Tag: g-code

22 Is there a G-code for waiting? 2016-02-07T21:23:27.297

13 Why do some models appear broken in slicing software? 2016-01-13T14:12:59.173

12 What is the purpose of asterix (*) in Gcode? 2016-12-01T20:38:41.543

10 Calculating the estimated print time of an already sliced file 2016-12-20T14:20:13.200

10 Cura: set z-offset 2017-10-16T14:39:31.857

9 How do the E commands in G-code work, exactly? 2016-11-08T22:00:24.473

9 Turning off heatbed for the last few layers. Good idea or not? 2017-02-11T04:25:59.960

9 Folgertech FT-5 : Does not seem to be reading G-Code correctly 2017-02-21T18:10:28.567

9 What is G92 used for in G-code 2017-10-29T01:55:39.243

9 Platform support up to a certain Z height in Ultimaker Cura/G-code 2018-04-02T21:02:54.000

9 Are parentheses allowed within a G-code comment? 2018-07-16T19:07:06.840

8 How do I set the G-code buffer size on Marlin? 2016-01-13T23:34:03.707

8 Convert G-code to SVG 2016-03-21T04:49:04.347

8 Extruder motor does not turn 2018-03-08T14:13:23.063

8 Run custom code between g-code commands? 2018-04-13T05:11:06.943

8 What is wrong with my "disable sensor" gcode? 2018-05-15T10:53:34.563

8 What is a printer console/terminal? 2019-07-13T14:49:41.060

7 E axis vs Z axis 2018-02-09T10:44:18.653

7 Music from the printer? 2018-03-21T14:30:39.123

7 Writing G-code : swiping at start of print 2018-07-10T09:38:45.590

7 What is the "Detailed format classification" of the ISO 6983 (G-Code spec) 2018-08-11T15:43:00.390

7 Help with a Tool Change Script 2018-10-03T15:00:06.977

7 laser is engraving the negative space 2019-05-24T01:30:45.453

7 How to pause a print to insert something in a cavity using Ultimaker Cura? 2019-07-14T11:06:39.267

6 Which algorithm does Marlin use to create arcs? 2016-04-01T23:18:49.420

6 Printer randomly moves to home during printing, then resumes as normal 2016-04-10T10:31:22.693

6 Editing arc in Marlin for 3d printing 2016-10-17T20:24:48.030

6 Nozzle heats while autoleveling (or before) 2018-05-13T15:20:46.027

6 Why did my printer's nozzle dig itself into my print? 2019-02-02T22:09:25.580

6 Add a laser module to Reprap Guru Prusa i3 2019-05-17T20:19:47.090

5 No extrusion when trying to resume failed print with manually edited gcode 2016-03-22T15:07:20.670

5 Where to find z coordinate in G-code for delta printer 2017-02-13T14:23:53.913

5 What does Marlin's G30 code do? 2017-05-08T20:42:26.763

5 How do I modify Cura's code generation? 2017-07-25T02:53:01.673

5 G04 dwell period control parameters 2017-10-29T17:12:28.837

5 Extra data appended to the Y values when issuing `M92` & `M500` 2018-02-06T19:34:20.393

5 How do you program a 3D printer? 2018-04-25T18:16:37.863

5 Problem with 3D printer not accepting new print gcodes 2018-05-25T00:23:27.163

5 Multiple unattended prints using extruder to sweep build plate? 2018-07-12T08:55:15.740

5 Is G-code read line by line? 2018-11-14T15:40:07.400

5 Move print bed to front at the end of a print rather than the back 2019-02-06T18:45:53.690

5 What does a stand alone "T" index value do? 2019-03-12T20:19:13.720

5 G-Code for resetting to 100% speed 2019-04-15T20:11:55.320

5 How to post-process G-code to make prints faster using splines and arcs? 2019-07-10T04:48:36.217

5 Help with my G-Code to change filament change mid-print 2019-08-23T01:25:33.150

5 Writing G-code: Audible Alert at end of print 2019-09-21T07:49:01.270

5 What is the difference between M420 S and M420 S1? 2019-12-24T08:15:56.250

5 Simultaneous heating of extruder and bed at start of print 2020-03-15T18:50:56.100

4 Marlin - slowing down print speed 2016-11-01T03:37:01.813

4 gcode to move the printhead up for maintenance 2017-01-18T05:40:20.393

4 Using a MakerBot Replicator 1 dual (or clone like FlashForge Creator) with Cura 2017-06-21T06:21:13.097

4 Centering model with CuraEngine when creating g-code? 2017-10-25T06:50:39.283

4 Using KISSlicer from command line on Linux? 2017-12-17T09:28:33.640

4 Selecting G-code files from SD with serial 2017-12-25T19:32:20.323

4 Weird underextrusion in vase mode? 2018-03-26T03:12:24.313

4 Apply X-offset to gcode (re-slicing not possible) 2018-04-07T17:56:22.463

4 Software for 3d model to arc/curve gcode? 2018-04-17T23:01:46.637

4 How to sort G-code on SD card based on material (ABS|PLA|SBS)? 2018-06-04T07:42:42.550

4 Laser Engraver with Smoothie, RAMPS 1.4 or AWC708C? 2018-06-23T14:41:38.567

4 Can G-code scripts be run automatically on inserting an SD card when using Marlin Firmware? 2018-08-29T16:45:04.900

4 Can a single line of Gcode have variable extrusion rate? 2019-02-12T12:03:05.070

4 Extruder retracts filament while moving from default start line to actual object location 2019-03-01T20:32:51.040

4 Standby hotend and bed heating with inactivity timer after print? 2019-07-06T01:55:50.227

4 Cura 4.3.0 does not pause on Renkforce RF100 V2.2 2019-10-24T17:48:52.240

4 Converting an undirected graph to optimal G-code paths 2020-02-05T16:37:30.527

4 How to resume an unfinished project 2020-05-19T11:14:17.087

4 G-code for activating material preset in Marlin 2020-08-24T20:24:32.377

3 Tinkerine 3D Printer 2016-06-20T20:13:11.347

3 G-code (M-code?) for Get Bed Temperature 2017-02-27T23:49:41.503

3 What G-code commands tell the printer to change nozzle on a dual extruder printer? 2017-03-08T04:06:17.447

3 Monoprice Maker Ultimate Extrudes Too Much Filament At Start 2017-05-24T04:29:47.617

3 How do I get my Wanhao Duplicator 6 / Maker Ultimate to lower bed at end of print? 2017-05-24T16:37:21.587

3 single point z-correction after 3-point auto-leveling 2017-08-21T09:43:04.600

3 Adding support when generating g-code from Cura Engine (command line)? 2017-10-17T07:21:56.447

3 How to express dwell time in G-code 2017-10-29T01:00:22.167

3 Sending G-code commands to Hyrel System 30M using python 2018-01-24T21:26:24.960

3 Any code to move up Z axis after finishing the printing? 2018-02-21T23:02:18.833

3 How to execute firmware command from gcode 2018-05-06T15:25:28.050

3 Large 3D printer 10'x10'x4' - Need G-code to tell when it stops extruding and to stop machine 2018-05-08T18:08:12.410

3 Linking the 3D printing path coordinates to CAD for modelling 2018-06-24T11:40:27.047

3 Using two feeders at the same time 2018-09-07T15:08:10.993

3 Marlin: Making any GPIO pin HIGH for a given time 2019-01-15T12:36:46.673

3 Anet A8 ignores extruder temperature? 2019-02-12T13:52:20.063

3 Simplify3D with error in preview? 2019-04-18T23:55:04.333

3 Saving BL Touch settings 2019-12-21T04:12:04.200

3 Slicers and printers compatibility 2021-01-01T15:22:28.337

3 Ender 5 hotend and bed cooling down while auto bed leveling 2021-01-26T15:09:15.483

2 Unable to load G-code in Ultimaker Cura 2016-12-12T19:05:54.683

2 Resetting the zero position of the X axis on a RepRapPro Mendel Mono 2017-03-23T10:47:35.790

2 Is there a G-code to get power supply state? 2017-05-09T14:06:03.460

2 gcode commands in octoprint: Z moves ignored? 2017-10-14T10:44:39.993

2 Why Cura flattens first layer of round objects? 2017-10-25T09:45:31.790

2 What is the best free source for generating g-code 2017-10-26T01:27:47.787

2 Is Marlin capable to work with binary G-code? 2017-11-08T05:26:57.463

2 SerialException: 'WriteFile failed ([Error 22]...' Printrbot Simple Metal using Cura 15.04.6 2018-01-12T00:56:30.123

2 Issues with direct g-code transmission via serial port 2018-02-02T19:45:53.627

2 G4 S20 vs. G4 P2000 2018-11-16T10:26:06.903

2 What defines the speed at which a motor is retracting and how can it be changed? 2018-11-17T18:09:04.323

2 How to change temperature every 25 layers (or 5 mm) in Ultimaker Cura or G-code? 2019-01-15T03:24:32.830