# Slugging percentage

In baseball statistics, **slugging percentage** (**SLG**) is a measure of the batting productivity of a hitter. It is calculated as total bases divided by at bats, through the following formula, where *AB* is the number of at bats for a given player, and *1B*, *2B*, *3B*, and *HR* are the number of singles, doubles, triples, and home runs, respectively:

Unlike batting average, slugging percentage gives more weight to extra-base hits such as doubles and home runs, relative to singles. Walks are specifically excluded from this calculation, as a plate appearance that ends in a walk is not counted as an at bat.

The name is a misnomer, as the statistic is not a percentage but a scale of measure whose computed value is a number from 0 to 4. The statistic gives a double twice the value of a single, a triple three times the value, and a homerun four times.^{[2]}

A slugging percentage is always expressed as a decimal to three decimal places, and is generally spoken as if multiplied by 1000. For example, a slugging percentage of .589 would be spoken as "five eighty nine."

In 2016, the mean average SLG among all batters in Major League Baseball was .417.^{[3]}

## Example calculation

For example, in 1920, Babe Ruth played his first season for the New York Yankees. In 458 at bats, Ruth had 172 hits, comprising 73 singles, 36 doubles, 9 triples, and 54 home runs, which brings the total base count to (73 × 1) + (36 × 2) + (9 × 3) + (54 × 4) = 388. His total number of bases (388) divided by his total at-bats (458) is .847 which constitutes his slugging percentage for the season. This also set a record for Ruth which stood until 2001 when Barry Bonds achieved 411 bases in 476 at-bats bringing his slugging percentage to .863, which has been unmatched since.^{[4]}

## Significance

Long after it was first invented, slugging percentage gained new significance when baseball analysts realized that it combined with on-base percentage (OBP) to form a very good measure of a player's overall offensive production (in fact, OBP + SLG was originally referred to as "production" by baseball writer and statistician Bill James). A predecessor metric was developed by Branch Rickey in 1954. Rickey, in *Life* magazine, suggested that combining OBP with what he called "extra base power" (EBP) would give a better indicator of player performance than typical Triple Crown stats. EBP was a predecessor to slugging percentage.^{[5]}

Allen Barra and George Ignatin were early adopters in combining the two modern-day statistics, multiplying them together to form what is now known as "SLOB" (Slugging × On-Base).^{[6]} Bill James applied this principle to his runs created formula several years later (and perhaps independently), essentially multiplying SLOB × At-Bats to create the formula:

In 1984, Pete Palmer and John Thorn developed perhaps the most widespread means of combining slugging and on-base percentage: On-base plus slugging (OPS), which is a simple addition of the two values. Because it is easy to calculate, OPS has been used with increased frequency in recent years as a shorthand form to evaluate contributions as a batter.

In a 2015 article, Bryan Grosnick made the point that "on base" and "slugging" may not be comparable enough to be simply added together. "On base" has a theoretical maximum of 1.000 whereas "slugging" has a theoretical maximum of 4.000. The actual numbers don't show as big a difference of course, with Grosnick listing .350 as a good "on base" and .430 as a good "slugging." He goes on to say that OPS has the advantages of simplicity and availability and further states, "you'll probably get it 75% right, at least."^{[7]}

## Perfect slugging percentage

The maximum numerically possible slugging percentage is 4.000.^{[2]} A number of MLB players (117 through the end of the 2016 season) have momentarily had a 4.000 career slugging percentage by homering in their first major league at-bat. Hundreds of other players have momentarily held a 4.000 percentage for a season by hitting a home run in their first at-bat of the season.

No player has ever retired with a 4.000 slugging percentage, but four players tripled in their only MLB at-bat and therefore share the record of a career slugging percentage of 3.000 (when evaluated without regard to a minimum number of games played or plate appearances). The players are Eric Cammack (2000 Mets), Scott Munninghoff (1980 Phillies), Eduardo Rodríguez (1973 Brewers), and Charlie Lindstrom (1958 White Sox).^{[8]}

## See also

## References

- ↑ "Career Leaders & Records for Slugging %". Baseball Reference. Retrieved 2014-02-27.
- 1 2 Baseball Scorekeeping: A Practical Guide to the Rules, Andres Wirkmaa, Jefferson, North Carolina, London: McFarland & Company, Inc., Publishers, 2003.
- ↑ "Major League Total Stats » 2016 » Batters » Dashboard | FanGraphs Baseball".
*www.fangraphs.com*. Retrieved 2017-04-30. - ↑ "Single-Season Leaders & Records for Slugging %". Baseball Reference. Retrieved 2016-12-10.
- ↑ Lewis, Dan (2001-03-31). "Lies, Damn Lies, and RBIs". nationalreview.com. Archived from the original on 2012-10-20. Retrieved 2012-07-01.
- ↑ Barra, Allen (2001-06-20). "The best season ever?". Salon.com. Retrieved 2007-07-15.
- ↑ Separate but not quite equal: Why OPS is a "bad" statistic, Bryan Grosnick, Beyond the Box Score, Sept. 18, 2015.
- ↑ Spector, Jesse (2010-05-29). "Ex-Met Eric Cammack is one of only four players to post career slugging percentage of 3.000".
*Daily News*. New York.