Tag: cutting

26 What is the recommended height of the blade on a table saw while operating? 2015-04-20T19:16:28.620

17 Is working with MDF going to kill me? 2016-03-02T14:20:15.143

12 How to make a long shallow cut on a narrow piece of wood with a circular saw 2015-03-19T03:26:17.420

10 How can I cut plywood in a straight line on a smaller table saw freehand? 2015-05-13T19:43:49.770

10 Tungsten Carbide grades 2016-04-11T23:59:46.740

10 How can I make precise corner or notch cuts on the edge of a board? 2016-07-12T05:11:07.847

9 Should I do many shallow quick cuts or a single deep slow one with my router? 2015-04-28T20:03:00.297

9 Turning a railroad tie into a bench, how to make a cut? 2015-07-10T17:54:28.830

9 Is it better to let the tool run or stop in-between cuts? 2016-02-07T22:58:40.880

9 Hitachi electric miter saw leaves a strange, slightly undulating non-square edge 2016-10-10T05:02:13.413

8 How do I cut thick wood with a jigsaw? 2015-06-18T00:36:02.040

8 cutting board turned green! 2015-07-04T03:32:47.287

8 Cutting a wooden box into 2 pieces, with special shape 2015-08-02T15:03:22.617

8 What techniques are there to find the optimal wood cutting list for a project? 2016-01-18T22:10:02.363

8 How do I cut a hole into a cutting board for a handle 2016-04-02T12:42:11.167

7 What's the best way to neatly cut a wooden cube in half, removing little material? 2015-12-13T15:32:18.947

6 Build a grid out of vertical, thin wood bars 2015-12-20T20:42:37.727

6 How should I cut a sheet of plywood for easy re-joining? 2016-02-06T09:04:11.803

6 Does having more teeth on a saw blade help it last longer? 2016-04-16T22:00:39.593

6 Pocket hole tearout 2017-05-03T02:46:10.333

5 How to cut an opening and door out of 3/4" Plywood 2015-09-18T04:57:20.083

5 What is an accurate and safe way to piece together wood with a rhombus cross section? 2015-10-03T12:26:03.210

5 Accurately cutting large (4x8) stock to size 2015-11-26T04:16:24.743

5 How to cut round corners on a 4x4? 2016-12-29T14:23:49.777

5 How to cut and join "wedges" of plywood to form a perfect circle 2017-02-28T16:07:10.453

4 Do wood cuts matter for wands? 2015-06-11T00:49:19.287

4 Hose converter between Dewalt Saw and Shop Vac 2016-05-16T13:09:54.487

4 How can I cut veneer with a hand saw and not chip it? 2016-05-19T20:02:07.197

4 How to remove a smaller cube from the end of a wooden beam 2016-06-04T10:01:42.467

4 What are the precautions to take when working with Desert Ironwood 2016-07-07T17:16:56.997

4 How to cut down bifurcated trees on a slope 2016-07-24T17:49:39.243

4 Safest way to cut very small blocks 2016-08-09T17:09:05.417

4 Easiest way to make 5000 cuts'? 2016-08-14T00:40:40.743

4 Should I resaw before or after gluing up thin panels? 2017-01-23T21:00:21.297

4 How do I prevent my table saw fence from deflecting? 2017-08-08T19:24:11.817

3 How can I improve my strategy for flush trimming with a router? 2016-04-04T13:35:36.517

3 Choosing a saber saw for long blades (12" and 18"). What does the maximum length specified in a saw depend on? 2016-08-22T21:11:25.093

3 Splitting wood even though grain is arced 2016-09-23T15:54:57.590

3 Make one end of a board thicker than the other? 2016-12-07T15:12:10.533

3 Why do (electric) routers spin so fast? 2017-01-12T02:54:20.243

3 How to cut a wood plank to make kumiko ramrods? 2017-03-06T20:30:11.297

2 Best way to make cross section pieces out of 12"-18" diameter log 2016-12-16T01:55:25.667

2 Does anyone use diamond files to touch up/sharpen circular saw blades? 2017-04-30T16:59:33.153

1 cutting a circle wider on top than the bottom 2016-04-03T17:50:31.370

1 Table saw bogging down, bad 2017-02-11T04:44:13.550

1 Making layered thin stock (complex shape) flush? 2017-05-16T02:27:31.527

1 Quality Band Saw Blades 2017-12-06T22:14:45.043

0 Unwanted change of depth of cut 2016-07-22T22:33:45.960

0 Cutting dressed pine to make it narrower 2017-01-10T12:37:11.100

0 Cutting Paulownia wood with a jigsaw 2017-07-15T19:07:04.767