Tag: creality-ender-3

11 Ender 3 nozzle homes off the bed in the Y axis 2018-08-10T19:31:29.763

11 First 3 mm prints poorly, then fine after that 2019-01-20T20:07:06.073

10 Why doesn't PLA stick to heated bed? 2019-11-03T15:41:37.627

9 Recalibrating Home-position 2018-07-14T18:47:23.570

8 Inductive Sensor in 24 V machine? 2018-07-10T13:49:35.493

8 Extruder doesn't retract on inner wall lines thereby causing stringing 2018-12-17T18:35:33.537

8 Creality Ender 3 printer power consumption? 2019-04-05T01:18:45.910

8 Why is the center of my glass print bed lower than the corners? 2019-05-18T13:56:47.227

8 Is there a way to save a multi part print if one fails? 2020-07-23T12:23:04.443

7 Ender 3 severe under-extrusion 2019-03-10T18:38:49.920

6 What voltage does the Creality Ender-3 run at? 2018-07-09T15:42:07.727

6 Electric shock from ender 3 printer PSU 2018-08-31T15:23:36.763

6 Adding additional extrusion to a raft (raft with a skirt?) 2018-11-08T13:41:13.097

6 Retraction Causing Skipping 2018-12-17T13:11:56.090

6 Z-Axis does not appear to be working on Ender-3 Pro 2018-12-29T19:47:59.220

6 Ender 3 distance between nozzle and bed changing on Y-axis 2019-02-02T17:47:54.567

6 Why did my printer's nozzle dig itself into my print? 2019-02-02T22:09:25.580

6 How does slipping Bowden tube affect retraction or does it at all? 2019-10-21T16:41:55.947

6 Random lines are being printed? 2019-11-05T23:13:15.840

5 Strange layer separation issues on Ender 3 2018-08-14T04:44:35.477

5 Sudden underextrusion on Ender3 2018-09-02T09:07:26.637

5 PETG filament doesn't stick reliably to fake Buildtak surface 2018-10-06T05:27:46.417

5 What parts are suitable replacements for an Ender 3 Pro? 2018-11-06T00:34:34.183

5 Getting a Cura Raft to stick to the object more firmly (for ABS) 2018-11-10T21:29:03.850

5 Print Lines Aren't Joining Together 2018-11-29T23:39:32.877

5 Infill failure when printing larger prints 2019-02-21T20:14:21.833

5 Should I cooldown before shutdown? 2019-06-15T19:41:16.923

5 How to work with PETG? Settings, caveats, etc 2019-06-17T13:50:30.493

5 How to fight lots of stringing with PLA at low temperature (185 °C)? 2019-08-11T11:17:25.210

5 How to change "home" settings on Ender 3 2019-08-31T12:33:28.350

5 How to calculate the proper layer height multiples? 2019-09-08T09:17:05.357

5 Issue on 2 corners but not the other 2 2019-10-18T08:16:14.143

5 Starting G-code for auto Z probe offset 2019-10-31T02:56:02.650

5 Ender 3 X-axis values are not correct 2019-11-11T07:14:42.987

5 Great prints then suddenly terrible quality 2019-11-18T02:13:25.380

5 Fixing Z-Hop Stringing 2019-12-16T01:03:52.490

5 Ender 3 Extruder First Layer Perfect But Then Starts Clicking Afterwards 2020-02-06T07:07:32.430

5 Ender 3 X-Axis Layer Shifting 2020-06-09T04:49:32.070

5 Ender 3 V2 upgrades and addons 2020-09-02T03:10:08.280

5 Thermal Runaway E1 at Layer 2 2020-12-17T12:30:03.440

5 Why does a raft adhere to the bed while skirt does not? 2021-02-20T23:04:47.373

4 What are the specifications of the dual voltage controller of the Ender 3/CR-10? 2018-08-01T12:47:21.620

4 Ender 3 Calibration Cube Fail + Can't Print Circles 2018-09-08T15:54:48.133

4 Ender 3 is capable of food safe printing? 2018-09-18T00:34:45.077

4 Does the Ender 3 need an 8 pin mini USB or 5 pin, or no difference? 2018-10-07T08:08:17.160

4 What is the point of diminishing returns on the STL refinement level in Fusion 360 on an Ender 3? 2018-10-07T09:24:54.037

4 How to print an item the size and thickness of a laptop display? 2018-10-29T06:49:51.513

4 Creality Ender-3 slanted nozzle 2018-11-09T07:50:22.720

4 Ender 3 Z-limit now unreliable - possible causes and solutions? 2018-11-10T12:35:06.103

4 How to set the boundaries for BLTouch probing 2018-11-10T22:23:45.753

4 Ender 3 extrudes plastic whilst at standstill, and while moving to start of print 2018-11-24T22:55:41.020

4 Why is Print Adhesion almost good, but still not right? 2019-01-01T04:15:05.980

4 Ender 3 homing problem 2019-01-21T19:22:56.540

4 Upgrading to higher torque extruder motor creality ender3 2019-02-23T10:05:14.200

4 Ender 3 Distorted Calibration Cube 2019-02-26T18:43:25.330

4 Strange outer skin print quality on Ender 3 2019-04-05T18:09:44.843

4 Underextrusion after long travels 2019-04-23T08:05:51.343

4 Damage to bed surface from heat or chemical or..? 2019-04-29T00:55:38.327

4 PETG on Ender 3 2019-07-01T05:12:04.783

4 Ender 3 Pro Filament extrusion problems 2019-09-03T20:25:38.783

4 G29 Auto Grid Leveling Doesn't Do Anything 2019-09-12T08:48:42.980

4 G28 ignoring Z-Probe X/Y Offsets 2019-10-08T10:11:11.513

4 Ender 3 Power Problem: Not starting up 2019-10-18T09:17:53.320

4 The part printed correctly except few layers 2019-10-18T14:26:29.653

4 Flashing a bootloader on Ender 3 without Arduino 2019-11-11T09:22:33.147

4 Ender 3 X-axis belt orientation 2019-11-11T23:07:36.620

4 Klipper doesn't seem to adjust Z after BED_MESH_CALIBRATE 2019-11-19T07:19:34.300

4 Ender 3 displaying wrong temperatures for hotend and bed 2019-12-04T00:12:13.813

4 Ender 3 cracking magnetic bed 2019-12-20T00:44:49.583

4 Ender 3 Y Layer Shifting 2020-01-25T21:29:43.127

4 What causes my Bowden tube to melt on the side? 2020-02-19T18:26:15.833

4 Prints coming out very stringy 2020-03-22T12:51:32.983

4 Ender 3 underextrusion 2020-04-19T00:19:47.527

4 First 3D print made up of diagonal strands 2020-04-27T15:36:07.983

4 How to resume an unfinished project 2020-05-19T11:14:17.087

3 Different lengths of filament is extruded with different temperatures 2018-11-29T04:33:33.650

3 When I attempt to calibrate extruder steps the increased values don't correspond to physical increases 2018-12-13T20:59:38.797

3 Stepper motors making noise after steps/when idle 2018-12-20T06:35:02.557

3 Inconsistent inner/outer dimensions 2019-02-09T02:29:53.833

3 Hooking up an optocoupler in a 24V Machine, is a 2 kOhm resistor sufficient? 2019-02-19T03:11:42.517

3 Adhesion issues using AmazonBasics PLA 2019-03-27T01:17:56.050

3 Filament Length too short for extruder to push filament 2019-04-06T08:26:40.260

3 How to connect optocoupler module to ABL sensor and Ender 3 board 2019-04-23T03:35:45.877

3 Ender 3 X axis not level 2019-05-29T17:28:17.730

3 How to solve spillage problem? 2019-06-26T11:47:10.083

3 Is there a way to configure printer extruder to go all way up when printing finishes in Ender 3? 2019-07-18T19:13:58.623

3 Auto home issue on ender 3 2019-08-01T00:20:42.777

3 Inconsistent Layer Issues 2019-08-01T13:28:42.133

3 Y-axis layer shifts with recent Marlin on Ender 3 2019-08-07T23:16:14.850

3 Calibrated Esteps Causes Extruder Skipping 2019-09-17T21:04:59.867

3 How do I set the flow rate on my Ender 3 Pro and have it stay at that percentage? 2019-11-08T17:24:25.857

3 How to correctly clean the Lacquer from bed? 2019-11-19T21:48:14.293

3 Why am I getting Z banding/shifted layer on a single layer? 2019-11-22T13:26:02.340

3 Saving BL Touch settings 2019-12-21T04:12:04.200

3 Brand new Ender 3 does not extrude any filament during printing 2019-12-22T15:39:15.720

3 Ender 3 with BLTouch prints slanted lines 2020-01-04T12:28:15.630

3 Issue with 3D printer making super thin layers 2020-02-22T02:34:52.363

3 Is E-axis steps/mm resolution limiting factor in print quality? 2020-02-28T23:02:34.030

3 Ender 3 nozzle gets closer and closer to the previous layer as the print progresses 2020-04-07T09:19:21.100