Tag: makerbot

14 What causes bubbles in extruded filament? 2017-01-19T14:11:02.343

13 How to upload my works to Thingiverse without making my real name public 2016-02-11T01:41:53.370

11 Multi-color printing with desktop 3D printer? 2016-01-12T18:57:13.350

11 Layer delamination 2016-05-03T16:21:48.817

10 Are the Makerbot 5th generation's initial issues resolved 2016-02-18T02:52:21.660

9 MakerBot Replicator 1 Voltage Regulator Fix 2016-01-19T15:36:34.467

9 Troubleshooting filament slip on MakerBot 5 2016-12-20T15:28:07.903

8 Filament Guides Drag 2016-03-15T23:30:58.747

8 Are Makerbot Smart Extruder nozzles swappable? 2016-03-31T15:23:27.067

8 Irregular 3D printed part 2016-07-15T19:49:40.867

7 Why won't makerbot accept an STL file from Blender? 2016-02-24T20:10:54.190

7 Print sketchup files (STL) on makerbot 2016-03-08T18:52:33.760

7 Shifted Layers on Replicator 2 2016-11-02T16:52:59.423

7 What is the MakerBot Grip Surface lifespan? 2016-12-11T04:46:59.613

7 Infill pattern comparison 2017-02-21T08:21:29.327

6 Is it possible to use an aftermarket controller on a MakerBot? 2016-02-16T18:37:23.413

6 Makerbot Replicator 2 restarts after preheating the hbp 2016-10-09T05:01:43.607

6 MakerBot Camera Stream 2016-12-17T20:00:27.670

6 Printing coarse threads 2017-03-26T16:44:21.083

5 How thin can I make the wall of a pipe? 2016-01-13T21:23:20.463

5 Why does MakerBot Replicator heat the extruder and platform separately? 2016-03-08T19:21:15.733

5 How can I print gears using very high resolution material like nylon 2017-01-13T18:07:54.947

5 Bed design for magnetic easy release when printing PLA 2017-01-30T15:53:33.413

5 Insulate hotend on Makerbot Smart Extruder 2018-06-13T19:19:04.670

5 Makerbot Smart extruder+ heat block and nozzle question 2018-10-22T08:25:03.953

5 Replicator+ Motherboard Model 2019-03-06T20:35:26.030

5 How to fix transparent outer face? 2019-04-16T00:08:43.507

4 default axis steps per unit Makerbot replicator 2 2016-03-02T18:06:22.483

4 My MakerBot 2 jams after a couple hours of prints 2016-05-02T02:10:34.873

4 Using a MakerBot Replicator 1 dual (or clone like FlashForge Creator) with Cura 2017-06-21T06:21:13.097

4 Raft warping (Makerbot Replicator+) 2018-02-12T20:21:28.503

4 Can't control printer via USB 2019-06-24T19:23:53.813

3 Updating firmware on Monoprice Architect printer 2016-01-19T21:21:46.710

3 Settings to change when upgrading from Smart Extruder to Smart Extruder+ 2016-03-02T09:29:08.800

3 Makerbot Replicator 2 switches off and restarts automatically 2016-05-04T14:32:39.200

3 Dimensions off on final part 2017-01-06T19:24:53.300

3 MakerBot replicator 2x glitches 2017-03-07T08:15:34.147

3 Is it safe to print a rotor insert for a centrifuge using a makerbot? 2017-03-17T16:25:49.350

3 Replicator+ Experimental Extruder Filament Slipping Error 2018-07-23T03:32:06.820

3 Makerbot Replicator (5th generation) poor print quality 2018-12-22T14:54:24.457

3 MakerBot JSON-RPC Command List 2019-02-26T18:14:11.010

3 Makerbot Replicator 2X - restarts after heating 2019-10-13T16:46:04.653

2 What is the MightyBoard 1280 IO used for? 2016-02-19T05:42:02.453

2 How could I keep the material on the print plate from bending up on a makerbot 2? 2016-05-14T03:31:20.547

2 3D Printer Stringing after nth layer 2016-05-24T00:00:17.293

2 Replicator 2x getting too hot with silent stepper drivers 2019-03-21T08:01:50.997

1 Can K-type thermocouple disconnects be used with thermocouple based 3D printers? 2017-02-05T05:07:54.933

1 Why does MakerBot software shows holes in the wall of a 3d model? 2018-07-16T13:43:05.273

1 Makerbot Replicator 2 LCD screen not turning on 2019-07-11T21:56:43.277

1 Usable build volume of a Makerbot Replicator Plus? 2019-12-06T14:32:10.510

1 Reprogramming Makerbot Extruder Controller 3.6 with Arduino toolchain? 2019-12-06T16:44:25.270

1 Problems with noise, heat bed temperature and no X / Y endstop sensor on Makerbot Replicator 2X 2020-01-28T12:03:47.103

0 Makerbot Replicator 2 Halts during print 2017-01-03T19:32:29.657

0 Sailfish build dimensions not reflected in machine behaviour 2020-10-13T20:35:11.153