Tag: pla

53 How do I give 3D-printed parts in PLA a shiny smooth finish? 2016-01-12T19:07:53.343

37 How is PLA different from ABS material? 2016-01-12T18:53:53.623

31 How to recycle filament material from printed parts? 2016-01-12T20:37:19.573

23 Does filament have to be stored in an airtight environment? 2016-01-12T21:57:01.307

23 What is PLA+? How is it different from PLA? 2017-11-15T12:06:11.210

19 What are the reasons for my 3D prints having large numbers of strings between parts of a layer? 2016-01-12T20:16:01.823

19 What to do with failed/unwanted 3D prints? 2016-06-06T04:59:03.687

19 Can aged PLA be refurbished? 2016-06-22T12:35:46.923

18 Can I mix ABS and PLA when recycling filament? 2016-01-14T21:48:19.053

18 What glues for PLA? 2018-08-23T12:08:25.053

16 Can you put PLA parts in your car (in the sun)? 2018-06-07T19:31:09.973

15 How to remove white marks from PLA 2016-02-24T21:40:06.150

14 Using dollar-store picture glass for print bed on top of original heated aluminum bed? 2016-08-10T15:50:17.600

14 Why keep the bed heated after initial layer(s) with PLA (or PETG)? 2019-07-25T08:46:26.333

13 Uses for PLA scraps 2017-05-12T16:21:31.593

12 Troubleshooting poor adhesion at the edge of the bed 2016-01-15T16:33:07.330

12 Is PLA filament conductive? 2017-02-01T16:43:29.490

12 What causes ripples on part of first layer? 2018-10-22T14:56:41.200

11 Does the layer thickness have any effect of the strength of the 3D printed object? 2016-07-02T07:41:12.473

11 Prints are now sticking too well to the bed. What to do? 2016-08-30T18:51:04.977

11 PLA use outdoors? 2016-10-22T11:11:31.227

11 Lines of PLA not sticking to the bed 2017-03-05T20:45:52.083

10 Why does my PLA filament form a spiral shape and clog my extruder? 2016-05-03T18:08:00.367

10 Grease for PLA sprocket 2016-05-29T10:44:52.647

10 PLA and bed heating? 2016-12-14T19:45:53.583

10 Why doesn't PLA stick to heated bed? 2019-11-03T15:41:37.627

9 Practical concerns smoothing PLA print with chloroform vapours 2016-02-23T10:53:12.347

9 Any fix for PLA prints getting more brittle over time? 2016-06-21T19:54:41.557

9 Prusa i3 hotend not getting to the temperature that I want (180 to 230 celsius) 2016-09-20T15:49:55.283

9 Do I need a heated bed for printing PLA in an enclosed printer? 2016-10-17T05:36:23.760

9 First layer overlap on one side 2016-12-16T18:28:38.123

8 Irregular 3D printed part 2016-07-15T19:49:40.867

8 M3D Micro printer stops extruding but is not clogged 2016-09-17T19:17:52.940

8 Weird bumps cylindrical hole 2016-10-22T15:25:37.193

8 What makes a good PLA filament? 2016-10-25T17:14:38.847

8 3D printing problem: waved walls 2017-02-09T12:20:48.520

8 Using the end of a spool 2017-11-03T13:12:05.397

8 Getting started: shell passes not fusing in x/y, and a slanted wavy pattern on vertical walls 2018-01-05T21:42:41.060

8 Getting PLA to stick to a cold bed 2018-02-14T06:52:42.273

8 How to eliminate stringing and regulate flow rate? 2018-08-03T19:42:13.433

8 Serious safety concerns with living in same room as PLA 3D Printer? 2018-08-23T06:02:36.050

8 Constant under extrusion and filament grinding 2018-08-27T13:17:40.447

8 How do I know when filament is getting old, and what things can I do to correct for it? 2018-08-30T16:30:23.963

8 Is there a way to save a multi part print if one fails? 2020-07-23T12:23:04.443

7 Can I repair my microwave with a PLA part? 2016-08-23T08:51:20.780

7 Poor adhesion only for first couple of inches 2016-10-14T00:54:25.423

7 Can I really throw failed PLA prints on compost? 2017-02-15T13:08:29.087

7 Infill pattern comparison 2017-02-21T08:21:29.327

7 ABS or PLA for structural printed parts? 2017-04-30T13:12:33.240

7 missing small sections of layers after a retraction 2017-10-04T06:54:47.300

7 Nozzle always "randomly" moves to 0 during print, then resumes 2017-12-02T19:39:42.413

7 How can I get PLA or PETG to stick to a glass bed permanently without adhesives? 2018-01-13T19:38:05.523

7 Filament clogging just above feeding tube - Duplicator 6 2018-03-27T15:30:40.190

7 Why does my part-cooling fan cause stringing? 2018-09-10T22:44:53.173

7 Does PLA block wifi signals? 2019-03-27T12:04:42.583

6 How can I optimize my print for casting in metal? 2016-01-13T20:30:30.690

6 Should I consider health impact of ABS or PLA when printing cookie cutter? 2016-05-31T16:52:13.810

6 What are the costs per meter of filament for PLA, ABS and PET? 2016-06-29T16:48:35.167

6 How to debond cyanoacrylate glue from pla 2016-09-14T16:54:34.943

6 How to create attachable/detachable printed parts 2016-09-18T23:08:15.470

6 Recommended settings for ColorFabb Copperfill Filaments on a 0.25 mm Nozzle? 2016-11-29T01:19:32.740

6 Is Tetrahydrofuran viable for dissolving PLA and sticking PLA objects together? 2017-02-14T00:04:24.520

6 Building a pivot linkage for servo steering with 3d printed parts. 2017-02-20T07:21:00.953

6 Should you use hairspray on a metal bed 3D printer? 2017-03-10T23:27:48.510

6 Why 3d print has an ugly surface? 2017-04-01T18:54:27.047

6 Print Nozzle Dragging and Smearing Filament while Printing 2017-10-17T19:58:04.243

6 How do you assure that you print layers that bond correctly? 2017-11-15T11:26:41.307

6 3d printer drip problem 2018-02-18T19:08:54.457

6 Getting bumps/warts on surface, Cura doesn't want to comb? 2018-05-15T02:36:57.383

6 Considerations when pausing a print job 2018-12-19T16:32:44.270

6 Sandable primer suitable for PLA? 2018-12-31T23:30:24.843

6 Filament extrusion always stops at some point during print 2019-01-16T13:39:33.697

6 PLA printings always ~0.22% larger 2019-10-17T00:04:54.390

5 What does a "3 h5" mean in reference to the axle of a motor? 2016-04-15T12:29:19.757

5 Hatchbox Silver PLA settings? 2016-05-04T15:03:36.370

5 Glue sticks for print bed 2016-05-06T15:34:40.387

5 How to remove a PLA print stuck to a BuildTak sheet 2016-05-20T21:12:01.043

5 First Layer problems? 2016-06-29T04:43:36.577

5 How to unclog a clogged extruder? 2017-01-29T14:39:53.090

5 Bed design for magnetic easy release when printing PLA 2017-01-30T15:53:33.413

5 After 1.5 hours of printing quality degraded 2017-07-12T21:53:57.797

5 Small part bed adhesion 2017-10-18T02:44:17.407

5 My printer is printing a messy ball. CTC prusa from Ebay 2018-01-06T19:01:30.123

5 What is "HDPLA", and why is it so hard to find out more about it? 2018-01-12T01:45:22.337

5 My extruder does not reach the set temperature 2018-02-03T22:46:58.343

5 Filament starts extruding as soon as hotend reaches melting point 2018-02-06T13:48:19.880

5 Glue for attaching PLA pieces to titanium 2018-02-06T18:00:34.917

5 Temperature offset on Wanhao Duplicator i3 Mini 2018-03-24T12:45:34.063

5 Prusa i3 PLA fails to stick to first layer on curves 2018-03-27T21:08:41.993

5 PLA coating for water irrigation 3D printed parts 2018-04-26T07:20:18.510

5 Extrusion stops during print 2018-06-09T10:47:22.053

5 Printing rectangular grid 2019-01-07T07:37:34.100

5 Heatercartridge bolt stuck 2019-01-08T15:28:58.513

5 3D printed part sticking to the support layer 2019-02-28T14:43:50.433

5 How to fight lots of stringing with PLA at low temperature (185 °C)? 2019-08-11T11:17:25.210

5 PLA Filament Not Softening During Load w/ FlashForge Creator Pro 2019-10-14T00:00:36.013

5 Fixing Z-Hop Stringing 2019-12-16T01:03:52.490

4 Why is my print getting messed up mid-print? 2016-06-17T19:28:37.910

4 is PLA gasoline, diesel or chemical resistant? 2016-10-16T19:29:07.013