Tag: extruder

39 When to use 1.75 mm vs 3 mm filament? 2016-01-15T07:04:09.510

28 Why do the corners of my ABS object lift off the bed? 2016-01-12T20:40:43.047

24 How should I clean my extruder when changing materials? 2016-01-14T00:23:36.260

22 How to get consistent and accurate readings from thermocouples? 2016-01-13T18:02:27.633

21 What are the advantages and disadvantages of an all-metal hot end compared to one with a PTFE heat break? 2016-08-09T15:33:03.320

18 How do I keep my extruder head from getting clogged? 2016-01-13T20:50:38.520

18 Filament extrudes at an angle 2016-01-24T12:34:09.723

16 Can 1.75 mm filament be used in a printer that takes 3 mm filament? 2016-01-15T13:05:05.660

14 Efficient and easy way to thermally insulate the heat block of the hotend? 2016-06-01T08:56:51.677

13 Will I see a noticeable difference switching from a .4mm to a .3mm nozzle? 2016-02-05T22:18:16.727

13 Which is the difference between MK6 and MK8 and even MK10? 2018-02-08T06:55:21.307

12 Extruder clicks 2016-12-13T10:36:31.993

11 How to choose an extrusion temperature? 2016-06-02T15:05:32.857

11 Pulling filament through long tubes 2016-06-13T07:07:27.443

11 Extruder stepper motor problem, what can be wrong? 2016-12-04T00:02:37.340

10 Are the Makerbot 5th generation's initial issues resolved 2016-02-18T02:52:21.660

10 Why does my PLA filament form a spiral shape and clog my extruder? 2016-05-03T18:08:00.367

9 M3D filament not extruding well (anymore) 2016-06-12T01:30:25.640

9 How can I prevent my nozzle catching on my print? 2017-11-28T18:09:44.930

9 Filament isn't going into the Bowden tube, instead it goes "into the room" 2018-09-14T17:06:07.100

8 Teflon tubing in nozzle throat coming out? 2016-03-31T07:14:05.890

8 How to connect filament end-to-end? 2016-06-15T19:42:29.800

8 Extruder is running backwards? 2016-06-17T07:13:19.360

8 What is this called and where can I buy a replacement? 2017-11-14T05:16:41.043

8 Extruder motor does not turn 2018-03-08T14:13:23.063

8 Auger Paste extruder 2018-05-02T15:59:01.423

8 How do I calibrate the extruder of my printer? 2018-07-27T12:18:53.717

8 Geeetech Prusa i3 Extruder seems to push more filament, gear slips/skips? 2018-10-10T23:03:56.923

7 Loss of extrusion in Stratasys FDM liquefier 2016-09-01T01:44:51.297

7 Silver Solder specifications for hot end heating element 2017-01-09T16:25:36.013

7 Weight Reducing Design Change for Extruder Driver 2017-04-11T10:05:07.007

7 Filament not feeding then eventually blocked 2017-08-04T06:41:29.940

7 Nozzle always "randomly" moves to 0 during print, then resumes 2017-12-02T19:39:42.413

7 Anet A8 reading 739°C from the extruder thermistor! 2017-12-10T15:04:39.263

7 How can I get PLA or PETG to stick to a glass bed permanently without adhesives? 2018-01-13T19:38:05.523

7 Filament being pushed back out the filament hole 2018-04-14T01:52:18.217

7 Zonestar Extruder motor does not work - what can I check? 2018-05-04T09:36:39.083

7 Extruder Clicking without Extrusion Problems 2018-07-21T15:58:23.627

7 Why does my part-cooling fan cause stringing? 2018-09-10T22:44:53.173

7 PTFE pulled into extruder gears 2018-10-24T08:07:14.670

6 What are the appropriate ranges of gear ratios for 1.75 mm and 3 mm filament extruders? 2016-03-08T19:54:06.207

6 What kind of silicone glue should I use to attach my thermsistors? 2016-03-20T00:06:31.977

6 Good methods to clean extruder gear (hobbed) from filament pieces? 2016-06-17T21:47:42.837

6 Access Temperature sensor data of 3D printer via Serial connection 2016-07-24T21:40:34.267

6 What grade of wire is required for the heating element on a J-Head extruder? 2016-12-01T14:50:28.943

6 Calculating extruder motor steps for 1 mm 2017-01-07T21:09:20.083

6 Print Nozzle Dragging and Smearing Filament while Printing 2017-10-17T19:58:04.243

6 If I have a nozzle clog, can I easily get rid of it by simply replacing the nozzle? 2017-12-30T22:28:28.170

6 Anet A8 extruder motor moves back and forth 2018-01-25T04:12:41.133

6 3d printer drip problem 2018-02-18T19:08:54.457

6 Extruder clogs with HIPS 2018-05-30T20:44:25.467

6 StoneFlower3D - how to pause a print? 2018-06-13T09:32:15.183

6 Hotend heating failure too short before limit 2018-09-03T16:13:37.507

6 Retraction Causing Skipping 2018-12-17T13:11:56.090

6 Can an extruder rated for 24 V work with 12 V ATX power supply? 2019-02-04T22:11:56.383

6 Installing bowden tube into E3D V6 2019-02-28T19:08:22.303

6 How does slipping Bowden tube affect retraction or does it at all? 2019-10-21T16:41:55.947

5 Repeatedly Clogged Printrbot Simple Extruder 2016-02-20T19:31:45.003

5 How to compensate for bad quality filament? 2016-03-30T16:45:29.260

5 What is causing these artifacts when the extruder moves in one direction? 2016-05-09T02:30:57.717

5 First Layer problems? 2016-06-29T04:43:36.577

5 German RepRap NEO only heats to 130°C 2016-08-13T08:54:59.700

5 3D printers for ceramic clay? 2016-12-13T10:33:24.760

5 Extruder skipping/clicking (brand new printer) 2017-01-14T21:42:08.230

5 How to unclog a clogged extruder? 2017-01-29T14:39:53.090

5 My extruder does not reach the set temperature 2018-02-03T22:46:58.343

5 MK8 extruder showing 500+ °C on temperature sensor? 2018-03-18T21:41:31.840

5 Extruder clicking Tronxy x5s 2018-03-24T18:32:22.860

5 How to change E0 to E1 on Marlin 1.1? 2018-04-19T15:13:05.347

5 Monoprice i3 clone heat shuts off printing abs 2018-04-23T18:33:31.267

5 How to heat up a Printrbot's hotend using an SD card 2018-05-06T14:30:03.967

5 I want to use my 2 extruders simultaneously 2018-05-26T05:45:59.923

5 Creality Ender 4 extruder problem 2018-06-11T20:33:48.250

5 Insulate hotend on Makerbot Smart Extruder 2018-06-13T19:19:04.670

5 Adhesion problem (heat bed or extruder issue) 2018-06-14T22:04:54.027

5 Sudden underextrusion on Ender3 2018-09-02T09:07:26.637

5 Compensating for smaller extruder gear 2018-10-10T16:09:05.737

5 Apparently systematic nozzle clogging 2018-10-10T22:05:24.947

5 Extruder drive cog slipping on filament 2018-10-16T06:26:43.323

5 Makerbot Smart extruder+ heat block and nozzle question 2018-10-22T08:25:03.953

5 What parts are suitable replacements for an Ender 3 Pro? 2018-11-06T00:34:34.183

5 How can I avoid jamming in the feeder? 2019-02-02T00:10:43.937

5 Printer is Confused-Printing in Air Literally 2019-03-21T03:38:17.487

5 What makes an extruder right handed? 2019-05-13T15:15:41.143

5 Ender 3 Extruder First Layer Perfect But Then Starts Clicking Afterwards 2020-02-06T07:07:32.430

4 Stainless tip for thermistor 2016-03-07T08:08:59.980

4 How to build the extruder motor holder for the Kossel Mini 2016-03-13T18:11:03.847

4 Prusa XI3 Extruder Calibration 2016-03-26T15:27:18.303

4 Would appreciate advice on unclogging hot end [Makerbot Replicator v2] 2016-04-24T10:03:29.390

4 Failing slow extrusion after upgrade to E3D hotend 2016-05-30T21:58:12.077

4 Retainer for PTFE in throat 2016-12-30T23:47:10.123

4 Delta 3D printer extruder? 2017-04-04T16:42:23.250

4 E3D V6 underextruding always? 2017-05-28T12:15:14.220

4 Ramps 1.4 1.8 stepper motor extrusion calculation 2017-07-25T19:00:08.187

4 prusa i3 not extruding enough plastic 2017-09-05T05:39:28.723

4 Extruder keeps jamming because of filament dust! 2017-09-11T09:18:46.893

4 Tevo Tarantula I3 filament clogging up 2017-09-14T10:01:49.140

4 Tevo Tarantula extruder motor clinking sounds 2017-09-14T11:07:47.853

4 How to print TPU material with 3D printer 2017-09-27T06:20:41.193