Tag: mechanics

23 Do stepper motors require any maintenance? 2016-01-13T04:14:31.923

15 Differences between moving build plate vs. extruder 2016-06-17T00:00:34.130

8 z-axis hard to move in some areas - what could be faults, how to improve? 2016-03-11T17:42:53.527

8 How does Carbon3D's CLIP technology handle bridges and support material? 2016-04-11T03:30:22.983

6 Are 3D printed gears applicable for industrial use? 2017-12-16T15:41:51.290

6 Cooling fan noise when head is moving in the X axis 2018-03-11T11:32:40.657

5 Is there a reason for the z-axis M5 drive nut to be super loose on the lead screw? 2016-03-26T08:53:37.860

5 How to transport a 3D printer? Dismount needed? 2016-06-09T06:56:11.857

5 3d print lean in Y-axis 2017-11-03T21:51:33.737

5 What is the best method of printing joints for action figures? 2018-09-29T20:44:29.700

5 FreeCAD to design moving parts 2018-10-08T19:40:38.577

5 How fast can printer head move without damaging steppers? 2019-01-31T12:11:22.043

4 Is there a lubricant that can be used for linear bearings, bronze sinter bushings and threaded rods alike? 2016-04-05T08:00:56.557

4 Herringbone timing belt? 2019-09-19T23:53:02.997

3 How much work would be converting Prusa firmware/software for CNC use? 2016-06-19T18:21:47.690

3 Printing a non-self-aligning caged deep-groove ball bearing 2016-11-15T12:51:23.607

2 TAIG CNC - Z axis getting bound 2017-04-10T13:07:30.243

2 P3Steel v4 w/ 20x30 cm bed, or 2.5.1 w/ 20x20 2017-05-03T23:59:04.813

2 Moving Extruder Gear Assembly 2018-12-20T21:02:58.697

1 Ender 5 (Plus) - Gantry not square to frame, how to fix? 2020-09-20T05:25:54.403

0 Is there a spiral lid mechanism 2020-02-27T15:15:27.077

0 Springs for tensioning V rollers? 2020-06-26T05:06:51.770

0 Converting / measuring bottle threads for creating an adapter to it 2020-08-07T08:15:38.650

-4 What are the basic requirements to make a 3d printing machine? 2017-07-11T16:28:43.033