Tag: adhesion

14 Why does hairspray work as an adhesive for ABS? 2019-10-16T05:39:49.663

12 Troubleshooting poor adhesion at the edge of the bed 2016-01-15T16:33:07.330

12 Second layer: gaps, poor adhesion - why? 2016-11-24T17:07:25.063

12 Can't get print to stick, no matter what I try 2017-01-05T02:22:18.017

11 Prints are now sticking too well to the bed. What to do? 2016-08-30T18:51:04.977

11 Lines of PLA not sticking to the bed 2017-03-05T20:45:52.083

10 Why doesn't PLA stick to heated bed? 2019-11-03T15:41:37.627

9 One corner never sticks 2016-11-30T17:51:16.927

9 Turning off heatbed for the last few layers. Good idea or not? 2017-02-11T04:25:59.960

9 How do skirts aid print bed adhesion? 2018-05-29T01:40:38.827

8 Adhesion problems with masking tape 2018-01-24T16:43:57.137

8 Getting PLA to stick to a cold bed 2018-02-14T06:52:42.273

8 POM filament not sticking to the build plate? 2018-07-06T11:30:53.763

8 Why does the painters tape have to be blue? 2019-05-20T00:35:25.887

7 My print is warping: how can I ensure that it cools evenly? 2016-01-12T21:00:36.337

7 Poor adhesion only for first couple of inches 2016-10-14T00:54:25.423

7 What is the MakerBot Grip Surface lifespan? 2016-12-11T04:46:59.613

7 PETG layer adhesion 2019-05-26T20:16:06.960

6 Should you use hairspray on a metal bed 3D printer? 2017-03-10T23:27:48.510

6 Bed Adhesion materials 2017-05-11T20:12:39.170

6 Support material first layer adhesion issues 2018-03-28T12:13:05.263

6 Infill not reaching perimeter 2019-04-12T18:31:27.767

5 Glue sticks for print bed 2016-05-06T15:34:40.387

5 What tweaks do slicers use to get rafts to stick? 2017-06-03T00:19:41.740

5 Getting a Cura Raft to stick to the object more firmly (for ABS) 2018-11-10T21:29:03.850

5 Bed too close to nozzle? 2019-01-08T14:45:17.120

5 Filament moving around and not sticking to bed 2019-02-25T22:08:24.473

5 First layer looks weird and print fails 2019-11-30T16:54:34.203

4 Lower BuildTak adhesion 2017-03-24T06:27:41.337

4 Correct amount of force on piece of paper when leveling bed 2017-09-06T08:25:23.983

4 Print slipped away 2018-04-12T21:40:23.060

4 When is kapton tape useful as a bed adhesive? 2018-09-25T19:54:31.450

4 Why is Print Adhesion almost good, but still not right? 2019-01-01T04:15:05.980

4 Under-extrusion after a certain amount of successful layers? 2019-01-21T05:58:41.080

4 What's the difference between "Initial Layer Width" and "Initial Layer Flow" in Cura? 2019-12-28T21:09:47.683

3 Filament lifts from the hot bed while printing 2017-05-09T08:58:14.313

3 3d Print pops off before complete 2018-01-15T00:25:03.230

3 What is the best way to print a model with support material in first layer? 2018-01-21T06:25:47.097

3 Removing protopasta conductive PLA skirt from a bed 2018-03-31T22:48:49.780

3 Printer fails to print a cube 2019-03-19T11:43:28.750

3 Adhesion issues using AmazonBasics PLA 2019-03-27T01:17:56.050

3 Long prints shifting with Ultimaker 2 2019-04-10T08:14:57.157

3 Polypropylene Bed Adhesion 2019-04-18T01:51:39.197

3 Removing glue residue on part after printing 2019-04-25T16:38:27.463

3 ASA and BVOH adhesion 2019-05-07T19:44:06.350

3 DLP build plate adhesion 2019-06-21T19:42:48.493

3 Build plate adhesion, PLA 2019-07-11T08:44:58.130

3 What hairspray brands are known to contain PVA / PolyVinylpyrrolidone 2019-11-08T18:07:52.600

3 Ender-3 Pro - PLA mid-layer warping (layer separation) - salvageable? 2020-04-23T13:50:10.240

2 What do you use to keep your blue tape from lifting? 2018-12-31T20:52:16.257

2 Setting up a brim/raft for only a portion of the overall print 2019-01-07T17:21:15.440

2 Adhesion problem when printing calibration test 2019-01-22T05:25:24.870

2 How to level bed after applying glue stick for bed adhesion 2019-02-01T07:03:26.667

2 How do I get circles on small interior holes to adhere to the bed? 2019-04-16T21:12:54.427

2 How would you clean/prepare a flexible/magnetic mat (e.g. Ender 5) as compared to a glass bed? 2019-07-07T02:34:02.327

2 first layer tearing 2019-08-25T10:41:21.610

2 Alternative raft generation 2019-10-01T19:21:41.183

2 FDM printer first layer infill swell upward 2020-01-18T15:59:48.430

2 Diagnosing why the left side of a print detaches from the board 2020-04-28T05:34:59.320

2 PETG warping - adhesion or temperature too high? 2020-08-02T15:20:15.467

2 Has anyone applied four 200 x 200 mm PEI sheets to a 400 x 400 mm bed? 2020-09-28T16:00:06.823

1 Tell tale signs bed tape has given up the ghost 2018-09-29T16:11:30.780

1 Not starting printing on bed 2018-12-01T11:46:53.337

1 Does anyone know what would cause this? 2019-10-28T05:07:22.337

1 Per-Model Bed Adhesion in Simplify3D 2020-02-24T01:47:47.720

1 How can I add an offset to the first layer to increase clearance? 2020-04-03T16:52:31.170

1 Problem printing circles/holes on Anycubic I3 mega 2020-04-08T08:28:42.607

1 I mistakenly used 90% ethyl alchool to scrape some PLA off my bed; did I ruin it? 2020-07-04T11:50:06.563

1 How to prepare bed for printing ABS filament? 2020-08-14T21:56:15.140

1 Every print drops off plate 2020-08-25T00:16:40.727

1 Problem printing bigger models in the Ender 5 2020-08-25T18:06:18.027

1 Issue with rim of first 5-8 layers of my Prints 2020-10-02T18:53:36.137

1 Filament sticks to nozzle 2020-12-06T22:33:00.670

1 Internal thread not sticking to inner wall 2021-01-04T09:58:19.717

1 Are all glue sticks PVA-based? How to find out? 2021-01-11T09:34:20.120

1 Bed heating stops when paused by filament runout sensor 2021-01-20T00:39:19.087

1 CR-6 SE glass build plate - no lifting possible 2021-01-21T21:49:53.873

1 Irregular adhesion on Creality glass bed 2021-02-26T13:19:13.390

0 Brim around just one section 2020-04-10T17:31:22.187

0 Poor adhesion on new layer - Monoprice mini select 2020-04-15T21:05:03.660

0 Resin prints pulling away from build platform 2020-05-06T20:01:03.137

0 First layer rippling and no filament in the certain areas 2020-05-16T06:53:56.443

0 Do you need to manually level the bed with a BLTouch? Adhesion issues with Ender 5 and BLTouch 1.3 2020-06-11T14:22:45.507

0 Any possible issues with adding heat/cool down cycle in the end of print (PLA) 2020-06-29T02:30:05.760

0 Removing test print from magnetic flexible paper coated build plate 2020-09-13T14:09:28.113

0 What are the pros and cons of Painters tape? 2020-11-04T14:59:36.520

0 CR-10 not printing properly after Marlin 2.0.x and BLTouch installation 2020-12-08T03:40:56.877

0 Layer bending with first layer not sticking 2020-12-27T12:39:38.463

0 How to attach PEI sheet to glass for high temperature printing? 2021-01-06T21:39:21.730

-1 Use fixation holes instead heated bed 2020-05-16T19:45:36.947