Tag: post-processing

53 How do I give 3D-printed parts in PLA a shiny smooth finish? 2016-01-12T19:07:53.343

20 Are there any ways to make a 3D print transparent? 2016-01-12T19:25:52.270

18 Drilling 3D-printed plastic 2016-01-23T04:38:20.710

18 What glues for PLA? 2018-08-23T12:08:25.053

17 What can I use to "sand" my ABS prints? 2016-01-13T00:41:32.907

15 How to remove white marks from PLA 2016-02-24T21:40:06.150

12 How to easily get rid of rafts and support structures? 2016-01-12T19:28:09.363

11 Prints are now sticking too well to the bed. What to do? 2016-08-30T18:51:04.977

10 Secure disposal of 3D prints 2018-09-03T22:44:17.647

9 Practical concerns smoothing PLA print with chloroform vapours 2016-02-23T10:53:12.347

8 Water does not flow through 4 mm hole when there is a small amount, how to let water flow through small hole even when there is low pressure? 2020-10-19T20:12:14.943

7 Maintaining fine details while applying smoothing methods 2016-01-22T06:03:58.597

7 Bonding PETG to glass 2016-05-27T06:57:33.030

6 What is the best way to connect 3D printed parts? 2016-01-12T20:24:44.003

6 Is Tetrahydrofuran viable for dissolving PLA and sticking PLA objects together? 2017-02-14T00:04:24.520

6 Sandable primer suitable for PLA? 2018-12-31T23:30:24.843

6 How do I remove a 3D print stuck to the glass build plate 2019-12-29T16:55:22.417

5 How to smooth the surface of parts printed with Co-polyester (PET) filament 2016-01-18T10:29:58.050

5 Stone-look surface via painting? 2016-05-04T15:35:03.997

5 How to remove a PLA print stuck to a BuildTak sheet 2016-05-20T21:12:01.043

5 How do I give 3D-printed parts in ABS a shiny smooth finish? 2017-05-19T14:16:04.457

5 How should I go about printing easily removable rafts? 2017-09-27T21:50:05.010

5 Glue for attaching PLA pieces to titanium 2018-02-06T18:00:34.917

5 PLA coating for water irrigation 3D printed parts 2018-04-26T07:20:18.510

5 How can you both reliably print and remove your item, without breaking it when detaching it? 2018-05-26T22:41:12.177

4 Cement or another solid pore filler suitable for ABS? 2017-11-13T16:09:55.073

4 How to remove exess filament from bed after removing model 2018-12-31T00:30:06.857

4 Would PC be considered food-safe in this setup? 2019-11-04T14:32:13.430

4 Methylated spirits or turpentine to clean resin printer? 2020-02-08T01:23:44.070

3 What kind of colors should I use to paint my PLA prints? 2017-02-12T21:12:26.957

3 Post processing FDM for strength 2017-03-12T01:49:56.653

3 How could I print a large sphere-like object? 2018-12-21T18:39:06.110

3 What alternatives are there to sanding resin parts with fine details? 2019-06-25T09:09:19.393

3 Finishing sunken text in 3D prints 2019-08-26T16:57:33.060

3 Painting Text on Model 2019-11-14T17:57:47.840

3 overlaying epoxy resin on PLA 2019-12-02T14:11:26.753

3 What glues to use for PETG? 2020-02-05T11:40:25.890

2 Methods for smoothing 3D objects 2016-01-27T16:25:12.577

2 Is it possible to 3D print sharp objects with high details? And how? 2017-04-21T15:53:52.980

2 Tips for printing and being able to get of base easily 2017-12-15T20:50:23.290

2 Unbonding Hot Glue 2019-04-23T22:44:15.120

2 Anyone tried Varathane water-based Wood Stain on Hatchbox Wood PLA? 2019-05-08T22:49:37.970

2 What kind of paint and varnish can be used with ABS? 2019-08-26T15:35:51.773

2 Curated resin size shrink (and methods to reduce it) 2020-08-19T11:25:11.097

2 What's the best way to connect pieces of a large print after printing? 2020-11-25T16:56:13.433

2 How to get superglue off PLA filament? 2020-12-12T18:30:52.740

1 FDM, ABS Post-processing methods 2017-03-20T00:12:31.033

1 Which 3D printer should I use to make custom miniatures for a tabletop game? 2017-06-23T20:17:19.010

1 How to paint ABS to look like wood 2018-11-26T11:23:30.187

1 How to attach a metal bearing to a print 2018-12-14T18:19:40.210

1 Silicone spray as a release agent? 2018-12-18T19:29:32.543

1 Sealing PLA & oil-based art supplies? 2019-02-28T19:07:38.633

1 Can I use Araldite to stick PLA to metal frame? 2019-03-27T13:03:24.617

1 Nail polish remover that won't dissolve ABS? 2019-09-20T02:17:29.713

1 Will Mod Podge work with PLA prints? 2020-01-26T01:13:43.257

1 How to smooth PLA Prints without using sandpaper, solvents or paint 2020-02-17T20:35:35.440

1 Why is a mold required in isostatic pressing after performing Sintering 2020-02-20T15:19:08.533

1 SLA resin post-processing: gluing parts together 2020-08-19T12:06:53.827

1 SLA printers: safety with resin contaminated disposals 2020-08-19T21:00:18.697

1 Can 3D printer work with enamel paints (or paints generally)? Are such printers available? 2020-11-20T11:50:47.697

1 Accidentally over curing a 3D print 2020-12-29T20:53:37.697

0 Sealant to increase Water-Resistance of SLS print 2019-10-17T16:28:29.920

0 What is the best method to use to glue ABS parts together? 2020-03-11T08:36:22.547

0 Making a 3D printed surface easily cleanable 2020-03-13T20:25:13.257

0 Metal sintering layer-by-layer with DLP 2020-03-31T08:32:34.897

0 Can parts that have warped (after being printed) be un-warped? 2020-08-23T08:06:32.423

0 Good lubricants for moving parts? 2020-09-24T14:01:22.040

0 Post-processing and filaments for weather-proof electronic enclosure 2020-11-03T13:56:33.820

0 Clear coating resin 3D prints 2020-12-03T04:30:44.787

0 Gluing paper to PLA objects 2021-01-17T16:23:14.247

0 Apply / find / create a stainless steel coating to apply to a PETG or PLA part to make it react to a magnet 2021-02-04T06:56:09.140