 2016-03-14T22:55:19.037

10 How can I calculate volumetric speed for Slic3r auto speed? 2016-01-13T17:57:10.633

10 slic3r: Can I vary the infill percentage for different heights of my model? 2018-09-29T23:42:49.567

8 How can I set the 1st layer after a raft in Slic3r to print at 1st layer speed 2016-01-13T02:13:54.357

8 First (bottom) layer has gaps 2016-10-20T22:15:52.923

8 Skipping Y-steps, only when using Ultimaker Cura 2017-01-04T10:58:42.497

8 Cooling for big layers 2017-01-25T20:09:41.100

8 Getting started: shell passes not fusing in x/y, and a slanted wavy pattern on vertical walls 2018-01-05T21:42:41.060

8 What is wrong with my "disable sensor" gcode? 2018-05-15T10:53:34.563

8 Trouble printing small thin pole 2019-03-25T02:17:45.767

7 Heatbed control with Pronterface 2016-02-25T16:00:11.583

7 Slic3r mesh merging 2016-10-19T08:33:29.357

7 Why does my domed print have a thin shell? 2017-01-24T23:27:06.750

7 What causes gaps in small region fills and how to prevent them? 2017-02-11T03:09:37.180

7 Slic3r: How can I automatically modify the STL filename? 2018-07-01T02:19:17.693

7 Slicing problem - Slic3r prusa 2018-08-27T22:30:49.547

7 20x20x20 calibration cube size change after switching filament 2018-09-27T16:14:44.003

7 Ender 3 severe under-extrusion 2019-03-10T18:38:49.920

6 Marlin menu navigation slow while printing 2016-01-14T06:54:46.547

6 Slic3r under extrusion 2016-05-22T21:08:56.350

6 How to calculate the approximate volume of material used in 3d print? 2016-07-20T08:12:55.760

6 Slicing software and Sidewall 2016-10-22T04:58:26.293

6 What do the pink colors in Slic3r preview signify? If it signifies a problem, how do I fix it? 2017-04-17T15:16:58.367

6 Second layer of ASA print 'runs' 2017-05-03T11:08:47.357

6 Slic3r settings for flat slopes on top 2017-05-24T13:52:19.213

6 Print Nozzle Dragging and Smearing Filament while Printing 2017-10-17T19:58:04.243

6 Messy top layer with PETG filament? 2018-12-09T02:55:54.710

6 Where to get the Slic3r configuration files for the 3D PrinterWorks Creatorbot printers? 2019-02-06T15:57:30.457

6 What determines print start location on the build plate? 2019-10-23T18:52:53.020

5 Seamless prints? 2016-04-09T10:15:56.380

5 Why do I have problems trying to get Slic3r to load a config file? 2017-01-09T23:41:19.193

5 Where to find z coordinate in G-code for delta printer 2017-02-13T14:23:53.913

5 Parts of my (apparently manifold) model aren't appearing in my Slic3r preview 2017-05-13T01:29:36.787

5 How to change E0 to E1 on Marlin 1.1? 2018-04-19T15:13:05.347

5 Adding extra Z-offset to bed for PETG in Slic3r 2018-05-07T12:01:12.850

5 Why are there so many print speed parameters in slicers? 2019-04-04T03:14:38.240

5 G-Code for resetting to 100% speed 2019-04-15T20:11:55.320

5 Sunken and rough bottom layer 2019-04-16T19:37:27.397

5 Print not centered 2019-10-30T18:03:36.297

5 Starting G-code for auto Z probe offset 2019-10-31T02:56:02.650

4 Smooth finish in Slic3r using Support Material 2016-05-19T03:43:21.767

4 Why is my print getting messed up mid-print? 2016-06-17T19:28:37.910

4 First layer - not even infill 2016-08-14T14:14:45.807

4 How do I repeat the layers of Slic3r for every 3 infill layers with different angles? (Might need some programming knowledge) 2017-03-16T03:06:33.303

4 Having trouble getting first layer support to stick 2017-04-23T17:30:35.137

4 Slic3r not interpreting STL correctly 2017-06-03T04:59:14.227

4 How can I see what errors Slic3r have repaird? 2017-09-22T08:38:02.017

4 Using KISSlicer from command line on Linux? 2017-12-17T09:28:33.640

4 Nozzle reducing flow as it comes close to finish layer 2018-01-20T13:16:53.573

4 Weird underextrusion in vase mode? 2018-03-26T03:12:24.313

4 Change Slic3r settings for left handed coordinate system 2018-04-26T00:15:37.847

4 Why does slic3r get an error "302 moved temporarily" when uploading to OctoPrint? 2018-06-24T23:48:25.937

4 How to correctly print an object with supports 2018-10-22T00:34:40.537

4 Slic3r top layer issues, small gaps, weird extruder paths 2019-01-24T20:29:24.273

4 How is E value calculated in Slic3r? 2019-06-04T04:22:43.570

3 Offset in X or Y axis 2016-05-16T08:05:07.393

3 Why does Cura insert G0 commands between G1 commands while Slic3r doesn't? 2017-01-04T11:12:29.640

3 Slic3er throws "AMF parsing requires XML::SAX" 2017-02-11T00:45:50.530

3 Which firmware to use on printer settings for DIY printer 2017-10-28T00:46:40.167

3 How to generate gcode only for first layer? 2018-01-11T22:11:07.633

3 Only generate supports between object and bed (for a brain model) 2018-05-11T17:53:10.460

3 How to remove firmware warning 2019-03-17T11:54:34.550

3 Selective reinforcement of some places in my part 2019-05-13T20:36:41.750

3 How to get rid of deforming small prints? 2019-10-19T11:44:15.940

2 Does anyone know how Slic3r determines its infill adjacent strand spacing, instead of using fill density? 2017-05-20T11:55:22.813

2 First print origin 2017-09-17T21:31:32.960

2 See G-code before exporting 2018-07-02T17:33:27.813

2 How can I run two instances (or equivalent) of Slic3r on OS X? 2018-11-05T00:58:59.340

2 Why are my lowest layers not solid? 2018-11-29T18:34:58.660

2 Speed issue with Slic3r and Marlin 2018-12-05T16:13:32.183

2 Weird surface thing 2018-12-21T15:52:56.323

2 Wrong Z-Axis movement in G-Code 2019-02-12T03:11:14.980

2 How do I get circles on small interior holes to adhere to the bed? 2019-04-16T21:12:54.427

2 Minimum material deposit threshold in slic3r 2019-05-24T13:09:46.600

2 Prusa i3, MK3: Firmware updated to 3.8.0. Display shows white blocks 2019-09-24T14:40:07.727

2 What is M73 Q17 S43 G-code command? 2019-11-12T11:31:53.373

2 Temp Tower Setup Troubles -- Slic3r (How do you format G-Code {if} statements?) 2020-04-17T06:43:18.310

2 Inconsistent printing results using same settings but different calibration models 2020-04-24T17:31:55.343

2 Wrong calculation of E-parameter values 2021-02-09T14:35:40.067

1 Installing Slic3r on Kubuntu 14.04 with NVIDIA 2016-11-12T22:55:29.563

1 Slicer reports 1000s of errors not seen in Cura; Render is missing big chunks 2017-01-29T00:21:44.513

1 Does anyone know what kind of algorithm Slic3r uses to generate its toolpath? 2017-05-20T04:58:18.703

1 Prusa i3 Linux Mint Slic3r install problem 2017-10-17T22:12:26.687

1 How do Repetier coordinates setup work 2018-01-27T21:48:56.823

1 Subtract of two STL files in Slic3r software 2018-06-17T12:24:57.687

1 Periodical under extrusion with Slic3r 2019-01-24T12:40:37.363

1 Reproducing entire slicing configurations in Slic3r 2019-02-09T08:43:17.703

1 PLA infill/perimeter-layer to mimic real bone hardness 2019-05-22T05:27:53.360

1 Less filament from the half to the end 2020-04-03T10:07:32.847

1 ETA for print job showing negative in Repetier host 2020-04-14T23:23:00.863

1 Can carving templates be produced from G-code? 2021-01-16T22:27:42.480

1 Is there a well-tested Ender 3 printer profile for PrusaSlicer available for download? 2021-02-13T21:09:29.593

0 Good profile for slicing ABS in Slic3r? 2019-05-04T02:06:13.443

0 Ender 3 with slic3r causes the head to go off the bed 2019-12-12T18:07:04.847

0 Prusa slicer and support material 2020-04-01T07:27:38.043

0 Why on the Ender 3 does the hot end move too far on the Y axis after resuming print due to filament change? 2020-04-02T22:51:45.437

0 Pretty ugly surface remains after using support ramp. Are my slicer settings correct? 2020-06-01T20:41:26.770

0 Z-offset issues with Slic3r and Da Vinci Nano 2020-06-27T21:01:24.703