Tag: tool-selection

13 Does it matter what kind of diamond stone I get? 2015-09-17T20:36:03.003

13 Caliper Showdown: Dial vs. Digital vs. Vernier 2015-10-18T00:37:55.197

13 How can I cleanly cut a large circle out of plywood? 2015-10-22T14:46:15.410

13 Why are keyed drill chucks still available for modern tools? 2016-02-24T13:02:30.037

10 Are there alternative tools to a straight ironing rasp (or why are they so hard to find)? 2015-10-08T08:07:11.317

10 Tungsten Carbide grades 2016-04-11T23:59:46.740

9 Do auger bits have advantages? 2015-07-19T12:59:52.723

9 What should one consider when purchasing an intro turning chisel set? 2015-10-22T21:56:28.710

9 Do you need to countersink self-countsink screws 2016-03-24T10:58:51.183

9 What determines carving tools/chisels quality? 2016-11-12T01:06:38.653

8 Pyrography criteria to justify changing tools with different woods? 2015-06-18T06:16:03.367

8 Is all fine grit count sandpaper called wet/dry? 2015-07-23T03:07:58.397

8 Cutting a wooden box into 2 pieces, with special shape 2015-08-02T15:03:22.617

8 What is the difference between a dead center and a live center? 2015-08-22T02:25:22.687

8 What features and accessories should I look for in purchasing a used lathe 2016-03-07T00:09:37.330

7 How can I create a wooden torus/doughnut? 2015-06-15T02:09:02.703

7 What is the old-school way of smoothing a curved surface? 2015-06-15T06:46:02.150

7 How can I debark wood? 2015-08-04T15:31:43.803

7 What tools/methods I could use to create a small circular recess? 2015-08-24T00:19:44.327

7 Sanding inside pockets, fast 2016-04-15T18:02:05.783

6 How do I flatten portions of a 1" dowel equally on both sides? 2015-07-31T16:23:29.317

6 What is the difference between a $40 dado blade set and a $240 dado blade set ... besides the price? 2015-08-26T20:41:01.450

6 Small, Lightweight woodworking bench Styles 2015-09-11T03:48:02.380

6 What hand tools to use for rounding edges and creating pockets? 2015-09-13T20:49:11.570

6 Substitute for Bench-Top Jointer 2015-10-21T20:11:47.647

6 What tools can I use for carving 2015-11-10T07:54:27.523

6 Help needed to decide between a miter saw or sliding miter saw 2015-12-12T06:33:04.277

6 Build a grid out of vertical, thin wood bars 2015-12-20T20:42:37.727

6 What are the ideal traditional tools to use for creating an inlay? 2016-04-15T12:28:58.770

6 What is the difference between a worm and sidewinder drive circular saws? 2016-04-20T11:50:42.100

6 Substitute for Pocket Hole Jig? 2016-12-09T16:48:02.370

5 How can I tell if leather is vegetable tanned? 2015-07-26T14:23:54.947

5 How to cut an opening and door out of 3/4" Plywood 2015-09-18T04:57:20.083

5 What is an accurate and safe way to piece together wood with a rhombus cross section? 2015-10-03T12:26:03.210

5 What tools could I use to cut a turned chair leg in half vertically? 2016-05-03T01:40:55.600

5 How do I know what tools I need? 2016-05-15T19:06:33.470

5 How can I hollow a cherry log to use as a newel post? 2016-06-28T18:17:31.547

4 What tool can cut thin wood or acrylic/plexiglass without melting it that is suitable for NYC apartment? 2015-10-15T21:53:21.087

4 What method or tool is available to make the following type of hole/indent in a piece of wood? 2015-11-06T18:11:11.323

4 What are the differences between the K4, K5, and Foreman Pocket-hole Machine? 2015-12-07T18:35:51.310

4 Pneumatic vs Electric Brad Nail Gun 2015-12-21T02:35:32.533

4 What is the recommended way to mortise melamine particleboard? 2016-01-09T10:16:18.037

4 What's the name of this tool/bit with a triangular tip? 2016-02-05T05:38:10.003

4 How to make a wood gear? 2016-05-09T15:58:38.683

4 Can I use sculptor chisels with a lathe? 2016-06-28T22:03:47.157

4 Tool recommendation to prick bamboo nodes 2017-05-26T07:42:03.090

3 Finish after using chalk paint 2015-10-13T03:17:33.390

3 What type of lathe do I need for duplicating parts 2016-02-25T04:39:53.970

3 How can I improve my strategy for flush trimming with a router? 2016-04-04T13:35:36.517

3 What is the functional purpose of fluted dowel? 2016-04-14T13:36:46.690

3 Choosing a saber saw for long blades (12" and 18"). What does the maximum length specified in a saw depend on? 2016-08-22T21:11:25.093

3 Finishing a narrow cavity 2017-02-22T16:24:02.253

3 Measurements on a Try Square 2017-09-12T11:53:36.053

2 What is the best drill bit for MDF? 2015-12-07T22:31:23.703

2 Easy options to mount a 2x6 to concrete 2015-12-21T02:47:34.230

2 Squaring wood with limited available tools 2015-12-25T16:46:53.830

2 Scroll or Band saw? 2016-09-10T04:51:28.987

2 How do I join wood in an A frame for a beginner? 2016-12-29T21:26:46.640

1 Beginner wood carving tools 2016-04-23T16:33:37.543

1 How is this large and intricate piece made with such precision? 2017-07-06T03:07:24.203

1 What is the clamping force of a "T-bar" sash clamp (or how can I work it out)? 2017-09-05T15:27:04.587

0 Can you make shaker doors out of one piece of MDF? 2016-04-20T22:46:10.583

0 How to make small wooden toy pieces 2017-02-28T20:23:24.157

0 Considerations for cordless circular saw blades - effects of kerf, coating and geometry on performance? 2017-04-07T14:19:59.940

0 The Tools used on this cane? 2017-09-03T09:37:22.410