Tag: abs

37 How is PLA different from ABS material? 2016-01-12T18:53:53.623

31 How to recycle filament material from printed parts? 2016-01-12T20:37:19.573

28 Why do the corners of my ABS object lift off the bed? 2016-01-12T20:40:43.047

23 Does filament have to be stored in an airtight environment? 2016-01-12T21:57:01.307

20 Would 3d-printed objects outgas in vacuum? 2016-01-12T22:10:12.917

19 What to do with failed/unwanted 3D prints? 2016-06-06T04:59:03.687

18 Can I mix ABS and PLA when recycling filament? 2016-01-14T21:48:19.053

17 What can I use to "sand" my ABS prints? 2016-01-13T00:41:32.907

14 Safety precautions when using acetone 2016-01-12T21:50:45.197

11 How can I stop my print bed tape from sticking to the filament? 2016-01-12T21:30:33.083

11 Layer delamination 2016-05-03T16:21:48.817

9 What can cause a sudden and dramatic loss in the inter-layer registration of my prints? 2016-01-13T06:35:47.820

9 Why is my print displacing along the y-axis by 2-3 cm? 2016-03-30T18:29:59.650

9 Wanhao Duplicator i3 ABS settings 2016-05-04T16:34:55.610

8 ABS Filament safety concerns 2016-06-23T18:52:39.113

7 How to minimize damage when removing an ABS print from a heated glass print bed? 2016-01-15T00:47:30.323

7 Maintaining fine details while applying smoothing methods 2016-01-22T06:03:58.597

7 Raft hard to remove? 2016-05-31T20:03:01.093

7 ABS or PLA for structural printed parts? 2017-04-30T13:12:33.240

7 "Tac Tac" sound when printing with ABS 2017-06-27T11:34:09.267

6 Is 3D printing feasible for a coaxial rotational joint? 2016-03-07T18:42:44.330

6 Should I consider health impact of ABS or PLA when printing cookie cutter? 2016-05-31T16:52:13.810

6 What are the costs per meter of filament for PLA, ABS and PET? 2016-06-29T16:48:35.167

6 Typical plastic strength at 1500 RPM 2016-09-20T20:02:48.670

6 Large flat ABS print curling during cooldown 2016-10-27T16:04:11.773

6 No Z hop in Dual extruder, print getting disturbed at retraction point 2017-01-20T01:10:43.790

6 How many grams will be used in a print 2017-03-14T20:53:52.453

6 Printing Object in multiple parts 2017-10-26T06:14:27.227

6 Are 3D printed gears applicable for industrial use? 2017-12-16T15:41:51.290

5 How thin can I make the wall of a pipe? 2016-01-13T21:23:20.463

5 What does a "3 h5" mean in reference to the axle of a motor? 2016-04-15T12:29:19.757

5 Glue sticks for print bed 2016-05-06T15:34:40.387

5 Looking for a material so I can make ABS parts with rubber grips and feet 2016-07-24T03:49:04.923

5 Extruder skipping/clicking (brand new printer) 2017-01-14T21:42:08.230

5 How do I give 3D-printed parts in ABS a shiny smooth finish? 2017-05-19T14:16:04.457

5 Weird ripping and warping of ABS print 2017-08-22T19:32:11.643

5 Monoprice i3 clone heat shuts off printing abs 2018-04-23T18:33:31.267

5 Strange grooves with ABS 2018-06-01T17:53:13.627

5 Is there a way to print with ABS without enclosure? 2019-06-25T07:49:58.890

4 is PLA gasoline, diesel or chemical resistant? 2016-10-16T19:29:07.013

4 How to print a 6" wheel in ABS? 2017-01-11T20:49:52.380

4 Embedding nuts and washers into print 2017-04-19T13:05:37.113

4 Best method to make dissolvable supports? 2017-05-21T05:21:40.173

4 Looking to use 3D printing to make a master plate for rubber stamp vulcanizing 2017-08-25T06:31:02.997

4 Ramps 1.4 and extruder 2017-11-02T19:47:54.820

4 Acetone smoothing not working on ABSPlus-P430 2017-11-08T12:28:51.957

4 Cement or another solid pore filler suitable for ABS? 2017-11-13T16:09:55.073

4 Increasing rigidity of curved, long, thin parts 2018-01-15T05:50:11.280

4 3D printer filament will not load after running the printer out of filament 2018-06-04T17:12:49.220

4 Enclosure Ventilation 2018-06-17T11:49:21.653

4 When is kapton tape useful as a bed adhesive? 2018-09-25T19:54:31.450

3 What's smoother? Acetone treated PLA or ABS 2017-06-14T15:56:58.717

3 How to prevent layer separation, when printing tall vase-like (tube) objects? 2017-08-15T09:28:01.347

3 What infill settings and material type do I need? 2017-11-29T16:07:25.517

3 What do you recommend for removing prints from Monoprice Maker Select bed? 2018-12-07T04:27:58.570

3 Best way to fix ABS corner curling on enclosed Prusa style printer with PEI heatbed? 2019-04-15T12:57:30.940

3 3D Print Enclosure 2019-07-03T21:12:15.560

3 Acetone Smoothing an ABS Cone - (New to 3D printing) 2019-11-19T10:11:08.900

3 How to solve ABS deformation at the bottom? 2020-08-06T13:21:59.963

2 What kind of filter do I need for the enclosure of a 3d printer? 2016-02-17T14:42:23.657

2 Hictop 3d printer upgrades? 2016-02-20T02:28:11.740

2 What is PEI+PC 3D Print material? ISS 3D Print Contest 2016-07-26T17:40:49.773

2 Printer changing temperature after selecting file 2016-12-25T21:04:16.493

2 How to increase the printing quality when using abs (slicer config)? 2017-11-13T15:30:04.047

2 Cooling time query ABS 2018-02-02T13:10:08.097

2 Printing temperatures for ABS on a Flashforge Adventurer 3 2019-03-15T19:27:40.177

2 ABS de-layering on Ender 3 2019-06-21T01:20:27.210

2 What kind of paint and varnish can be used with ABS? 2019-08-26T15:35:51.773

2 What causes these blobby corners 2019-09-19T01:26:06.760

2 Making Polyurethane molds with PLA (or ABS) 3D printed master 2019-10-09T18:21:33.707

2 Filament change (M600) causes color mixing despite excessive purge 2019-12-05T23:43:39.557

2 Prusa MK3S Nylon&ABS print failures 2020-04-04T16:27:38.423

2 Are there differences in filament consumption between ABS and PLA 2020-10-21T19:45:02.617

1 FDM, ABS Post-processing methods 2017-03-20T00:12:31.033

1 I need an acetone substitute 2017-05-20T20:46:47.597

1 Which 3D printer should I use to make custom miniatures for a tabletop game? 2017-06-23T20:17:19.010

1 Does HydroFill support material work with ABS? 2017-12-19T11:59:27.227

1 How to paint ABS to look like wood 2018-11-26T11:23:30.187

1 Nail polish remover that won't dissolve ABS? 2019-09-20T02:17:29.713

1 3D Printer does not print whole object 2020-03-25T02:45:11.480

1 Consistent blobbing and gaps in print towards right side 2020-04-08T18:41:17.503

1 How to prepare bed for printing ABS filament? 2020-08-14T21:56:15.140

1 How to set multiple draft shields in Prusaslicer? 2020-12-07T14:44:50.993

0 Good profile for slicing ABS in Slic3r? 2019-05-04T02:06:13.443

0 Why can't I use PLA with ABS in a dual extruding 3D printer? 2020-01-24T19:32:05.103

0 What is the best method to use to glue ABS parts together? 2020-03-11T08:36:22.547

0 Is nozzle no longer heating up correctly related to hotend insulation being pulled off? 2020-08-11T23:45:21.013

0 Enclosures (w.r.t. emissions) useful for not only printing ABS? 2020-10-26T23:54:48.337

0 How to switch from PETG to either PLA/ABS mid print? 2021-01-27T17:00:50.830

0 Unwanted texture at base of ABS print 2021-02-24T01:02:06.980