Tag: design

10 How do I create the decorative/ornamental elements of a picture frame? 2015-06-05T20:23:28.393

10 Wood to Use for 3ft Sorority Letters 2015-07-30T20:10:21.943

10 Make a bunk bed 2015-10-13T11:05:28.797

10 Is there a average depth that works best for book shelf? 2015-12-04T16:07:03.143

9 How could I have designed this cabinet to avoid assembly and alignment problems? 2015-12-17T16:48:17.713

9 Mortise and tenon joint proportions for 3 wooden beams corner 2016-04-09T12:33:04.110

8 Creating my first wooden gaming table 2015-04-11T20:53:43.193

8 How should I calculate the height of the chair needed for a table? 2015-07-20T06:01:01.160

8 Gluing plywood to plywood for doll's house floor 2015-09-25T09:41:30.207

8 Corner butt joint, longer top or longer sides? 2015-10-24T00:28:53.193

7 How to hinge a piece of wood for an up/down configuration? 2015-04-18T05:01:19.910

7 Does engineered bamboo require considerations for expansion and contraction? 2015-09-26T23:22:40.250

7 Installing fancy distressed wall hanger knobs 2015-11-01T21:08:25.300

7 Why keep gaps in siding of outdoor furniture project? 2016-04-22T13:11:09.263

7 Cherry wood for dining table - Strong enough or should I consider Walnut? 2016-06-11T22:26:25.363

6 How can I design a large cherry table with no aprons? 2015-06-01T10:07:54.487

6 How to make a heptagonal construction set? 2015-09-11T06:41:59.683

6 Arcade Coffee Table drawer 2015-09-23T01:38:24.307

6 How to setup joint proportions? 2015-09-30T06:37:59.620

6 Front and Leg vise 2015-10-25T14:37:23.740

6 Building a wooden arcade stick case 2016-05-02T20:04:30.637

6 Invisible wall mounts 2016-10-30T01:22:40.217

5 Can I get some tips or criticisms of this couch plan? 2015-04-28T03:34:34.897

5 Considerations when making my own threaded dowel for a vise 2015-10-27T18:00:56.750

5 Will these table legs support this table? 2015-11-05T16:25:16.973

5 Joining an irregular, detachable modesty panel together and to an irregular shaped desk 2016-02-01T17:04:49.280

5 Supporting a level box on an uneven surface 2016-03-09T14:51:01.870

5 How to bind wooden pieces together, but detachable 2016-04-08T17:52:25.427

5 How do I stop the table I built from wobbling/shaking side to side? 2016-12-25T16:26:09.057

5 2x4's are not really 2x4. How does this affect the integrity of a structure? 2017-02-23T16:35:19.333

5 Should I build basement shelving so it's square with the wall or with the floor? 2018-01-11T15:40:37.293

4 How do I make a wooden garter/captive washer? 2015-04-23T13:36:35.540

4 Good way to illustrate project / make a template of my small wood phone dock project? (CAD)? 2015-09-19T22:18:27.663

4 Design considerations for a machinist's work bench 2015-10-06T01:59:03.977

4 What material is suitable for a children's desk/furniture? 2015-10-19T18:20:46.583

4 Is making a breadboard table top using just pocket joinery asking for future problems? 2016-04-10T21:10:53.603

4 Folding table issue 2016-05-10T09:41:46.187

4 Use 3/4" wood for Adirondack chair? 2016-06-07T14:40:48.043

4 How to attach a one inch thick table top to two A shaped frames that are two inches thick 2016-10-06T20:56:14.607

4 Can I use half-lap joint for table breadboard? 2016-10-09T02:32:09.177

4 Building a simple table base with these materials? 2016-10-20T15:03:05.330

4 Is kiln dried jack pine suitable for a kitchen table? 2017-01-04T04:53:17.843

4 How to make large table less springy in the middle 2017-01-29T18:40:06.347

4 How thin can a large dovetail tail be? 2017-03-28T16:40:54.550

4 How to add bookshelf to a desk without doing any permanent damage? 2017-09-05T19:53:58.487

3 Design for wall-hanging knife holder 2015-10-11T15:18:07.667

3 self leveling compound for my box 2016-02-04T20:36:25.487

3 Strength of 1 1/2" by 1 1/2" Douglas fir 2016-02-20T00:10:16.827

3 Structural engineering with wood: determining post size, span, etc, for a timber frame house 2016-02-21T11:55:07.817

3 Why do the plans for this bench require a side panel oriented on an angle from a larger piece of wood? 2016-04-30T12:06:28.520

3 Wobbly table - maybe an easy fix 2016-05-12T12:58:52.247

3 What is a "shadow line" 2016-08-27T14:02:11.237

3 Wooden covering of a well 2016-09-12T21:00:15.477

3 Waterproof sign frame 2016-10-27T01:35:00.453

3 How do I use dividers to layout decorative shapes? 2016-12-03T05:23:23.167

3 Looking for non-threaded inserts 2017-01-12T05:48:30.257

3 When do I need to support the center of a horizontal, load-bearing board? 2017-08-23T22:47:52.927

3 How can I figure out how much weight this span could support? 2017-12-28T01:11:58.513

3 What are the best ways to glue thin edges? 2018-02-02T18:09:21.887

3 What is the minimal spacing between edge of leg pommel and mortise and tenon apron (intersected by tusk tenon) 2018-03-06T05:28:29.607

2 What length screw should I use for a computer desk 2016-07-25T17:12:30.217

2 Load Bearing of Legs and Wood Movement on TV Console 2016-08-31T16:41:15.207

2 Would threaded rod with a coupling nut suffice as a stretcher? 2016-10-19T18:46:21.327

2 Ideas for converting dining table to adjustable height coffee table 2016-11-30T18:58:41.073

2 Choices of contrasting wood for laminated table mat 2016-12-16T14:13:10.590

2 Trim / Casing and Baseboard choices between rooms 2017-09-10T12:53:46.677

2 Questions around designing and building an indoor climbing frame 2017-10-25T13:46:30.953

2 Adding Stacked Cabinets to Existing Frameless Cabinets 2017-11-02T12:29:41.757

2 Which wood dimensions can bear X kilos at Y meters long? 2018-02-02T23:55:11.590

1 Where should the trademark be placed on a baseball bat? 2016-03-07T17:23:55.957

1 Is there nothing that can't be made from wood? (Can you top this?) 2016-04-01T13:24:41.047

1 Is this bunk bed design feasible? 2016-07-08T20:27:35.780

1 How to assemble gear system for adjustable table? 2016-09-23T18:28:23.610

1 Thin, Flat Sheet - Plywood, Masonite, or MDF? 2016-11-26T16:06:06.007

1 how to design and install full length (floor-to-ceiling) built in bookcase? 2017-02-24T16:33:24.250

1 Farmer Table Legs 2017-03-06T22:07:55.810

1 Looking for help to design my own board game 2017-03-26T11:43:38.353

1 How to paint a piece of wood with spray 2017-04-08T12:33:54.713

1 Joining Thin Angled Wood 2017-04-11T00:13:11.677

1 Adding an angled back to a bench 2017-04-30T15:36:49.283

1 Canopy bed frame design supporting a suspended adult? 2017-10-26T10:12:16.353

1 Embedding/Inlaying a gem into wood 2017-12-20T16:19:04.790

1 Building a kitchen table to hold a fishtank 2018-01-04T13:49:58.337

1 Copycat furniture legs 2018-01-17T15:20:10.987

0 Can I put wheels on a bunk bed? 2016-02-11T20:25:43.470

-1 Making a stone sieve out of wood 2016-06-20T22:47:22.717