Tag: prusa-i3

14 Using dollar-store picture glass for print bed on top of original heated aluminum bed? 2016-08-10T15:50:17.600

11 Lines of PLA not sticking to the bed 2017-03-05T20:45:52.083

10 Why does my PLA filament form a spiral shape and clog my extruder? 2016-05-03T18:08:00.367

10 How does the home position work on a Prusa i3 RepRap Printer? 2016-08-04T15:17:32.630

9 Tips for not burning out my Arduino Mega or catching something on fire when wiring a Prusa i3? 2016-01-13T16:47:37.063

9 Prusa i3 hotend not getting to the temperature that I want (180 to 230 celsius) 2016-09-20T15:49:55.283

9 Z offset incorrect 2016-10-08T10:04:48.197

9 Z axis top brackets, of P3Steel, differ between v1.x/2.x and v4 2016-11-03T21:36:24.987

9 3D printer stepper motors only going one direction and skipping in the other 2017-12-22T22:12:51.127

8 How do I wire the z-axis motors in parallel on the Prusa i3? 2016-01-26T18:20:41.537

8 Teflon tubing in nozzle throat coming out? 2016-03-31T07:14:05.890

8 Auto Bed-Leveling with Inductive Proximity Sensors and Magnets 2016-05-07T22:56:22.680

8 Extruder is running backwards? 2016-06-17T07:13:19.360

8 Z-axis steppers and bed alignment problems 2016-11-21T10:47:13.383

8 What is this called and where can I buy a replacement? 2017-11-14T05:16:41.043

8 Getting started: shell passes not fusing in x/y, and a slanted wavy pattern on vertical walls 2018-01-05T21:42:41.060

8 What is wrong with my "disable sensor" gcode? 2018-05-15T10:53:34.563

8 Does Octoprint stop printing on Crash Detection? 2018-09-11T05:34:32.090

8 Trouble printing small thin pole 2019-03-25T02:17:45.767

7 How is a J-Head Extruder Head attached to the Prusa i3 rework? 2016-01-16T13:28:24.050

7 Z Axis getting stuck with Marlin 1.1.0-RC7 2016-08-09T04:55:36.843

7 What causes gaps in small region fills and how to prevent them? 2017-02-11T03:09:37.180

7 Marlin's bed leveling Mesh Validation Pattern ignoring home offset 2018-02-05T17:38:06.503

7 Does anyone know the thread size (pitch and lead) of the Anet A8's lead screw? 2018-03-17T08:28:28.860

7 Issues with Proto-pasta filament extruding on prusa mk3 2018-06-16T14:01:06.227

7 Screeching Noise when moving the Z-Axis Down 2018-10-27T16:37:48.750

6 What kind of silicone glue should I use to attach my thermsistors? 2016-03-20T00:06:31.977

6 Beginner in calibrating HE3D Prusa XI3 2016-03-22T00:19:31.560

6 Which algorithm does Marlin use to create arcs? 2016-04-01T23:18:49.420

6 Is cutting the arm off the Z-axis switch a good idea? 2016-11-08T19:22:30.303

6 Why are my prints so defective? 2017-01-26T16:32:33.657

6 How can I avoid that a small bit of filament sticks out of the nozzle during heating? 2017-04-19T15:29:40.200

6 Second layer of ASA print 'runs' 2017-05-03T11:08:47.357

6 Print Nozzle Dragging and Smearing Filament while Printing 2017-10-17T19:58:04.243

6 Filament not extruding 2017-11-07T17:12:26.207

6 3d printer drip problem 2018-02-18T19:08:54.457

6 Lead screws - M8 instead of M5? 2018-03-05T12:49:58.393

6 Support material first layer adhesion issues 2018-03-28T12:13:05.263

6 What's the best way to clean PETG residue from a magnetic steel sheet PEI? 2018-04-10T14:44:26.957

6 Line width changes depending on the direction the print head moves 2018-06-29T10:25:09.957

6 Infill is rough - how to enhance? 2019-02-11T21:34:42.023

6 Is this hot end salvageable? 2019-02-12T19:00:05.360

6 Add a laser module to Reprap Guru Prusa i3 2019-05-17T20:19:47.090

6 Change hotend thermistor input in Marlin 2019-06-08T18:37:34.153

5 Why does my MKS Base not recognize my thermistors? 2016-02-06T13:53:01.323

5 parts for autoleveling Prusa i3 2016-03-01T17:23:07.397

5 Are the thermsistors identical for both the heatbed and the extruder head? 2016-03-25T13:48:11.593

5 Is there a reason for the z-axis M5 drive nut to be super loose on the lead screw? 2016-03-26T08:53:37.860

5 Seamless prints? 2016-04-09T10:15:56.380

5 What is causing these artifacts when the extruder moves in one direction? 2016-05-09T02:30:57.717

5 OctoPrint webpage freezes (Setup on a Raspberry Pi running Raspbian) 2016-07-11T02:08:16.220

5 Uploading Repetier firmware to Arduino? 2016-07-31T16:15:33.237

5 3d prints come up with ribbing on one side 2017-01-09T03:42:51.423

5 Alunar m508 Firmware 2017-09-27T03:31:38.793

5 Small part bed adhesion 2017-10-18T02:44:17.407

5 Prusa i3 - First layer does not stick and looks jagged 2017-10-20T02:19:53.487

5 Step motors vibrate, don't move at all (Prusa I3) 2017-10-29T10:40:33.143

5 I am looking for the aluminum profile parts specs for this prusa i3 printer? 2017-11-25T16:08:32.823

5 My printer is printing a messy ball. CTC prusa from Ebay 2018-01-06T19:01:30.123

5 Changing the home position on a Prusa i3 MK2 2018-02-20T17:13:26.473

5 What setting is this defect caused by? 2018-03-17T19:43:35.993

5 MK8 extruder showing 500+ °C on temperature sensor? 2018-03-18T21:41:31.840

5 Prusa i3 PLA fails to stick to first layer on curves 2018-03-27T21:08:41.993

5 Heated Bed not heating on original Prusa i3. Using a Ramps 1.4 EFB 2018-06-11T21:11:53.317

5 How can you calibrate extrusion multiplier value in Slic3r WITHOUT changing printer settings in memory? 2018-08-21T08:19:49.693

5 Is it ok for stepper motors to be hot? 2018-10-27T11:01:33.287

5 Prusa i3 pro b second layer failure 2018-10-29T09:56:29.457

5 Prusa i3 Mk3 - Top layer wrinkles (not on buildplate) 2019-03-01T08:02:50.363

5 Power OctoPi from printer 2019-05-03T20:25:15.183

5 Is there a way to print with ABS without enclosure? 2019-06-25T07:49:58.890

5 Thermal runaway on extruder hotend 2019-11-09T09:46:46.843

5 First layer looks weird and print fails 2019-11-30T16:54:34.203

5 What type of plug is this? 2020-09-02T12:54:46.087

4 Prusa XI3 Extruder Calibration 2016-03-26T15:27:18.303

4 Prusa i3 Dual Extruder Setup Issues 2016-04-24T23:59:13.337

4 Setting Resolution? 2016-08-05T04:34:29.177

4 Alignment of dual Z-axis steppers 2016-11-18T15:22:54.970

4 What solder specs are safe to use when soldering wires to an Mk2a heat bed? 2016-11-23T23:03:02.837

4 Printer homes to z stop-switch, but presses on heatbed during printing 2017-02-15T02:17:27.410

4 Prints falling off the bed towards the end of the print 2017-02-20T23:19:10.480

4 Z-axis not moving up 2017-06-12T01:47:10.257

4 prusa i3 not extruding enough plastic 2017-09-05T05:39:28.723

4 Is my 3D printer totally dead? 2017-10-02T16:29:13.293

4 Extruder motor not running during print job but working after I preheat the extruder and test it 2017-11-07T04:01:31.617

4 Has anyone encountered this type of strange print patterns? 2018-02-16T18:54:26.553

4 Print slipped away 2018-04-12T21:40:23.060

4 How can I stop the flare out of the bottom layers? 2018-04-24T02:51:26.850

4 Uneven wall thickness with test cube 2018-05-20T11:34:41.073

4 Extruder clogs randomly during print 2018-05-28T13:37:04.637

4 How to sort G-code on SD card based on material (ABS|PLA|SBS)? 2018-06-04T07:42:42.550

4 Not able to insert hobbed drive and filament in the extruder drive 2018-06-19T11:53:31.143

4 How to calculate linear Y rod length for a larger replacement bed? 2018-07-12T21:17:30.247

4 Adjusting Z-axis (Monoprice Maker Select) 2018-07-13T22:17:48.610

4 What is wrong with my first layers? 2018-10-18T02:42:17.437

4 How to correctly print an object with supports 2018-10-22T00:34:40.537

4 Getting worse quality prints on 0.05 mm than on 0.10 mm layer height on Prusa i3 MK3 2018-11-20T08:49:40.470

4 Prusa i3 MK3 latest release first layer calibration issues 2018-12-15T11:41:11.013

4 Can I repurpose most of the components of this Prusa clone for a Delta? 2019-05-03T16:20:34.980

4 Advice for 3D modeling peg for sprinkler dripper 2019-05-28T04:01:33.180