Tag: infill

30 What are the advantages of gyroid infill? 2018-10-01T12:21:30.383

20 Different infill in the same part 2018-08-01T05:50:15.653

14 Choose infill percentage 2016-04-24T14:33:10.113

12 Slic3r - Can I add new infill patterns? 2016-03-14T22:55:19.037

10 slic3r: Can I vary the infill percentage for different heights of my model? 2018-09-29T23:42:49.567

8 Unidentified problem in printing 2016-12-12T20:57:16.917

7 How to add internal supports/localized infill, preferably in Cura? 2016-07-11T08:29:43.950

7 Infill pattern comparison 2017-02-21T08:21:29.327

7 Does Cura have an algorithm for any infill percentage or does it just have specific patterns? 2018-08-08T18:04:20.210

6 FEA in 3d printed solids 2017-11-14T16:16:49.117

6 Square and parallel infill patterns 2018-02-25T03:00:46.800

6 Infill is rough - how to enhance? 2019-02-11T21:34:42.023

6 Uniform squishy infill 2019-05-06T11:11:55.830

6 Do Cura's self-crossing infill patterns account for excess material from self-crossing? 2019-07-03T18:51:38.350

5 Thick wall or solid part of an otherwise medium-fill part 2016-12-24T03:13:41.090

5 How to slice this wing so it has a smooth infill like perimeters 2017-06-03T22:13:06.413

5 Infill failure when printing larger prints 2019-02-21T20:14:21.833

5 What is the best infill pattern for shearing strength? 2020-02-11T04:57:31.660

4 First layer - not even infill 2016-08-14T14:14:45.807

4 How do I repeat the layers of Slic3r for every 3 infill layers with different angles? (Might need some programming knowledge) 2017-03-16T03:06:33.303

4 Ultimaker Cura infill issues (weird vertical pillars due to underextrusion) 2017-06-28T22:04:49.930

4 Prusa i3 MK2 doesn't accept the printing material 2018-03-15T21:47:08.043

4 How are infill paths connect to form an efficient path that respect the object's geometry? 2018-09-05T03:25:42.310

4 What is this weird support line doing in this print? 2018-09-18T02:07:43.240

4 Infill failure at the far corner of two different prints 2018-09-18T19:44:50.687

4 Internal wall does not print in horizontal print orientation 2018-12-24T20:26:50.463

4 Slow down first layer above infill in Ultimaker Cura 2019-06-14T15:04:46.830

3 Using multiple infill types within one model 2018-09-29T12:04:41.693

3 underextrusion of infill? 2019-05-08T17:36:12.617

3 Infill keeps "shoveling", but perimeters are fine 2019-07-15T03:56:21.063

3 Ender-3 Pro - PLA mid-layer warping (layer separation) - salvageable? 2020-04-23T13:50:10.240

2 Will my Duplicator i3 be able to print this hole in the vertical wall without infill? 2017-02-02T20:05:22.480

2 Does anyone know how Slic3r determines its infill adjacent strand spacing, instead of using fill density? 2017-05-20T11:55:22.813

2 Gap between infill and walls for one filament only 2019-01-12T12:51:04.407

2 Best infill for inter-layer adhesion 2019-05-26T15:53:27.013

2 How to slice a model to ensure at least a certain amount of filament per layer? 2020-01-06T09:33:33.947

2 Weird solid infill for chamfer 2020-04-07T21:34:39.123

1 Why does infill percentage stop the print from sticking to the bed? 2018-11-29T16:08:20.250

1 Issues with print Prusa i3 infill breaking and causing clogs 2020-04-10T04:04:38.050

1 Delamination issue Ender 3 Pro PLA 2020-07-01T17:55:55.550

0 Infill not printing well. What I am doing wrong? 2020-05-04T13:26:50.130

0 Problem with grid infill (line positioning) 2020-09-14T10:28:16.200

0 Custom Infill Pattern Based on Self-Generated Geometry 2020-10-07T23:30:03.523

0 Cura 4.8.0 Custom Infill using Shape Overlap Modifier not working 2020-12-06T18:07:16.243