Tag: simplify3d

12 Isn't using the Extrusion Multiplier like cheating? 2019-03-01T13:56:00.977

10 Print fails at perpendicular boundaries 2016-10-22T18:09:26.053

7 Extrusion adjustment 2016-05-13T13:12:06.020

7 Why does print fall apart at beginning of top layer? 2016-10-12T06:31:51.507

7 Are self intersecting meshes dirty from a 3D printing perspective? 2016-12-27T17:56:50.160

7 Handling retraction when using a mixing extruder (2 in 1 out) 2019-04-10T15:01:21.300

5 What tweaks do slicers use to get rafts to stick? 2017-06-03T00:19:41.740

5 Filament starts extruding as soon as hotend reaches melting point 2018-02-06T13:48:19.880

4 Laybrick - Gaps on top layer 2016-10-03T15:01:39.083

4 How to print a 6" wheel in ABS? 2017-01-11T20:49:52.380

4 How can I stop the flare out of the bottom layers? 2018-04-24T02:51:26.850

4 Simplify3D setup for Athorbot Brother 3D Printer 2018-09-28T02:54:33.793

4 Is it possible to know which is the correct temperature range and speed for any model? 2019-05-01T17:56:17.063

3 Monoprice Maker Ultimate Extrudes Too Much Filament At Start 2017-05-24T04:29:47.617

3 How to prevent layer separation, when printing tall vase-like (tube) objects? 2017-08-15T09:28:01.347

3 Connecting my OctoPrint to a Google drive folder 2017-11-08T11:10:32.850

3 Simplify3D and Davinci mini 2018-02-20T22:49:31.387

3 Use Gcode Extrusion Speed in Calculations 2019-02-08T21:15:36.847

3 Simplify3D with error in preview? 2019-04-18T23:55:04.333

2 I can not really connect successfully to my printer via USB 2017-01-26T10:30:00.143

2 Is Simplify 3D really worth it? 2017-12-13T14:52:45.907

2 Z-axes out of sync with Simplify3D 2019-01-13T21:55:11.213

2 Extruder calibrated, but prints still oversized by .1 mm or so 2019-02-15T19:46:28.433

2 Can a model change size when using a different filament type? 2019-05-06T00:59:38.303

1 What is a w/t ratio? 2017-02-08T05:11:22.170

1 Is there a way to get more horizontal coverage out of "Vase Mode" in Simplify3D? 2017-09-12T01:14:27.913

1 Why does my DIY printer start printing in air? 2018-12-05T22:59:22.830

1 How reduce the number of retractions? 2019-05-08T22:59:41.807

1 Per-Model Bed Adhesion in Simplify3D 2020-02-24T01:47:47.720

1 Consistent blobbing and gaps in print towards right side 2020-04-08T18:41:17.503

1 Is there a possibility to add variable extrusion width to models with different wall features? (Simplify3d) 2021-02-01T10:59:53.950

0 Extruder temp is too high 2017-03-12T20:57:22.407

0 Simplify3D, connection disapear after slice 2020-01-30T17:30:55.370

0 Size change after the cut and print a model 2020-06-04T21:49:20.920