Tag: diy-3d-printer

14 What are the pros and cons of collecting parts yourself, versus getting a DIY kit and then modifying it? 2016-01-27T14:26:50.577

12 Would 3D printing multiple copies at once saves time? 2017-02-27T23:39:34.063

10 Are there practical reasons to NOT use a stepper motor with lead screw for the X and or Y axes? 2019-05-29T21:13:49.873

9 Nozzle rubs on previous layers 2017-10-03T04:11:02.003

9 How can I prevent my nozzle catching on my print? 2017-11-28T18:09:44.930

9 3D printer stepper motors only going one direction and skipping in the other 2017-12-22T22:12:51.127

9 Heat bed troubles 2018-02-07T08:03:25.533

9 Printing with colorfabb XT fails after several successful layers 2018-07-11T20:34:13.913

7 How to offset my probe so it's not hanging off the bed at 0, 0 position when printing 2016-11-07T20:37:56.777

7 ABS or PLA for structural printed parts? 2017-04-30T13:12:33.240

7 Would using a leadscrew with 1 or 2 mm lead, en lieu of 8 mm, result in a better printer? 2017-05-10T09:31:33.463

7 Can cheap hotend parts sourced from China actually produce good prints? 2017-06-10T01:56:58.333

7 Managing LEDs with NanoDLP 2017-09-22T12:22:40.770

7 Hot end jamming very quickly 2017-11-09T17:33:13.327

7 RAMPS 1.4, 1.5 or 1.6? 2018-03-12T14:52:47.610

7 Issues with Auto Bed Leveling 2018-10-01T06:28:20.407

6 HDPE as the body of a 3-D Printer? 2016-06-03T17:56:37.480

6 Commercially available 3D printer fume and UFP extractor 2017-03-19T14:24:01.617

6 What is the meaning of extruder's knocking sound? 2017-11-14T10:25:01.993

6 What else can I use for a 3D Printer frame? 2017-12-11T16:15:24.397

6 Why is my 3D printer over extruding when I have set the flow rate very low 2017-12-18T19:54:47.410

6 Lead screws - M8 instead of M5? 2018-03-05T12:49:58.393

6 At which point does a delta 3d printer change the G-code in order to work in its non-cartesian design? 2018-04-03T18:48:05.973

6 Which is a more accurate linear motion system? 2018-09-14T12:25:02.543

6 First time assemble of Anet A6 printer. Only fan works 2018-12-01T17:54:11.863

6 How to make physical buttons send G-code? 2018-12-20T05:00:59.027

5 print quality: z wobble issue 2017-07-02T14:39:53.450

5 MOSFET problems! 2017-10-03T15:26:56.933

5 G04 dwell period control parameters 2017-10-29T17:12:28.837

5 3d print lean in Y-axis 2017-11-03T21:51:33.737

5 Missing print steps in e-waste 3d printer 2017-11-09T16:38:14.603

5 Linking an Arduino Mega with RAMPS and an Arduino Uno with CNC Shield to control more stepper motors using Marlin firmware 2018-05-08T08:48:12.413

5 Do all 3D printers allow the printing of flexible material? 2018-08-27T21:02:10.920

5 Why do 3D printers have only one limit switch? 2019-05-08T14:48:36.270

5 Setting Junction Deviation in firmware has no effect 2019-10-29T20:55:07.047

5 Thermal runaway on extruder hotend 2019-11-09T09:46:46.843

5 Why aren't fixed build platform 3D printers popular? 2020-10-29T07:16:15.560

4 How to properly read dimensions for a 3D printer? 2016-09-25T15:06:21.483

4 Hictop prusa I3 clone - broken z axis right bracket bearing 2016-10-03T05:21:07.127

4 3D printer test troubles (M999 error, motors do not move) 2017-03-09T20:04:52.797

4 Pronterface won't connect to my Anycubic Kossel Linear Plus 2017-05-01T13:36:59.920

4 Is it a good idea to include thermal fuses in a DIY 3D printer design? 2017-05-17T05:54:56.123

4 Complete list of fasteners for the Sintron Kossel 2017-05-31T18:49:09.567

4 Which choices do we have on Daylight Resins? 2017-07-28T09:23:58.777

4 Z axis Stepper motors not working correctly 2018-01-20T06:40:23.790

4 Dual PSU with one switch fuse 2018-05-07T05:42:15.197

4 3D printer filament will not load after running the printer out of filament 2018-06-04T17:12:49.220

4 Arduino WEMOS and RAMPS 2018-07-07T09:31:29.617

4 How to calculate linear Y rod length for a larger replacement bed? 2018-07-12T21:17:30.247

4 Stepper motors are not working when connected with RAMPS 1.4 2018-08-27T05:08:44.890

4 Dual extruder clogging problem 2018-10-12T11:44:48.550

4 3D printer out of normal printer (HP PSC 1315) 2018-11-28T21:08:53.260

4 Connecting OLED 128x64 LCD; dogm_lcd_implementation.h is missing for patching 2019-02-14T00:27:50.967

4 After some time stepper motor is hot 2019-03-17T02:26:19.157

4 Can I repurpose most of the components of this Prusa clone for a Delta? 2019-05-03T16:20:34.980

4 Weird lines and smaller height 2019-05-28T22:57:56.980

4 Extruder problem 2019-07-04T11:55:14.033

4 My DIY printer only boots when all my endstops are triggered. Why is that? 2019-10-20T18:43:55.220

3 Easiest way to build a horizontal hotend mount at home, without printing 2016-03-18T10:21:36.583

3 How can I program a 3D printer to move using Arduino? 2016-06-26T07:46:37.750

3 For a larger build volume, what lengths of 2020 aluminium do I need? 2017-04-28T18:30:24.857

3 3d printer not printing circles correctly 2017-09-13T15:08:12.017

3 Which firmware to use on printer settings for DIY printer 2017-10-28T00:46:40.167

3 Which proximity sensor to use? 2018-03-21T11:40:05.433

3 DQ542MA Driver proper settings for NEMA 17 Stepper Motor 2018-06-21T06:21:39.647

3 DQ542MA Blown Fuse 2018-06-25T22:28:44.347

3 How do you calibrate a delta robot 3D printer? 2018-08-31T17:52:14.807

3 Hot end considerations for 300+ °C and greater than 1 mm nozzle size for polycarbonate 2018-09-02T03:58:35.590

3 Ball screw: Maintaining Z axis position when motor is OFF 2018-09-19T05:39:05.147

3 Anet A8 prints not good 2018-09-30T10:30:51.530

3 Pronterface won't connect to Printrbot Simple metal with error message 2018-12-23T17:57:41.440

3 Homing the 3D printer 2019-02-11T12:07:57.223

3 Can I replace a damaged firmware of a 3D printer based on Arduino Mega? 2019-04-25T20:32:56.457

3 Retraction Jamming Problem! 2019-07-13T16:53:17.173

3 Using both .gcode and .gbr files in a hybrid 3D printer + circuit etching machine? (RepRap 1.4 with Marlin firmware) 2019-07-16T06:45:47.640

3 Anet A8 not printing over heat bed 2019-10-01T12:53:06.243

3 CoreXY Carriage moves on the Y when moving the X 2019-10-25T15:44:26.073

3 Help needed to design 3D printer part 2019-12-17T22:07:17.777

2 Chinese replicas of the E3D titan extruder 2016-08-29T07:57:33.620

2 Continuing a failed print when you have Auto Mesh Bed Leveling 2017-05-10T09:57:08.057

2 3D printing bed size and selecting models 2017-06-24T17:49:55.637

2 Anet A8 frame replacement 2017-07-02T20:18:50.810

2 What's the advantage to deploy 3D printing on IaaS 2017-07-11T19:10:49.157

2 Creality 3D Ender-4, a "extruder kit" does not fit the frame 2017-07-27T18:52:11.410

2 ROKO bed levelling sensor 2017-10-06T19:01:38.640

2 What is the best free source for generating g-code 2017-10-26T01:27:47.787

2 Extruder motor not functioning after G29 command 2017-10-29T08:30:37.947

2 Powder 3D Printer 2017-12-15T22:08:48.253

2 Pronterface window question 2018-01-17T12:35:07.907

2 Robotdigg linear guide not smooth motion 2018-04-21T12:31:20.670

2 Adding a battery backup power supply 2018-08-23T02:06:23.387

2 Geeetech Prusa I3 Pro W. Cannot update firmware 2018-12-12T14:01:18.640

2 How does a 3D printer software/firmware work 2019-01-11T01:35:02.860

2 Bed leveling compensation not working! 2019-01-12T11:23:17.693

2 Path of a nozzle crosses over itself 2019-02-17T19:00:18.093

2 Premium heated bed upgrade options? 2019-03-05T18:02:36.683

2 Steppers don't work as expected while printing 2019-03-05T20:06:50.780

2 Extruder Motor Not working during Printing 2019-03-09T13:58:39.730

2 How to decrease sensitivity to heat-bed temperature? 2019-05-07T10:34:34.253