Tag: extrusion

19 What are the reasons for my 3D prints having large numbers of strings between parts of a layer? 2016-01-12T20:16:01.823

18 How do I keep my extruder head from getting clogged? 2016-01-13T20:50:38.520

18 Filament extrudes at an angle 2016-01-24T12:34:09.723

12 Isn't using the Extrusion Multiplier like cheating? 2019-03-01T13:56:00.977

11 Under extrusion towards the end of the print 2018-01-10T01:29:52.727

11 First 3 mm prints poorly, then fine after that 2019-01-20T20:07:06.073

10 Holes/ missing layers (after retraction) in 3d printed objects 2016-01-17T13:27:51.030

9 How thin can my extrusion be from a 1.2mm extruder? 2016-02-05T23:53:48.623

9 Which type of extrusion problem? 2016-10-28T15:08:18.357

9 Slicer line width vs. extrusion multiplier for layer adhesion? 2018-09-21T11:28:37.490

8 How to connect filament end-to-end? 2016-06-15T19:42:29.800

8 Unidentified problem in printing 2016-12-12T20:57:16.917

8 Constant under extrusion and filament grinding 2018-08-27T13:17:40.447

8 Extruder doesn't retract on inner wall lines thereby causing stringing 2018-12-17T18:35:33.537

7 Extrusion adjustment 2016-05-13T13:12:06.020

7 I am experiencing some severe under extrusion 2016-10-19T09:02:57.463

7 What causes these round corners 2017-01-01T22:41:58.273

7 Weight Reducing Design Change for Extruder Driver 2017-04-11T10:05:07.007

7 Hot end jamming very quickly 2017-11-09T17:33:13.327

7 Tuning line width and flow compensation in Cura 2018-02-18T10:59:29.483

7 Anet A8 bad/inconsistent extrusion after changing nozzle 2018-05-02T19:06:06.223

7 Extruding a (wall?) in Fusion 360? 2018-05-24T14:51:36.160

7 Extruder feedrate when loading and unloading filament 2018-09-01T04:44:53.307

7 Handling retraction when using a mixing extruder (2 in 1 out) 2019-04-10T15:01:21.300

6 Slic3r under extrusion 2016-05-22T21:08:56.350

6 Filament not extruding 2017-11-07T17:12:26.207

6 Why is my 3D printer over extruding when I have set the flow rate very low 2017-12-18T19:54:47.410

6 Finding a shredder for my failed prints 2018-05-12T15:42:21.310

6 Would a really short melt-zone be beneficial 2018-06-07T07:27:17.280

6 Problems with Z step 2018-08-11T12:10:56.980

6 Adding additional extrusion to a raft (raft with a skirt?) 2018-11-08T13:41:13.097

6 Print came out like a wafer 2019-04-30T02:57:45.477

5 My printer is printing a messy ball. CTC prusa from Ebay 2018-01-06T19:01:30.123

5 Filament starts extruding as soon as hotend reaches melting point 2018-02-06T13:48:19.880

5 Regular over-extrusion..? 2018-02-14T18:34:08.173

5 What setting is this defect caused by? 2018-03-17T19:43:35.993

5 Temperature offset on Wanhao Duplicator i3 Mini 2018-03-24T12:45:34.063

5 Strange grooves with ABS 2018-06-01T17:53:13.627

5 Underextrusion after travel moves with PETG/Colorfab XT 2018-07-07T08:49:43.057

5 How can you calibrate extrusion multiplier value in Slic3r WITHOUT changing printer settings in memory? 2018-08-21T08:19:49.693

5 Unknown issue affecting print quality 2018-09-12T22:55:02.340

5 PETG filament doesn't stick reliably to fake Buildtak surface 2018-10-06T05:27:46.417

5 Print Lines Aren't Joining Together 2018-11-29T23:39:32.877

5 Slicer software capable of working with large filaments 2019-03-08T06:23:17.393

5 Ender 3 Extruder First Layer Perfect But Then Starts Clicking Afterwards 2020-02-06T07:07:32.430

4 Failing slow extrusion after upgrade to E3D hotend 2016-05-30T21:58:12.077

4 true color printing with CMYK+White (not 3-in-1 diamond head RGB) 2016-10-17T06:18:24.220

4 E3D V6 underextruding always? 2017-05-28T12:15:14.220

4 Correct amount of force on piece of paper when leveling bed 2017-09-06T08:25:23.983

4 How is the E argument calculated for a given G1 command? 2018-07-05T17:35:22.243

4 Given a viscosity is it possible to calculate required pressure for desired output? 2018-09-06T19:54:28.283

4 Massive over extrusion after changing firmware 2018-10-06T11:39:31.243

4 Under extrusion, looking for specific information 2018-10-09T16:50:52.423

4 Hemispherical Bowl : how is it possible? 2018-10-16T05:24:58.090

4 Ender 3 extrudes plastic whilst at standstill, and while moving to start of print 2018-11-24T22:55:41.020

4 Can a single line of Gcode have variable extrusion rate? 2019-02-12T12:03:05.070

4 Extruder retracts filament while moving from default start line to actual object location 2019-03-01T20:32:51.040

4 How is E value calculated in Slic3r? 2019-06-04T04:22:43.570

4 Ender 3 Pro Filament extrusion problems 2019-09-03T20:25:38.783

3 Flow Settings in Cura 2.4 for Ultimaker 2+ not available (suspected overextrusion filling small holes) 2017-04-04T10:02:51.553

3 Monoprice Maker Ultimate Extrudes Too Much Filament At Start 2017-05-24T04:29:47.617

3 Effect of particulates on the viscosity of paste that is used to transport it in extrusion printing 2017-07-07T10:20:29.270

3 How to concave a cylinder with Onshape? 2017-11-09T12:59:46.333

3 Anet A2 3D printer suddenly will not home X and Y 2018-07-06T06:07:24.030

3 Stuttering extrusion after layer change 2018-11-24T18:27:50.540

3 Different lengths of filament is extruded with different temperatures 2018-11-29T04:33:33.650

3 When I attempt to calibrate extruder steps the increased values don't correspond to physical increases 2018-12-13T20:59:38.797

3 Small structures are deformed after switching to Duet Wifi 2019-01-12T21:16:44.563

3 Use Gcode Extrusion Speed in Calculations 2019-02-08T21:15:36.847

3 Monoprice Maker Select v2 stops extruding after about 200-300 mm 2019-02-12T17:57:02.127

3 Can't seem to fix over extrusion 2019-05-27T17:37:59.347

3 Retraction Jamming Problem! 2019-07-13T16:53:17.173

3 Why is my 3D printer not extruding properly? 2019-07-19T15:07:26.323

3 Prusa i3 MK3S keeps clogging during print. Ugly streaks sometimes, and complete clog when printing with lower layer lines 2019-11-13T19:43:55.203

3 Wavy lines on 1st layer only 2020-01-05T03:28:35.993

3 Ender 5 Pro print quality issue 2020-04-04T15:18:31.433

2 Ultimaker Original+: print has lumps and small gaps are being filled 2018-01-15T21:59:36.437

2 Cooling time query ABS 2018-02-02T13:10:08.097

2 Filament Leaking During Automatic Bed Leveling 2018-12-21T14:43:50.243

2 Weird surface thing 2018-12-21T15:52:56.323

2 Material extruded to prime the nozzle doesn't stick to bed at first 2018-12-21T16:06:18.033

2 Extruder calibrated, but prints still oversized by .1 mm or so 2019-02-15T19:46:28.433

2 Is there any (relatively simple) way to determine whether a stepper is being directed to move by the voltage signal across its winding? 2019-04-06T03:01:29.817

2 How is the Ex.xxx calculated? 2019-04-25T04:04:33.897

2 No extrusion, but manual extrusion works 2019-05-21T13:26:03.870

2 Printing with PETG, printer says it's out of filament when it clearly is not 2019-07-08T21:32:38.357

2 Gaps between perimeter walls; potential under extrusion? 2020-08-03T10:21:58.633

2 e-steps are wrong only during printing moves 2021-01-06T18:58:40.763

2 Understanding all the ways to avoid heat creep 2021-02-12T14:40:17.830

1 Which hotend does not clog and is good to use with a Bowden 1.75 mm setup? 2016-03-01T20:19:30.800

1 3D printer extruding too thick 2017-02-02T17:14:01.587

1 How to fix bad extrusion on my printer 2017-05-31T03:43:50.787

1 Stuck getting ANet A8 Printer to build layers 2018-05-07T09:49:16.743

1 Is my printer over extruding? 2018-11-08T23:41:46.500

1 Filament gets coiled inside the extruder 2018-12-07T13:02:39.453

1 Periodical under extrusion with Slic3r 2019-01-24T12:40:37.363

1 Strange banding on first layer/skin 2019-05-11T18:10:32.357

1 Watts of filament extrusion 2019-06-04T10:17:23.857

1 How to calculate the extruder gear ratio given a desired max printing speed filament diameter and nozzle diameter? 2019-09-04T12:19:37.040