Tag: furniture

18 How do I ensure my drill is perfectly vertical before cutting a hole in my desk? 2015-03-17T18:31:31.023

17 How can I attach a solid table top to perpendicular cross rails? 2015-04-07T20:36:47.287

14 What is the name of the corner joint with grooves on this chair? 2015-04-29T15:53:13.010

14 At what stage of basic furniture making should I "finish" the wood? 2015-05-13T12:29:57.820

11 What type of joint should I use for building a piece of furniture that will be assembled and disassembled? 2015-05-13T21:25:15.557

10 Is it a good idea to apply lacquer over shellac? 2015-05-01T13:21:34.903

10 What are some guidelines to consider when determining the thickness of boards to use? 2015-05-11T16:44:50.223

10 Choosing wood and finish for outdoor furniture 2015-05-21T03:02:47.497

10 How can I deal with wood from DIY stores that is crooked and may or may not be dry? 2015-04-26T00:39:06.180

9 Can veneer be patched or do you have to peel it off and start over? 2015-06-02T18:03:26.870

9 How to repair missing chunk of wood from cabinet door? 2015-06-24T04:57:53.227

9 Mortise and tenon joint proportions for 3 wooden beams corner 2016-04-09T12:33:04.110

8 What type of tree to use for branches as dinner table legs? 2015-03-18T20:21:52.450

8 Creating my first wooden gaming table 2015-04-11T20:53:43.193

8 What is the best way to install full extension drawer slides in a cabinet? 2015-04-14T13:27:24.103

8 Building A Table - Help With Wood Selection and Joints 2015-04-17T03:54:20.333

8 How to find out what kind of finish is on a piece of furniture 2015-04-24T19:50:18.643

8 How to protect worn wooden outdoor furniture? 2015-05-09T20:19:40.147

8 How thick do slabs need to be in a slab bench? 2015-05-11T03:43:42.950

8 Best sander for rustic wood 2015-05-24T20:50:11.703

8 Curved wood pealing away from table edge 2015-06-12T20:06:42.603

8 How should I calculate the height of the chair needed for a table? 2015-07-20T06:01:01.160

8 Type of wood glue-up used in some Ikea furniture? 2015-07-26T08:12:11.277

8 How to can I repair/mitigate rot in the center of a Western Cedar tree round? 2015-07-28T16:58:44.067

8 What are strong methods to secure a stripped wood screw in hardwood? 2015-10-15T18:02:11.653

8 What techniques are there to find the optimal wood cutting list for a project? 2016-01-18T22:10:02.363

7 What kind of finish should I use inside dresser drawers? 2015-07-06T20:42:11.680

7 How do I remove a watermark? 2015-09-13T07:08:46.010

7 Options for sanding this type of bandsawn woodwork 2016-05-30T12:04:05.537

6 How can I design a large cherry table with no aprons? 2015-06-01T10:07:54.487

6 Is there a procedure or equation to calculate optimal height of a seat based on a given person? 2015-06-03T12:55:43.240

6 How would I go about achieving a curve in wood? 2015-06-17T23:09:33.643

6 Best surface for a workbench / desk? 2015-06-28T18:36:30.350

6 Arcade Coffee Table drawer 2015-09-23T01:38:24.307

6 Make a bunk bed v2 2015-10-15T16:06:54.533

6 Why is this yellow colour coming through the finish 2015-10-28T22:48:15.600

6 What options do I have to repair this chair? 2016-03-30T00:26:39.477

6 Furniture name for waist-high floor-sitting shelf cabinet thing 2016-11-10T16:25:10.067

6 What is causing this poor refinishing result and how do I fix it? 2016-12-28T00:20:24.067

6 How to build a double X table leg 2017-02-21T01:00:57.370

5 Can I get some tips or criticisms of this couch plan? 2015-04-28T03:34:34.897

5 How can I match a finish on furniture when re-finishing? 2015-04-30T04:49:31.623

5 How to deal with wood expansion when combining with a steel frame? 2015-08-18T02:48:00.087

5 Joining an irregular, detachable modesty panel together and to an irregular shaped desk 2016-02-01T17:04:49.280

5 What joining methods would be best for the legs and other areas of a height adjustable desk? 2016-03-10T06:18:46.230

5 Do pocket hole screws allow for proper expansion and contraction in planked table tops? 2016-03-17T21:49:53.523

5 Remove nails from table frame 2016-05-25T23:08:14.523

5 Polyurethane Book Case is Rough, Sand in Place? 2016-06-23T14:57:20.023

5 Painting a kid's bed frame 2016-08-11T16:22:12.310

5 Is it necessary to cover all veneered particle board ends? 2017-06-01T07:47:49.897

4 refinishing dining chairs 2015-04-29T15:42:35.343

4 How can I turn a couple of logs into stubby legs for a outdoor tree round table? 2015-08-18T18:37:45.710

4 Are oils sufficient for the last step of finishing? 2015-09-29T11:56:19.563

4 What material is suitable for a children's desk/furniture? 2015-10-19T18:20:46.583

4 Attaching Legs to a Table 2015-11-21T01:44:09.947

4 Is there a generic reason to mark work with Roman numerals? 2016-04-04T14:22:58.133

4 Is making a breadboard table top using just pocket joinery asking for future problems? 2016-04-10T21:10:53.603

4 How to treat floor-facing edge of OSB for a stool leg? 2016-06-01T14:02:35.017

4 Use 3/4" wood for Adirondack chair? 2016-06-07T14:40:48.043

4 How thin is too thin for a large dining table top? Is 11/16" too thin to properly attach to the table base? 2016-06-26T03:45:03.007

4 Where do I put the standards for adjustable shelves? 2016-07-08T00:42:06.913

4 What are these wooden posts? 2016-08-11T04:53:10.250

4 Attach fastener into glue joint of two face-glued boards 2016-08-15T14:54:53.653

4 How to make large table less springy in the middle 2017-01-29T18:40:06.347

4 Should I seal my bed slats, and if yes, with what? 2017-03-20T17:03:45.503

4 How to stabilize a table with hairpin legs? 2017-04-08T12:55:46.570

4 Best way to join pieces of L shaped desktop 2017-04-17T18:01:14.363

4 Do I have to treat the wood before I assemble it? 2017-08-26T10:35:54.557

4 Hanger bolts on chair legs keep coming loose 2017-09-02T03:12:46.090

4 Wood movement with L-shaped mitred leaning shelf 2018-03-07T00:09:48.687

3 Finish after using chalk paint 2015-10-13T03:17:33.390

3 How do you use a 2D template with a lathe? 2015-11-10T02:08:50.843

3 How can I create a wood-like pattern in white-painted furniture? 2015-12-01T14:53:46.463

3 Plastic wrap finished furniture piece for long term storage? 2016-02-08T14:48:23.163

3 What is the functional purpose of fluted dowel? 2016-04-14T13:36:46.690

3 Best way to join frame members in a rectangle box using bolts? 2016-05-24T13:37:45.047

3 What are the name and origin of the woodworking style used for this wooden cabinet with rounded features? 2016-06-06T08:40:45.257

3 Weight bearing for a loftbed and wood only joints 2016-08-05T18:47:44.720

3 No rear clearance spring assisted lid hinge system 2016-10-04T04:12:23.657

3 How can I be sure my workpiece feet are level, when my workshop floor isn't? 2016-10-08T09:16:51.610

3 Looking for non-threaded inserts 2017-01-12T05:48:30.257

3 What kind of wood is thin enough to cut with a knife, but strong enough for doll furniture? 2017-01-27T15:31:52.457

3 "Presanding" wood, before assembly? 2017-02-10T01:30:15.393

3 Leg basics for stools, chairs, table 2017-02-21T18:46:35.447

3 Would 4 post legs work on an 8' x 40" x 1" table? 2017-06-09T02:54:30.860

3 Is there a better way to join these two boards for a platform bed? 2017-06-19T01:19:02.557

3 How can I paint furniture so that it can be stripped later? 2017-11-07T21:45:33.283

3 What is the minimal spacing between edge of leg pommel and mortise and tenon apron (intersected by tusk tenon) 2018-03-06T05:28:29.607

2 how can I make a cedar tree round into an outdoor table? 2015-07-28T15:31:57.147

2 Wood coat stand help needed 2015-12-15T13:50:08.093

2 What is a camber exactly? 2015-12-20T01:36:35.140

2 Squaring wood with limited available tools 2015-12-25T16:46:53.830

2 Is the wood worm active or not? 2015-12-29T09:02:33.340

2 Load Bearing of Legs and Wood Movement on TV Console 2016-08-31T16:41:15.207

2 Are barrel nuts strong? 2016-09-18T21:03:02.953

2 How can I carve out an inset in butcher block? 2016-11-14T17:07:31.137

2 Ideas for converting dining table to adjustable height coffee table 2016-11-30T18:58:41.073

2 Is it safe to keep the bark on a fresh/green slice of tree trunk? 2016-12-05T19:53:47.203

2 Best way to attach metal legs to corner desk? Do I need extra support? 2017-02-20T13:06:53.510