SAT>IP (or Sat-IP) specifies a IP-based Client-Server communication protocol for a TV gateway in which SAT>IP servers, connected to one or more DVB broadcast sources, send the program selected and requested by an SAT>IP client over an IP based local area network in either unicast for the one requesting client or multicast in one datastream for several SAT>IP clients.
While the system, originating from the DBS satellite operator SES, is originally geared towards receiving and distributing satellite broadcasts in DVB-S or DVB-S2 encoding, SAT>IP also specifies formats for the SAT>IP client request to specify programs broadcast via DVB-C:AppendixD and DVB-T.:AppendixC
Only the SAT>IP servers need tuning hardware and software specific to the DVB-broadcast system(s) being used; SAT>IP clients can be any IP-enabled client multimedia device – Tablets, PCs, laptops, Smartphones, “connected” TVs, video game consoles, media players or others.
The main difference of SAT>IP to other IP-based multi-media distribution systems such as IP-TV and DLNA is that the SAT>IP client does not select a program from a server specific list, but has to specify the DVB reception parameters such as the signal source (typically the satellite number in a DiSEqC switch), frequency, polarisation, Modulation system and type, the wanted PIDs and others.:Chap.3.5.10 The SAT>IP client would rely for this on a Extended M3U Channel list.:p.60,62
SES unveiled and demonstrated SAT>IP at the fifth annual SES Industry Days conference showing the distribution of satellite programmes over CAT5 Ethernet, Power Line, plastic optical fibre and WiFi networks. The first devices implementing the SAT>IP protocol became available in 2012.
SAT>IP is particularly aimed at satellite TV distribution in the home but can be applied to large multi-dwelling and hospitality reception systems too.
Conventional satellite TV reception systems convert the received transmissions to an intermediate frequency (IF) for distribution via dedicated coaxial cables to one or more satellite tuners and demodulators in set-top boxes. SAT>IP allows the satellite TV distribution to share a data network and enables display and viewing of the signals on any multimedia IP device equipped with suitable software. Multiple SAT>IP servers and clients can operate on the same network with both free-to-air and encrypted pay-TV transmissions.
The intention of the SAT>IP Project is to make SAT>IP an international standard that can be widely implemented worldwide and compatible across manufacturers and operators.
The SAT>IP protocol was developed jointly by the SAT>IP Project partners, satellite operator SES, UK broadcaster BSkyB, and Danish TV software company Craftwork. Prototype SAT>IP equipment and the first certified SAT>IP converter was developed by Inverto Digital Labs, a Luxembourg-based Set Top Box and software designer. SAT>IP is a license free technology available to all manufacturers.
In April 2015, at the Las Vegas NAB Show, six satellite operators and equipment manufacturers announced the formation of the SAT>IP Alliance, a coalition to develop compatible hardware and software for SAT>IP technology. At this time, the SAT>IP Alliance founding members were SES, Hispasat, Panasonic, Nagra, ALi Corporation, and MaxLinear.
In September 2015, Eutelsat joined the SAT>IP Alliance as a founder member and the third satellite operator. In May 2017 Irdeto and Verimatrix joined. As of September 2017, the SAT>IP Alliance members are:
In September 2017, the DVB consortium of broadcasters, manufacturers, network operators, software developers, and regulators announced an agreement with the SAT>IP Alliance on the future development of the SAT>IP specification and that future promotion of the technology will be conducted jointly, allowing the overall DVB community to contribute to SAT>IP features and services.
The SAT>IP server removes the RF tuner and demodulator from the client device, providing their functions as a common resource of the IP network. The server will typically contain two or more tuners to serve several clients with different channels simultaneously. It converts the satellite TV signals to IP in their broadcast quality, transparently without any transcoding, effectively removing the DVB-S/S2 layer and replacing it with an IP transport layer.
This process can happen in a master STB (even as an addition to conventional receiver operation), in a distribution device analogous to an IF multiswitch positioned close to the antenna, or even at the antenna itself in the LNB (an IP-LNB).
Converted to IP, the satellite TV signals can be distributed over any IP network, depending on the configuration of the server, using wired Ethernet, wireless (WLAN, 4G), “Power Line” home networks, optical fibre, plastic fibre, coax, twisted pair (xDSL) or visible light technologies. The SAT>IP protocol is independent of manufacturers and was developed to enable SAT>IP client devices to communicate with SAT>IP servers.
In the control plane, clients request access to satellites, transponders and MPEG streams using RTSP or HTTP. Only those transport stream packages needed for the TV transmission requested are carried over the IP network.
The full protocol description (v1.2.2) is public available at SAT>IP Protocol.
Encrypted pay-TV transmission
The SAT>IP protocol doesn't provide any specific support for encrypted services. The specification only targets the tuner, and how to access to DVB streams over the network. So if the client wants access to encrypted feeds, it needs to have the correct support for them. This is easy when the client is a device with CAS/CAM hardware support (like a television or set-top-box), but it's unclear how to do it in a PC, mobile or tablet.
Two categories of SAT>IP products exist: SAT>IP clients and servers.
Software applications to use computers and display devices as SAT>IP clients have been produced by a number of companies.
DVBViewer Pro is a digital TV viewer and recorder software application for Windows PCs which has been extended to use SAT>IP. The SAT>IP Viewer Android app is available and DVBViewer also produces an Android app for SAT>IP dish alignment, combining a dish angle calculator and signal strength/quality meter.
Elgato Systems produces an app for Android tablets and phones, and an iOS app for iPad and iPhone as a SAT>IP client.
- Tara Systems
The Inaris SAT>IP viewer is available as an app for both Android and iOS devices.
The tvizen SAT>IP app is available free of charge for Android devices.
The first certified SAT>IP equipment to be produced for commercial sale was the IDL400S Multibox server from Inverto. The Linux-based Multibox can tune to four satellite signals and stream selected TV/Radio programs to four users' tablets, smart phones, smart TVs, game consoles or connected video devices over a wired and/or wireless home network.
Clients supported by IDL400S Multibox includes iOS and Android Tablets and Smart phones, UPnP/DLNA compliant connected media players and video streamers (e.g. Xtreamer, Boxee), UPnP/DLNA compliant Smart TVs (e.g. Sony, Samsung, Loewe, Philips, LG), PC client (Windows Media Player, VLC player, TVersity, XBMC or Boxee), Connected game consoles, Proprietary Inverto clients (Volksbox Essential, Volksbox 2, Volksbox Movie) and others SAT>IP compliant Clients.
The Zinwell ZIM-1800 SAT>IP switch/server is the second to be certified to the new standard. The ZIM-1800 offers an opportunity for portable and IP device users to watch rich satellite programmes on their favourite devices, such as iPads, iPhones, Android tablets, smartphones, laptops, smart TVs or any networking devices. The installation and distribution cost can also be significantly reduced by using the Multicast and Unicast features in SMATV systems in hotels and flats.
- Digital Devices:
Minisatip is an open source software implementing a SAT>IP server application that runs under Linux. It was tested with DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-C, DVB-C2, ATSC DVB cards.
SatPI is an open source project that implements a SAT>IP server application that runs under Linux. It currently supports DVB-S/S2/T/C cards.
IP-LNB active head for satellite dish
In April 2013, SES announced the development by Inverto, Abilis and MaxLinear Inc of a prototype SAT>IP LNB (IP-LNB), which was demonstrated at a conference held at SES' headquarters in Luxembourg. The IP-LNB incorporates eight-channel satellite-to-IP bridging technology to deliver eight concurrent channels via IP unicast or multicast to fixed and portable client devices. By combining satellite reception and IP bridging at the dish, the IP-LNB enables satellite content distribution to the home over a single Ethernet cable, which carries both the IP TV and power for the LNB through Power over Ethernet (PoE) technology, reducing the overall system cost and power consumption. As of July 2012, the prototype IP-LNB was being developed into a commercial product.
In September 2013 at the International Broadcasting Convention in Amsterdam, SES demonstrated a prototype IP-LNB, that is a SAT>IP server integrated into an LNB that can deliver eight concurrent HD channels via IP unicast or multicast from its Ethernet output. In June 2015, Triax launched its IP-LNB, providing 8 channels in SAT>IP protocol on a single Ethernet cable, powered over that same cable through Power over Ethernet (PoE) technology.
In May 2015, Korean company I DO IT produced the first flat plate antenna with a built-in SAT>IP server. The Selfsat>IP antenna is 566x300mm in size and includes two conventional LNB outputs and an Ethernet output to stream 8 different satellite channels around a home network.
- Digital Devices
- DVB Logic
- Global Invacom
- Grundig SAT Systems
- HyperPanel Lab
- Nagra Kudelski
- Pyras Technology
- Red Bee Media
- ST Microelectronics
- Tara Systems
- Triax Group
- Unitron Group
- Wistron Netweb Group
- "SAT>IP Protocol Specification - Version 1.2.2" (PDF). satip.info. 2015-01-08. Retrieved 15 January 2018.
- "Sat-IP: Physical layer independent satellite distribution to IP devices" (PDF). Company White Paper. SES. March 2012. Retrieved July 12, 2012.
- "Resources | SAT IP Channel Lists". satip.info. Retrieved 17 January 2018.
- CENELEC committee CLC/TC 209 (Cable networks for television signals, sound signals and interactive services) (2015-03-24). "Communications protocol to transport satellite delivered signals over IP networks". cenelec.eu. Retrieved 17 January 2018.
This European Standard describes the SAT>IP communication protocol
- "DVB Forms Liaison with SAT>IP Alliance: New Liaison Paves Way for Further Development of SAT>IP Technology in DVB". satip.info. 2017-09-15. Retrieved 15 January 2018.
protocol is standardized as CENELEC EN50585
- A Home Base For Distribution Of Content. Satnews.com April 30, 2012
- "SES unveils IP-based in-home distribution of satellite TV signals" (Press release). SES. April 27, 2012. Retrieved April 30, 2012.
- "SES Announces Industry'S First SAT>IP Converter Certification" (Press release). SES. June 12, 2012. Retrieved July 24, 2012.
- SAT>IP website Accessed May 2, 2013
- MaxLinear Joins SES and HISPASAT as Founding Members of SAT>IP Alliance April 15, 2015 MaxLinear. Accessed July 3, 2016
- Eutelsat joins SAT-IP Alliance September 15, 2015 DTG. Accessed July 3, 2016
- Irdeto and Verimatrix join the SAT>IP Alliance Broadband TV News May 31, 2017. Accessed September 27, 2017
- SAT>IP Alliance homepage Accesssed September 27, 2017
- SAT>IP website April 15, 2015. Accessed July 3, 2016
- "DVB FORMS LIAISON WITH SAT>IP ALLIANCE - New Liaison Paves Way for Further Development of SAT>IP Technology in DVB" (PDF). dvb.org. 2017-09-15. Retrieved 15 January 2018.
As DVB takes over the management of the SAT>IP protocol, it is quite possible that the naming and scope of the technology will expand to better reflect support for all broadcast delivery systems.
- Elgato SAT>IP iOS App
- Inverto IDL400S Multibox product details
- Zinwell ZIM-1800 product details Archived 2013-02-25 at the Wayback Machine.
- Triax TSS400 product details Archived 2012-12-24 at the Wayback Machine.
- GSS DSI400 product details
- Schwaiger product details
- Telestar product details
- Blamkom SIA=108 product details
- DVB-C and DVB-T Sat-IP servers at Digital Devices
- "SES, Inverto, Abilis and MaxLinear revolutionise satellite TV home distribution with industry's first IP-LNB" (Press release). SES. April 22, 2013. Retrieved July 24, 2012.
- "SES SHOWCASES LIVE DEMO OF IP-LNB AT IBC 2013" (Press release). SES. September 12, 2013. Retrieved September 30, 2013.
- "Triax and Astra present new IP-LNB" (Press release). Triax. June 9, 2015. Retrieved September 30, 2015.
- "SELFSAT>IP, THE WORLD'S FIRST SAT>IP ANTENNA, GIVES MOBILE RECEPTION DEVICES FULL ACCESSIBILITY TO SATELLITE BROADCASTS" (Press release). SES. May 6, 2015. Retrieved September 30, 2015.
- SAT>IP website list of supporters Accessed November 1, 2015
- SAT>IP Website - Official SAT>IP website
- SAT>IP Resources: Protocol Specification, Logos & Compliance, Channel lists, Developer Resources, General Information
- SAT>IP Protocol - directly to SAT>IP Protocol Specification
- SAT>IP - SES SAT>IP page
- OnAstra - Official Astra consumers/viewers' site
- SES - Official SES trade/industry site
- BSkyB - Official BSkyB site
- Craftwork - Official Craftwork site
- Elgato - Elgato SAT>IP App at Google Play
- Inverto - Inverto (manufacturer) site
- Zinwell - Zinwell (manufacturer) site
- Johansson - Johansson (manufacturer) site