Tag: lulzbot

28 Why do the corners of my ABS object lift off the bed? 2016-01-12T20:40:43.047

11 Danger in 3D printing over a lithium ion battery 2018-04-24T18:25:08.703

8 ooze shield vs priming tower, do you need both? 2018-03-05T22:17:33.550

7 Is a dual extruder a reasonable choice for all-purpose printing 2018-02-04T03:42:27.450

6 Large flat ABS print curling during cooldown 2016-10-27T16:04:11.773

5 Marlin Minimum X/Y Feedrate 2018-06-28T03:02:58.660

4 Any family of plastics / filaments that bend and keep their shape? 2018-04-24T16:40:29.547

4 How to estimate the printing time of a 3D printer from an STL file? 2019-07-26T15:19:12.227

3 Entwined fiber-filled filament stops extruding after a few layers 2019-05-19T21:26:53.793

3 Is this articulated Turtle print failing because of over extrusion on a Taz Workhorse? 2019-08-23T06:05:17.517

2 Why do my prints have such a rough surface? (Taz Lulzbot Pro) 2019-08-09T18:16:01.157

2 OctoPrint Unable to Connect to Lulzbot Mini 2020-01-28T20:12:15.427

2 3D printer destroys part by lowering nozzle 2021-01-23T05:38:25.853

1 Problem With large prints on Lulzbot Taz6 2018-01-20T21:42:23.480

1 How far off-plane of a 4th-corner probe should be cause for concern during bed leveling? 2019-10-20T02:47:24.167

0 Lulzbot Taz Pro E2 Not Lowering Into Position 2019-07-18T15:48:48.733

0 Can I replace hotend on Lulzbot Mini 2 with upcoming E3D Hermes? 2019-11-09T16:46:13.840

0 Trying to remove autolevel from G-code - offset from bed not correct 2020-02-20T20:33:45.023

0 What tips are there for using 1.75 filament with a machine designed for 2.85 mm? 2020-12-21T03:24:56.900