Tag: safety

38 How do I prevent dangerous kickback on a table saw? 2015-03-17T15:37:42.430

26 What is the recommended height of the blade on a table saw while operating? 2015-04-20T19:16:28.620

24 When, if ever, is it safe to use gloves with power tools? 2015-03-17T18:21:46.013

18 Why and when should I wear a dust mask? 2015-06-04T19:25:47.363

17 Is working with MDF going to kill me? 2016-03-02T14:20:15.143

16 How can I safely move complete 4 ft x 8 ft sheets of plywood alone? 2015-04-23T16:50:42.877

16 Is PVC pipe safe to use for a dust collection system? 2015-05-17T18:15:30.150

15 Is this table saw lathe jig safe? 2015-03-17T17:52:47.897

15 Is it safe to resaw on a table saw? 2015-05-11T21:01:20.527

15 What kind of fire extinguisher should I have in the shop? 2017-02-14T21:30:43.687

14 What kind of wood dust is toxic/dangerous and requires usage of dust mask? 2015-03-23T16:48:09.330

14 How do I properly dispose of a solvent like mineral turpentine? 2016-06-14T12:28:40.473

13 What kind/style of respirator is appropriate for someone with a beard? 2015-05-07T17:16:00.010

12 How can I determine the load capacity of a simple bench? 2015-03-18T01:56:00.880

12 Eye protection for someone who does not wear glasses? 2015-03-18T19:37:44.623

12 How can I bring an old, disused table saw back into active and safe use? 2015-03-20T21:32:01.527

12 What do I need to know when looking at pallets for wood? 2015-03-23T04:06:32.377

12 What is the minimum length I can thickness plane? 2015-04-01T21:38:59.047

12 How can I properly dispose of rags used with Boiled Linseed Oil 2015-04-12T01:03:28.450

12 What common woods produce the safest/most harmful dust? 2015-04-17T23:50:30.177

10 How to sharpen a circular saw or mitre saw blade 2015-03-21T18:53:49.360

10 Are there any alternatives to a SawStop? 2015-04-08T06:11:58.353

10 Respirator: do not use for hardwoods? 2015-04-09T19:05:52.273

10 What is the difference between a riving knife and a splitter on a table saw? 2015-04-17T16:28:10.353

10 What types of table saw cuts cannot be made with a riving knife installed? 2015-05-05T17:23:58.767

10 How can I cut plywood in a straight line on a smaller table saw freehand? 2015-05-13T19:43:49.770

10 Is Frank Howarth's homemade table saw splitter safe? 2015-07-08T23:52:26.227

10 Is a climbing cut on a table-saw ever justified? 2015-07-15T22:20:31.353

10 What is the hook angle on a saw blade? 2015-07-16T06:11:28.790

9 Recycling "pre-loved" lumber -- techniques? 2015-03-22T15:27:44.643

9 Can you use painted wood in a planer without damaging the tool? 2015-03-31T01:04:20.377

9 Can one safely mount an 8" blade in a 10" saw if the arbor sizes are compatible? 2015-05-02T14:16:41.260

9 When do I need to use a router table instead of a handheld router? 2015-05-05T19:36:53.867

9 Body positioning while using a jointer 2015-07-27T14:44:19.507

9 Building a safer blade guard on a table saw sled 2016-01-27T16:54:08.530

8 Optimum amount of hearing protection? 2015-03-18T16:45:33.560

8 Would a thick riving knife be useful with a dado stack? 2015-05-03T05:48:49.637

8 What do I need to know for basic lathe safety? 2015-05-05T02:23:34.210

8 When is it not possible or not practical to use a blade guard? 2015-05-05T17:03:15.380

8 Can I make a dado blade set out of multiple regular blades? 2015-05-07T02:23:45.347

8 Making safe cuts: Sliding miter saw vs Radial-arm saw 2016-01-25T23:40:59.760

8 Table saw safety devices 2016-04-12T17:55:52.200

8 Use a fence with a router bit with a bearing? 2016-10-24T21:36:24.677

8 Using a table saw in an apartment room 2017-07-06T20:46:31.657

7 Safety when working Tasmanian Blackwood 2015-03-17T22:53:23.263

7 How do you prevent a turned workpiece from exploding while you're working on it on the lathe? 2015-03-20T17:33:44.103

7 Is a shorter rip fence safer? 2015-04-18T05:03:42.977

7 Should I drain my air compressor after every use? 2015-05-07T15:54:51.043

7 How can you safely operate a router table without a fence? 2015-07-18T02:04:40.810

7 What safety precautions should I take when using a jointer? 2015-07-27T16:58:43.173

7 Is there a safe way to make a plunge cut with a chainsaw? 2015-10-05T16:22:27.383

7 Can wood dust cause irritation to other people in the house? 2016-01-07T12:28:36.580

7 How do I know when it is too cold to work outside? 2016-01-31T15:18:35.587

7 UFP treated woods for raised garden bed 2016-05-20T03:30:15.480

7 Safety - Cutting multiple pieces at the same time 2017-03-16T18:48:29.110

6 How can I stop my belt from drifting off my sander? 2015-04-06T18:04:07.057

6 Am I able to make a wooden Zero Clearance Insert for my tablesaw? 2015-05-01T20:44:49.447

6 What type(s) of glue can I use on wooden kitchen utensils and devices? 2015-05-11T12:33:04.977

6 Yellow discoloration on a walnut board 2015-08-22T16:53:59.960

6 Table saw technique, cross-cut dados on multiple boards 2015-10-28T13:05:33.300

6 How to determine if a router bit is safe to use? 2015-12-14T14:32:05.303

6 Can I expect an improved weekend shop experience from installing an air filtration system? 2016-02-25T05:42:01.493

6 Are there any best practices when using dado blades or stack? 2016-04-29T18:18:54.320

6 Shelf made of 1x2 pine boards. Stable? 2016-10-10T18:06:23.427

5 Noise ratings of equipment 2015-03-18T17:10:42.467

5 Woodshop and fiber insulation 2015-05-09T18:49:10.570

5 Can I run a router bit over its max RPM? 2015-12-10T00:12:39.487

5 Are active charcoal air filters effective against finishing fumes? 2016-02-18T11:41:26.810

5 LED Lights for the Woodworking Workshop 2016-03-17T18:27:28.677

5 Using plexiglass instead of aluminum plate for router table 2016-11-13T20:12:55.850

5 Working with Wenge or Purpleheart 2017-05-24T00:50:02.723

4 What woods or wood materials are unsafe for use in animal cages? 2015-03-18T15:57:29.700

4 How do I use a cross-cut sled safely? 2015-11-07T20:30:16.073

4 How to lower large equipment down the basement stairs 2016-01-30T16:58:35.620

4 Cleaning old hard wood 2016-02-24T19:30:36.640

4 Process for Food Safe Finishing 2016-05-10T04:11:37.783

4 What are some good ways to fasten beams to posts for a swing? 2016-06-28T11:41:26.793

4 How to cut down bifurcated trees on a slope 2016-07-24T17:49:39.243

4 What wood is not good to use in a cutting board? 2016-08-03T21:49:25.820

4 Safest way to cut very small blocks 2016-08-09T17:09:05.417

4 Stopping a table saw by turning off at the outlet 2017-11-24T15:37:55.143

4 Is it appropriate for an 8 year-old to act as a 'helper,' ripping sheets on a table saw? 2018-02-17T22:59:54.533

3 Maximum size for an unsupported bench 2015-08-19T22:11:10.930

3 What are some good ways to hang plywood from a wire? 2016-05-12T07:57:37.843

3 Do I need to worry about wood dust for very small-scale manual sanding? 2016-05-12T21:20:26.083

3 Is the off gassing from plywood harmful when used in a cooking device? 2016-08-26T22:27:30.683

2 Is the wood worm active or not? 2015-12-29T09:02:33.340

2 Are barrel nuts strong? 2016-09-18T21:03:02.953

2 Bandsaw GFCI tripping 2017-07-31T22:14:45.050

2 static shocks from festool router 2017-09-03T07:39:52.517

2 How can I safely cut this thin stock with a small angle on a right tilting table saw? 2017-10-18T17:03:34.330

2 Questions around designing and building an indoor climbing frame 2017-10-25T13:46:30.953

1 Bandsawing a small log - how to keep the log on the bandsaw table? 2016-02-25T06:04:03.337

1 How can I sanitize wood? 2016-10-07T15:20:16.310

0 Can I put wheels on a bunk bed? 2016-02-11T20:25:43.470

0 How much weight can this stand hold? 2017-01-08T18:54:01.520

0 Safety of commercial oil for cutting boards 2017-08-14T22:11:36.140

0 Can I use polycarbonate sheets in a candle holder? 2017-09-12T11:56:58.183