Tag: ramps-1.4

10 TMC2208 drivers - Microsteps configured incorrectly 2018-05-18T16:11:15.537

9 Tips for not burning out my Arduino Mega or catching something on fire when wiring a Prusa i3? 2016-01-13T16:47:37.063

9 Endstops will not trigger using Marlin Firmware 2016-10-29T17:26:57.503

9 How to configure Marlin to enable auto-fans with dual extruder 2018-01-04T13:32:02.013

8 Is this fuse a good choice for my Prusa i3's power supply and RAMPS 1.4? 2016-01-20T14:06:31.790

8 When building a RAMPS 1.4 based printer, can I safely plugin just some of the components to test if they are working? 2016-01-26T05:38:44.720

8 How to use a multimeter to test how many amps RAMPS is pulling? 2016-01-26T17:45:57.233

8 How do I wire the z-axis motors in parallel on the Prusa i3? 2016-01-26T18:20:41.537

7 Using an Arduino Mega with burnt voltage regulator 2016-02-18T15:14:56.080

7 Z motor not moving during auto home 2017-11-04T02:49:45.947

7 RAMPS 1.4, 1.5 or 1.6? 2018-03-12T14:52:47.610

7 Controlling more fans with RAMPS board 2018-08-02T12:25:20.660

6 Marlin menu navigation slow while printing 2016-01-14T06:54:46.547

6 Is Arduino Due a worth buy as controller electronics for deltabots? 2016-02-25T05:27:25.533

6 Should I comment out the code for what I am not testing when loading the test firmware for Ramps 1.4? 2016-05-04T13:19:59.970

6 Arduino Mega voltage regulator overheats with RAMPS board 2016-12-26T09:46:12.370

6 RAMPS won't PID tune and shows unreal temps 2018-03-12T05:31:51.617

6 Upgrading to silicone heat bed, will it burn my house down? 2018-09-23T09:50:33.600

6 Add a laser module to Reprap Guru Prusa i3 2019-05-17T20:19:47.090

5 parts for autoleveling Prusa i3 2016-03-01T17:23:07.397

5 Do the TW, THW and THHN or THWN wire insulation types matter in terms of powering RAMPS 1.4 or the MK2a Heat Bed? 2016-04-13T01:05:20.973

5 How drastic is reversing the polarity of the power supply to a RAMPS board? 2017-01-17T13:49:49.177

5 What does Marlin's G30 code do? 2017-05-08T20:42:26.763

5 Z axis issue with Ramps 1.4 2017-06-16T17:48:22.303

5 Step motors vibrate, don't move at all (Prusa I3) 2017-10-29T10:40:33.143

5 Filament starts extruding as soon as hotend reaches melting point 2018-02-06T13:48:19.880

5 Plug sdramps module and Anet A8 LCD together into RAMPS smart adapter 2018-03-23T09:54:50.250

5 Configuring BLTouch with Marlin firmware 2018-06-05T13:37:43.077

5 Heated Bed not heating on original Prusa i3. Using a Ramps 1.4 EFB 2018-06-11T21:11:53.317

5 Steps per mm of extruder are incorrect after rebuilding 2018-06-15T00:11:13.393

5 How to test Arduino Mega, RAMPS 1.4 and Full Graphic Smart Controller LCD? 2018-12-26T07:40:34.723

5 Where did I go wrong by trying to add an extra motor to my board? 2019-07-22T03:57:56.643

4 When building the ramps 1.4 is it safe to use small wires to jump the 5A, 12V power input over to the 11 Amp input 2016-03-15T18:21:53.590

4 Prusa i3 Dual Extruder Setup Issues 2016-04-24T23:59:13.337

4 Is there any opensource software that controls the RAMPS RepRap board directly from the computer? 2016-04-27T04:15:08.270

4 Connecting Sain Smart Mechanical End Stops to Ramps 1.4? 2016-07-04T22:48:21.577

4 Has anyone used a Shield Buddy (en lieu of a Arduino Mega2560) as the RAMPS 1.4 host board? 2017-01-16T21:09:56.540

4 3D printer test troubles (M999 error, motors do not move) 2017-03-09T20:04:52.797

4 Z axis at print is lower than when I home 2017-03-26T22:28:04.593

4 Printrun doesn't connect when 12 V is on 2017-06-09T16:12:34.507

4 Running laser on my printer 2017-07-13T00:24:03.900

4 Temperature problems after switching to RAMPS 1.4 2017-10-21T11:01:56.663

4 RAMPS 1.4 losing power with more than 3 drivers mounted 2017-11-08T10:13:57.053

4 Z axis Stepper motors not working correctly 2018-01-20T06:40:23.790

4 How to connect a NEMA 17 stepper to RAMPS 1.4? 2018-03-17T20:57:46.850

4 Ramps 1.4 with a power brick 2018-04-11T16:56:42.127

4 Speeding up the heating of the heated bed 2018-05-02T23:36:12.267

4 Laser Engraver with Smoothie, RAMPS 1.4 or AWC708C? 2018-06-23T14:41:38.567

4 Arduino WEMOS and RAMPS 2018-07-07T09:31:29.617

4 Cooling fan spins extremely fast, noisy on startup 2018-07-14T11:26:03.753

4 MKS board losing power after endstop installation 2018-08-16T15:00:02.430

4 Stepper motors are not working when connected with RAMPS 1.4 2018-08-27T05:08:44.890

4 Why did my power supply fuse blew out on my Anet A8? 2019-02-10T15:26:53.770

4 After some time stepper motor is hot 2019-03-17T02:26:19.157

4 How do I calibrate temperature control in a Repetier firmware? 2019-03-22T18:33:23.050

4 Pronterface not connecting ERROR: A device attached to the system is not functioning 2019-04-24T19:20:24.317

4 Laser LA03-5000 wiring to RAMPS 1.4 2019-05-29T11:51:22.883

4 Digital vs. analog pins 2019-07-21T02:57:43.977

3 HE3D-XI3 3D printer Repetier software config help! 2016-03-19T16:25:56.870

3 How do I determine that the electronics are working with the test firmware? 2016-04-14T04:09:00.080

3 Why am I not seeing an effect from an M42 command on Marlin? 2017-01-12T23:39:15.127

3 Y-axis slipping causing failed prints 2017-11-10T18:34:40.830

3 Printing Chocolate with Ramps 1.4 2018-02-02T23:01:23.743

3 Weird Movement and not homing 2018-03-26T16:06:20.553

3 Can I use external stepper motor power and USB connection 2018-04-09T06:13:29.317

3 Homing a stepper motor as an extruder using E0/E1 with an limit switch and end stop 2018-04-12T05:36:23.263

3 Z-Axis doesn't work only during printing 2018-07-18T04:37:16.450

3 RAMPS PLUS 2 and E1 socket problem (K200 Delta, but related to the PCB , not printer) 2018-07-26T20:40:18.700

3 Reprap RAMPs over heating issues 2018-09-21T04:23:35.593

3 Limit Switch problems on RAMPS 1.4 and custom built 3D Printer running Marlin 1.1.0-rc6 2018-12-29T17:15:59.193

3 4pin fan on RAMPS board - direct? 2019-03-28T04:58:13.313

3 RAMPS 1.4 Stepper's not getting a good signal 2019-08-11T11:57:41.727

3 Replacing RAMPS 1.4 for 1.6 2019-08-21T18:12:22.117

2 Is my 5A polyfuse on my RAMPS board bad? 2017-08-26T07:41:27.943

2 Double Image Along X Axis 2017-11-11T01:24:13.490

2 RAMPS board - no power to heatbed 2018-12-16T11:54:45.253

2 Connecting Anet 8 2004 display with Ramps 1.4 to Aux2 can't seem to figure it out 2019-02-11T22:12:06.680

2 Display locks when executing G-code for laser cutting using Marlin on RAMPS board 2019-06-08T18:04:12.853

2 Marlin on Arduino Mega 2650 and RAMPS 1.4 2019-08-02T07:37:20.783

2 How to extend Marlin to support additional movement axis? 2019-09-25T10:40:53.180

2 Which 3D printer controller should I use? 2020-04-02T02:20:31.650

1 Z motors work synchronously ToyRep 2017-11-11T11:22:26.400

1 Bed Heating Failed, Printer Halted, Please Reset 2019-02-04T13:32:22.127

1 CoreXY with 8 bit board problems 2020-08-05T12:17:46.280

1 Problems with the right Z axis 2020-09-23T19:24:17.353

1 Confusing stepper motor behavior 2021-02-09T19:51:06.130

0 Arduino and Ramps powering up 2018-04-06T05:18:29.500

0 Using ramps on-load 2018-04-10T05:35:41.457

0 TMC2130 External VM RAMPS1.4 2019-05-13T13:40:58.857

0 Grayscale laser engraving with Ramp1.4 2019-05-23T00:14:25.290

0 Stepper motors not working when connected to RAMPS 1.4 2020-01-20T12:28:35.880

0 Makerbase MKS Slot2 V1.0 + RepRapDiscount Full Graphics LCD + RAMPS 1.4 2020-03-28T11:25:38.903

0 Stepper motors won't move on RAMPS 1.4 2020-03-28T12:09:04.307

0 RAMPS 1.4 LED 2 blinking when trying to heat up bed 2020-05-12T17:59:49.540

0 Auto bed leveling with stepper motor lock 2020-06-23T08:59:07.580

0 Three RAMPS boards wasted by plugging in a heated bed 2020-08-12T06:06:16.787

0 MOSFET burned and high heated bed resistance 2020-08-21T17:11:25.637

0 Mixing nozzle vs dual nozzle vs IDEX vs tool changer for pva and pla 2020-08-30T14:09:45.120

0 Heated bed is not heating up 2020-09-09T12:06:58.863