Tag: strength

10 Is there a reference for how much weight a dowel rod can support before breaking? 2015-06-10T12:53:05.853

10 Make a bunk bed 2015-10-13T11:05:28.797

7 How do I calculate the amount of downward force a nail will support? 2015-03-17T21:04:38.600

6 How can I design a large cherry table with no aprons? 2015-06-01T10:07:54.487

6 Using softwoods for bench tops 2015-09-06T01:57:16.010

6 Make a bunk bed v2 2015-10-15T16:06:54.533

6 Shelf made of 1x2 pine boards. Stable? 2016-10-10T18:06:23.427

5 Can you make a small wooden sail boat from cedar? 2015-04-01T19:35:07.443

5 Supporting a level box on an uneven surface 2016-03-09T14:51:01.870

5 How can I strengthen my 3/4" Plywood Bunk Bed Plan? 2016-12-04T16:47:30.637

4 How can I create a sturdy walking cane 2015-10-10T18:11:44.930

4 Should I orient the cupped sides toward each other when laminating boards? 2015-11-14T12:06:26.927

4 8 to 12 mm plywood box joints: brackets vs glue(box joint) vs screws 2016-04-14T13:57:37.553

4 Question about the strength of Douglas fir 2017-04-15T02:30:12.540

4 How to make bottom for a big drawer? 2017-06-01T04:36:16.300

4 Strong method for bottom of a box 2017-10-23T19:54:48.843

3 Maximum size for an unsupported bench 2015-08-19T22:11:10.930

3 Structural engineering with wood: determining post size, span, etc, for a timber frame house 2016-02-21T11:55:07.817

3 Can I make a stool from thinner OSB 2016-05-24T12:41:47.137

3 When do I need to support the center of a horizontal, load-bearing board? 2017-08-23T22:47:52.927

2 Lightest woods that would be strong & stable for 2 components of DIY Wall Stall bar? 2015-12-19T12:50:41.337

1 Where should the trademark be placed on a baseball bat? 2016-03-07T17:23:55.957

1 Lumber Dimensions for Brachiation Ladder (Monkey Bars) 2016-07-21T01:23:57.360

1 For a kid's balance beam, which way should the grain face? 2016-12-05T01:11:38.713

1 How might I design a "quick-breakdown" feature to allow easy assembly and disassembly of this floating beds frame supports? 2016-12-07T03:40:11.933

1 Carving a wooden handle - any rules of thumb? 2017-01-24T19:51:46.790

1 Is standard box joinery sturdy enough for a hollow table leg? 2017-04-21T15:49:34.523

1 What depth and offset from edge my dado / groove in particle board should be? 2017-06-08T08:39:00.900

1 How to stop cat shelf split 2017-11-03T13:33:32.593

1 Guess How much Weight the table can hold 2017-11-21T19:02:23.883

1 Would a threaded insert placed in or near the seam of a biscuit joint affect its strength? 2018-01-12T23:16:11.280

1 Copycat furniture legs 2018-01-17T15:20:10.987