Tag: hardware

17 MAC address recycling? 2013-05-21T16:14:00.997

9 What is backpressure in the context of routers? 2013-05-16T22:43:30.597

8 What certifications are there for Fiber Optic termination and splicing? 2016-12-26T17:48:19.257

6 How to check if a NIC supports hardware timestamps 2015-10-14T13:02:35.093

6 What is the purpose of an Ethernet magnetic transformer, and how are they used? 2016-04-25T07:00:20.417

5 Is there a way to identify a Tri-Rate Copper SFP in a Juniper MX device 2014-09-19T09:06:09.550

5 Cumulus Linux and Whitebox switch hardware? 2015-06-02T00:38:27.107

5 How do hardware timestamps (hardstamps) work 2015-10-15T08:09:34.653

5 What happens at the hardware level of a router when a packet is received and eventually triggers a process like ARP? 2016-01-18T15:20:19.950

4 How is it possible to run VoIP on CAT3. Do you not need CAT5 for the voice data? 2015-06-08T20:05:19.357

4 Software Switches vs Hardware Switches 2017-01-07T16:58:56.560

3 Building a 3 port network tap (100mbps half-duplex) 2014-02-28T17:09:40.433

3 Can I Use Different Versions of CME and CUE 2014-07-16T20:35:05.620

3 DLink switch loses configuration on power off! 2015-07-23T14:25:14.983

3 Why does 10Gbps ethernet claim PAM16 encoding then use a squared DSQ128 constellation? 2017-06-22T13:11:13.057

3 Cisco 6500 chassis modules color edge 2018-02-28T01:17:07.983

3 Any reason to use hubs? 2018-03-30T03:31:30.273

2 Improving Network Flow Documentation in 3G->4G upgrade project 2013-05-27T00:36:43.177

2 Frost prevention for indoor router and cable modem 2014-09-24T07:27:30.930

2 Toggle Switch for an Ethernet Cable 2015-03-16T19:25:57.480

2 How to hard reset an Allied Telesis x510? 2016-07-10T07:33:58.853

2 Is it possible to design a network switch that could work only with combinational or sequential logic circuits without a software? 2016-11-27T00:20:22.910

2 How to determine if a port is physically(hardware) bad 2016-12-07T16:18:51.477

2 HP 5500 JD374A Port naming convention 2018-02-07T20:05:50.210

2 How to debug an unstable connection in a P2P configuration 2018-03-14T15:27:47.843

2 What advances in hardware allowed DPDK to increase performance on packet processing? 2018-03-24T07:55:48.547

2 Is temperature sensor on zero enough to prove PoE Control Module is failed? 2018-11-28T18:57:11.133

1 Line Sync when there is supposed to be no ADSL codes on the line? 2013-05-23T01:16:06.023

1 How do Wi-Fi access points discard frames on adjacent channels? 2014-09-01T08:52:29.620

1 HW State: DEAD - Cisco 3925 2015-02-09T00:17:56.480

1 Why does a sever's host automatically broadcast an ARP request after a server attempts to reply to a BOOTP request? 2015-05-18T18:37:53.147

1 Checklist for replacing failed ASA hardware 2015-08-02T15:31:30.080

1 How do i factory reset a Allied Telesyn AT-9924t? 2015-08-26T16:53:11.580

1 Switching vs Routing 2016-08-30T17:14:29.217

1 Cisco 3850 Model Naming Convention? 2017-03-28T18:52:38.987

0 How is a single physical packet of data kept together? 2015-07-12T14:37:51.913

0 Cisco 3925 not booting/outputing to console 2015-08-19T22:05:37.797

0 what's the meaning of this formula "cutoff frequency / (b/8)" 2015-09-02T04:17:49.913

0 How "show inventory" displays SX SFP? 2016-11-08T11:02:29.310

0 Is it possible to create a collaborative network? 2017-02-11T17:19:38.717

0 Hardware Implementation of Ports 2017-07-15T15:16:00.323

0 Is the auto-correlation of a frame transient based on the physical characteristics of a device? 2017-08-25T13:45:19.893

0 What are the major factors influencing the variance in time packets need to be transferred? 2018-09-24T16:09:55.817

0 Load-balancing one VPN-connection over multiple WANs 2018-09-28T17:03:14.503

0 SG500 powers on, but won't boot, won't reset 2018-10-23T00:51:17.973

0 Cisco router boot error 2018-10-23T06:21:28.573

-3 Hard drive array usage 2016-07-23T12:48:08.443