Absolute magnitude

Absolute magnitude is a measure of the luminosity of a celestial object, on a logarithmic astronomical magnitude scale. An object's absolute magnitude is defined to be equal to the apparent magnitude that the object would have if it were viewed from a distance of exactly 10 parsecs (32.6 light-years), with no extinction (or dimming) of its light due to absorption by interstellar dust particles. By hypothetically placing all objects at a standard reference distance from the observer, their luminosities can be directly compared on a magnitude scale. As with all astronomical magnitudes, the absolute magnitude can be specified for different wavelength ranges corresponding to specified filter bands or passbands; for stars a commonly quoted absolute magnitude is the absolute visual magnitude, which uses the visual (V) band of the spectrum (in the UBV photometric system). Absolute magnitudes are denoted by a capital M, with a subscript representing the filter band used for measurement, such as MV for absolute magnitude in the V band.

The more luminous an object, the smaller the numerical value of its absolute magnitude. A difference of 5 magnitudes between the absolute magnitudes of two objects corresponds to a ratio of 100 in their luminosities, and a difference of n magnitudes in absolute magnitude corresponds to a luminosity ratio of 100(n/5). For example, a star of absolute magnitude MV=3 would be 100 times more luminous than a star of absolute magnitude MV=8 as measured in the V filter band. The Sun has absolute magnitude MV=+4.83.[1] Highly luminous objects can have negative absolute magnitudes: for example, the Milky Way galaxy has an absolute B magnitude of about −20.8.[2]

An object's absolute bolometric magnitude represents its total luminosity over all wavelengths, rather than in a single filter band, as expressed on a logarithmic magnitude scale. To convert from an absolute magnitude in a specific filter band to absolute bolometric magnitude, a bolometric correction is applied.

For Solar System bodies that shine in reflected light, a different definition of absolute magnitude (H) is used, based on a standard reference distance of one astronomical unit.

Stars and galaxies (M)

In stellar and galactic astronomy, the standard distance is 10 parsecs (about 32.616 light-years, 308.57 petameters or 308.57 trillion kilometres). A star at 10 parsecs has a parallax of 0.1″ (100 milliarcseconds). Galaxies (and other extended objects) are much larger than 10 parsecs, their light is radiated over an extended patch of sky, and their overall brightness cannot be directly observed from relatively short distances, but the same convention is used. A galaxy's magnitude is defined by measuring all the light radiated over the entire object, treating that integrated brightness as the brightness of a single point-like or star-like source, and computing the magnitude of that point-like source as it would appear if observed at the standard 10 parsecs distance. Consequently, the absolute magnitude of any object equals the apparent magnitude it would have if it were 10 parsecs away.

The measurement of absolute magnitude is made with an instrument called a bolometer. When using an absolute magnitude, one must specify the type of electromagnetic radiation being measured. When referring to total energy output, the proper term is bolometric magnitude. The bolometric magnitude usually is computed from the visual magnitude plus a bolometric correction, Mbol = MV + BC. This correction is needed because very hot stars radiate mostly ultraviolet radiation, whereas very cool stars radiate mostly infrared radiation (see Planck's law).

Some stars visible to the naked eye have such a low absolute magnitude that they would appear bright enough to outshine the planets and cast shadows if they were at 10 parsecs from the Earth. Examples include Rigel (−7.0), Deneb (−7.2), Naos (−6.0), and Betelgeuse (−5.6). For comparison, Sirius has an absolute magnitude of 1.4, which is brighter than the Sun, whose absolute visual magnitude is 4.83 (it actually serves as a reference point). The Sun's absolute bolometric magnitude is set arbitrarily, usually at 4.75.[3][4] Absolute magnitudes of stars generally range from −10 to +17. The absolute magnitudes of galaxies can be much lower (brighter). For example, the giant elliptical galaxy M87 has an absolute magnitude of −22 (i.e. as bright as about 60,000 stars of magnitude −10).

Apparent magnitude

The Greek astronomer Hipparchus established a numerical scale to describe the brightness of each star appearing in the sky. The brightest stars in the sky were assigned an apparent magnitude m = 1, and the dimmest stars visible to the naked eye are assigned m = 6.[5] The difference between them corresponds to a factor of 100 in brightness. For objects within the immediate neighborhood of the Sun, the absolute magnitude M and apparent magnitude m from any distance d (in parsecs) is related by:

where F is the radiant flux measured at distance d (in parsecs), F10 the radiant flux measured at distance 10 pc. The relation can be written in terms of logarithm:

where the insignificance of extinction by gas and dust is assumed. Typical extinction rates within the galaxy are 1 to 2 magnitudes per kiloparsec, when dark clouds are taken into account.[6]

For objects at very large distances (outside the Milky Way) the luminosity distance dL must be used instead of d (in parsecs), because the Euclidean approximation is invalid for distant objects and general relativity must be taken into account. Moreover, the cosmological redshift complicates the relation between absolute and apparent magnitude, because the radiation observed was shifted into the red range of the spectrum. To compare the magnitudes of very distant objects with those of local objects, a K correction might have to be applied to the magnitudes of the distant objects.

The absolute magnitude M can also be approximated using apparent magnitude m and stellar parallax p:

or using apparent magnitude m and distance modulus μ:



Rigel has a visual magnitude mV of 0.12 and distance about 860 light-years

Vega has a parallax p of 0.129″, and an apparent magnitude mV of 0.03

Alpha Centauri A has a parallax p of 0.742″ and an apparent magnitude mV of −0.01

The Black Eye Galaxy has a visual magnitude mV of 9.36 and a distance modulus μ of 31.06

Bolometric magnitude

The bolometric magnitude Mbol, takes into account electromagnetic radiation at all wavelengths. It includes those unobserved due to instrumental pass-band, the Earth's atmospheric absorption, and extinction by interstellar dust. It is defined based on the luminosity of the stars. In the case of stars with few observations, it must be computed assuming an effective temperature.

Classically, the difference in bolometric magnitude is related to the luminosity ratio according to:

which makes by inversion:


L is the Sun's luminosity (bolometric luminosity)
L is the star's luminosity (bolometric luminosity)
Mbol, is the bolometric magnitude of the Sun
Mbol,★ is the bolometric magnitude of the star.

In August 2015, the International Astronomical Union passed Resolution B2[7] defining the zero points of the absolute and apparent bolometric magnitude scales in SI units for power (watts) and irradiance (W/m2), respectively. Although bolometric magnitudes had been used by astronomers for many decades, there had been systematic differences in the absolute magnitude-luminosity scales presented in various astronomical references, and no international standardization. This led to systematic differences in bolometric corrections scales.[8] Combined with incorrect assumed absolute bolometric magnitudes for the Sun could lead to systematic errors in estimated stellar luminosities (and stellar properties calculated which rely on stellar luminosity, such as radii, ages, and so on).

Resolution B2 defines an absolute bolometric magnitude scale where Mbol = 0 corresponds to luminosity L0 = 3.0128×1028 W, with the zero point luminosity L0 set such that the Sun (with nominal luminosity 3.828×1026 W) corresponds to absolute bolometric magnitude Mbol, = 4.74. Placing a radiation source (e.g. star) at the standard distance of 10 parsecs, it follows that the zero point of the apparent bolometric magnitude scale mbol = 0 corresponds to irradiance f0 = 2.518021002×10−8 W/m2. Using the IAU 2015 scale, the nominal total solar irradiance ("solar constant") measured at 1 astronomical unit (1361 W/m2) corresponds to an apparent bolometric magnitude of the Sun of mbol, = −26.832.[8]

Following Resolution B2, the relation between a star's absolute bolometric magnitude and its luminosity is no longer directly tied to the Sun's (variable) luminosity:


L is the star's luminosity (bolometric luminosity) in watts
L0 is the zero point luminosity 3.0128×1028 W
Mbol is the bolometric magnitude of the star

The new IAU absolute magnitude scale permanently disconnects the scale from the variable Sun. However, on this SI power scale, the nominal solar luminosity corresponds closely to Mbol = 4.74, a value that was commonly adopted by astronomers before the 2015 IAU resolution.[8]

The luminosity of the star in watts can be calculated as a function of its absolute bolometric magnitude Mbol as:

using the variables as defined previously.

Solar System bodies (Mv or H )

For planets and asteroids a definition of absolute magnitude that is more meaningful for non-stellar objects is used. The absolute magnitude for a planet, Mv, or an asteroid, H, is defined as the apparent magnitude that the object would have if it were one astronomical unit (AU) from both the Sun and the observer, and in conditions of ideal solar opposition. In fact, one has to take into account that Solar System bodies are illuminated by the Sun, therefore the magnitude varies as a function of illumination conditions, described by the phase angle. This relationship is referred to as the phase curve. The absolute magnitude is defined for the ideal case of phase angle equal to zero.

Planet Mv [9]
Mercury -0.613
Venus -4.384
Earth -3.99
Mars -1.601
Jupiter -9.395
Saturn -8.914
Uranus -7.110
Neptune -7.00

To convert a stellar or a galactic absolute magnitude into a planetary one, subtract 31.57. A comet's nuclear magnitude (M2) is a different scale and can not be used for a size comparison with an asteroid's (H) magnitude.

Apparent magnitude

Diffuse reflection on sphere and flat disk

The absolute magnitude (H) can be used to help calculate the apparent magnitude of a body under different conditions.

where d0 is 1 AU, χ is the phase angle, the angle between the body-Sun and body–observer lines. By the law of cosines, we have:

p(χ) is the phase integral (integration of reflected light; a number in the 0 to 1 range).

Example: Ideal diffuse reflecting sphere. A reasonable first approximation for planetary bodies

A full-phase diffuse sphere reflects 2/3 as much light as a diffuse disc of the same diameter.


  • dBO is the distance between the observer and the body
  • dBS is the distance between the Sun and the body
  • dOS is the distance between the observer and the Sun

Note: because Solar System bodies are never perfect diffuse reflectors, astronomers use empirically derived relationships to predict apparent magnitudes when accuracy is required.[10]



  • HMoon = +0.25
  • dOS = dBS = 1 AU
  • dBO = 3.845×108 m = 0.00257 AU

How bright is the Moon from Earth?

  • Full moon: χ = 0, p(χ) ≈ 2/3
    Actual value: −12.7. A full Moon reflects 30% more light than a perfect diffuse reflector predicts.
  • Quarter moon: χ = 90° = π/2, p(χ) ≈ 2/ (if diffuse reflector)
    Actual value: approximately −11. The diffuse reflector formula does well for smaller phases.


For a meteor, the standard distance for measurement of magnitudes is at an altitude of 100 km (62 mi) at the observer's zenith.[11][12]

See also

  • Photographic magnitude
  • Hertzsprung–Russell diagram – relates absolute magnitude or luminosity versus spectral color or surface temperature.
  • Jansky radio astronomer's preferred unit – linear in power/unit area
  • Surface brightness – the magnitude for extended objects
  • List of most luminous stars


  1. "Sun Fact Sheet". NASA Goddard Space Flight Center. Retrieved 25 February 2017.
  2. Karachentsev, I. D.; et al. (2004). "A Catalog of Neighboring Galaxies". The Astronomical Journal. 127: 2031–2068. Bibcode:2004AJ....127.2031K. doi:10.1086/382905. Retrieved 27 February 2017.
  3. Cayrel de Strobel, G. (1996). "Stars resembling the Sun". Astronomy and Astrophysics Review. 7 (3): 243–288. Bibcode:1996A&ARv...7..243C. doi:10.1007/s001590050006.
  4. Casagrande, L.; Portinari, L.; Flynn, C. (November 2006). "Accurate fundamental parameters for lower main-sequence stars". MNRAS (Abstract). 373 (1): 13–44. arXiv:astro-ph/0608504. Bibcode:2006MNRAS.373...13C. doi:10.1111/j.1365-2966.2006.10999.x.
  5. Carroll, Bradley W.; Ostlie, Dale A. An Introduction to Modern Astrophysics (2nd ed.). Pearson. p. 60. ISBN 0-321-44284-9.
  6. Unsöld, Albrecht; Baschek, Bodo (2013), The New Cosmos: An Introduction to Astronomy and Astrophysics (5th ed.), Springer Science & Business Media, p. 331, ISBN 3662043564
  7. "IAU XXIX General Assembly Draft Resolutions Announced". Retrieved 2015-07-08.
  8. 1 2 3 IAU Inter-Division A-G Working Group on Nominal Units for Stellar & Planetary Astronomy (13 August 2015). "IAU 2015 Resolution B2 on Recommended Zero Points for the Absolute and Apparent Bolometric Magnitude Scales" (PDF). Resolutions adopted at the General Assemblies. International Astronomical Union. arXiv:1510.06262. Bibcode:2015arXiv151006262M.
  9. Mallama, Anthony; Hilton, James L. (October 2018). "Computing apparent planetary magnitudes for The Astronomical Almanac". Astronomy and Computing. 25: 10–24. Bibcode:2018A&C....25...10M. doi:10.1016/j.ascom.2018.08.002.
  10. "Planetary magnitudes Calculator – update". Archived from the original on April 19, 2012. Retrieved 2013-05-16.
  11. "Glossary – Absolute magnitude of meteors". International Meteor Organization. Retrieved 2013-05-16.
  12. "Solar System Dynamics Glossary – Absolute magnitude of Solar System bodies". NASA Jet Propulsion Laboratory. Retrieved 2013-05-16.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.