Tag: delta

11 Under extrusion towards the end of the print 2018-01-10T01:29:52.727

9 Delta printer distortion 2017-09-18T17:57:17.290

8 How are delta movements calculated? 2016-02-23T18:14:24.317

8 Delta Printer: Slighty incorrect print alignment on the build plate 2018-10-29T19:55:17.520

7 Kossel accumulates error along Z axis 2016-08-29T20:08:00.503

7 Delta printer misalignment at first few layers 2018-01-16T14:39:45.943

7 How to change the voltage on a FLSUN QQ 2018-04-24T05:03:01.530

6 Distortion calibration on XY plane in Repetier 2016-07-07T15:35:27.710

6 Clean or wipe move for delta 3D printers 2016-08-06T23:15:36.037

6 At which point does a delta 3d printer change the G-code in order to work in its non-cartesian design? 2018-04-03T18:48:05.973

6 Getting bumps/warts on surface, Cura doesn't want to comb? 2018-05-15T02:36:57.383

5 Where to find z coordinate in G-code for delta printer 2017-02-13T14:23:53.913

5 Scaling/size issues in delta printers 2017-05-03T14:23:30.573

5 Help with Repetier firmware variables (Dimension Dual Delta - J Group Robotics) 2017-06-03T18:39:48.547

5 Delta printer nozzle not moving square with a perfectly level bed (as if the bed is bent... but it isn't) 2018-05-24T08:09:34.493

5 Through what methods and mechanisms can a multi-material FDM printer operate? 2019-06-01T14:22:34.160

5 Why are delta bots so finicky? 2019-08-20T13:23:04.320

4 Bed leveling method not working with Repetier firmware 0.92.9? 2016-06-30T16:38:23.227

4 Delta Kossel 3d Printer Heatsink issues 2017-03-31T21:38:52.067

4 Delta 3D printer extruder? 2017-04-04T16:42:23.250

4 Nozzle moves very slowly from home to start position 2017-05-05T11:53:33.177

4 Best 32 bit electronics for delta? 2017-09-23T22:06:29.710

4 Print quality of Kossel clone for Print in Place models 2018-07-08T19:29:03.427

4 Print speed and settings for printing below 0.1mm resolution on PLA 2018-09-11T18:40:57.507

4 Can I repurpose most of the components of this Prusa clone for a Delta? 2019-05-03T16:20:34.980

4 Getting wrong measurements on my Kossel Linear Plus after installing SKR 1.3 with Marlin 2.0 2019-09-26T16:58:02.780

3 Delta printer not responding to changes in DELTA_RADIUS 2017-05-05T01:36:50.657

3 single point z-correction after 3-point auto-leveling 2017-08-21T09:43:04.600

3 Printer going wild mid print 2018-01-11T02:54:44.370

3 Marlin Firmware Auto Leveling only re-centers the XY-axis (Delta printer) 2018-06-25T00:34:15.073

3 RAMPS PLUS 2 and E1 socket problem (K200 Delta, but related to the PCB , not printer) 2018-07-26T20:40:18.700

3 How do you calibrate a delta robot 3D printer? 2018-08-31T17:52:14.807

3 0.9° motors for Delta printers? 2018-12-03T15:23:31.667

3 Delta Printer: After Calibration X and Y Axis are slightly different 2019-02-13T08:41:01.257

3 Deltaprinter scratches print 2020-05-24T16:17:20.553

2 Looking for information on modifying Boots Industries 3D printers 2016-04-12T20:56:20.047

2 Estimating printing time from Cura 2017-05-15T12:29:56.027

2 Delta printer printing incorrect dimensions in X and Y directions. Z dimensions are correct 2017-05-28T14:05:55.497

2 Aluminium cube - fan and hotend mount - is it worth it? 2017-06-08T15:04:33.720

2 How does the auto calibration mechanism for delta printers work 2018-09-24T14:03:49.703

2 Changing FAN0 to FAN1 in TriGorilla printer board 2018-12-17T09:31:20.753

2 Slow speed of the delta 3D printer 2020-03-13T17:37:16.377

2 Looking for files for printed parts for my Kossel XL kit from Builda3Dprinter.eu 2020-04-11T16:53:48.833

2 Why does my Anycubic Predator print backwards? 2020-10-09T20:49:52.050

1 Building new Repetier firmware for a delta printer (D-force) 2017-06-10T08:49:15.687

1 AnyCubic D (aka Predator) - Z-zeroing and first layer issues 2020-01-08T18:37:19.107

1 Partial underextrusion in walls 2020-02-17T22:00:07.827

1 Still got poor printing quality after calibrating my Anycubic Predator 2020-05-14T02:12:24.510

1 Anycubic Kossel Delta switch from Trigorilla to MKS Gen L 1.0 2021-02-05T20:38:08.480

0 LV8729 on kossel issues with print dimensions (steps) 2019-11-11T13:13:10.753

0 Delta Printer Homing Issue 2020-03-04T06:35:28.503

0 Knocking sound from carriages of Delta printer 2020-03-26T08:08:23.087

0 FLSUN QQ doesn't print and stops at Z=15 mm 2020-05-10T12:08:36.423

0 Minimum Solid Figure traced by a Delta 3D Printer 2020-06-25T01:58:12.597

0 How can I improve dimensional accuracy of a delta printer? 2021-01-08T19:18:25.000