Tag: petg

14 Why keep the bed heated after initial layer(s) with PLA (or PETG)? 2019-07-25T08:46:26.333

9 PETG Collecting on the Extruder 2016-03-09T15:57:50.437

7 PETG layer adhesion 2019-05-26T20:16:06.960

6 Messy top layer with PETG filament? 2018-12-09T02:55:54.710

6 Question about retraction distance and stringing/print quality with PETG 2019-02-07T20:08:58.047

5 Does PETG fade in the sun? 2018-10-01T17:30:20.100

5 PETG filament doesn't stick reliably to fake Buildtak surface 2018-10-06T05:27:46.417

5 How to work with PETG? Settings, caveats, etc 2019-06-17T13:50:30.493

5 Thermal Runaway E1 at Layer 2 2020-12-17T12:30:03.440

4 QIDITECH Dual Extruder and PETG 2017-12-09T14:38:18.940

4 Can I dry PETG filament under sun? 2019-03-25T11:29:23.553

4 Prusa i3 MK3S 3D printer PETG printing problems 2019-06-22T19:50:22.753

4 PETG on Ender 3 2019-07-01T05:12:04.783

4 Under extrusion... sometimes 2019-08-31T17:55:04.807

4 Bumpy first layer with PETG 2019-10-15T11:26:28.527

4 Thermal runaway with specific prints 2019-11-22T13:00:47.630

4 PETG grinding with direct drive extruder 2020-08-17T03:39:07.797

3 Is PETG filament food safe? 2019-02-09T14:23:58.727

3 PET-G under-extrusion after changing the nozzle to a 1.2 mm d. one (Prusa i3 mk3s and PrusaSlicer v2.0) 2019-07-10T21:25:07.453

3 Retraction Jamming Problem! 2019-07-13T16:53:17.173

3 Does acid dissolve PETG 3D prints? 2019-08-22T16:07:37.677

3 Horizontal defects when linear_advance enabled? 2019-09-14T22:53:10.930

3 What glues to use for PETG? 2020-02-05T11:40:25.890

3 Why could my opaque PETG be printing "transparent" in certain places? 2020-02-06T19:45:33.203

3 Why does PETG require slower speed? 2020-04-14T13:13:00.820

3 Can PETG be used as support material for PLA? 2020-06-23T13:38:58.787

3 Visible lines along Y-axis on Ender 3 Pro 2020-06-24T18:12:01.233

2 How to level bed after applying glue stick for bed adhesion 2019-02-01T07:03:26.667

2 PETG Sticking to Nozzle 2019-02-19T02:47:51.657

2 Printing with PETG, printer says it's out of filament when it clearly is not 2019-07-08T21:32:38.357

2 How to solve burnt blobs on Prusa MK3S (PETG)? 2020-05-23T21:00:59.777

2 PETG warping - adhesion or temperature too high? 2020-08-02T15:20:15.467

2 Z banding issue 2021-02-16T13:09:02.410

1 PETG nozzle clearance and extrusion multiplier 2019-01-25T09:36:01.657

1 Printing Filatech PETG with HyperCube E3Dv6 Clone fails after 3 smooth layers 2020-01-27T07:59:17.187

1 How can I add an offset to the first layer to increase clearance? 2020-04-03T16:52:31.170

1 PET-G grid print problem 2020-04-24T11:12:43.387

1 Upgrade hot-end to achieve higher temps (e.g. for PETG) 2020-06-09T21:04:27.450

1 Problem printing bigger models in the Ender 5 2020-08-25T18:06:18.027

1 MINTEMP BED Fixed error when running consecutive print 2020-09-15T18:22:11.730

1 What is the best build surface for PETG? 2021-01-06T13:09:21.887

1 Will glue sticks form a barrier on a build surface to prevent PETG from damaging the surface? 2021-01-07T13:58:07.187

0 New PETG spool from eSUN is making popping sound while extruding 2020-01-24T12:16:43.663

0 What is the best technique to improve removing PETG from the print bed? 2020-11-12T17:16:41.670

0 What material should I upgrade the teflon tube to? 2020-11-29T00:55:11.990

0 How well does a polyimide build surface work with PETG? 2021-01-05T15:32:06.390

0 How to stop stalagmite formation with translucent PETGs 2021-01-25T19:59:37.257

0 How to switch from PETG to either PLA/ABS mid print? 2021-01-27T17:00:50.830

0 Apply / find / create a stainless steel coating to apply to a PETG or PLA part to make it react to a magnet 2021-02-04T06:56:09.140