Tag: design

16 Are there any reasons to not use BFD? 2013-05-20T08:14:03.607

11 Trying to fit centralised firewall into network topology 2014-06-13T17:56:04.903

10 OSPF link cost design 2013-05-10T22:03:46.790

10 High-Density WiFi & 2.4GHz Co-channel Interference design 2013-09-21T00:21:01.580

10 VLAN assignment philosophy 2014-09-03T02:17:24.607

8 Remote Campus Routing Design 2013-05-25T00:13:28.277

8 What factors drive L2 vs L3 in the access layer? 2013-05-30T18:21:50.283

8 What certifications are there for Fiber Optic termination and splicing? 2016-12-26T17:48:19.257

7 Is there a better way to design a Out-of-Band Management Network? 2013-06-26T02:26:36.690

7 How to connect private users to applications within a trusted network without direct connection to the Server Switch 2014-04-21T01:45:23.133

6 Which is the Preferred location of an IPS within a network? 2013-05-22T19:28:20.150

6 Why is the design "intelligence on the edge" better for a computer network? 2015-05-12T12:29:07.583

6 Do i need to configure VLANS on my router/firewall or just the switch? 2017-09-04T18:36:36.373

5 Connecting a firewall cluster to other appliance cluster 2014-03-19T11:11:02.203

5 Where to put dedicated firewall for two departments separated by their own access switches and connected through a same distribution switch? 2014-04-13T06:13:47.910

5 Routing protocol for Large scale hub and spoke VPN 2014-07-08T15:56:38.327

5 Defining hierarchical BGP route-maps 2017-05-14T00:38:45.803

5 Should a Metropolitan Area Network (MAN) be setup with a router at each site? 2018-03-29T10:51:57.530

4 What are the reasons for choosing separate or combined VPN and Internet routers? 2013-05-29T20:39:13.337

4 Design question - branch offices with failover 2014-01-30T13:00:20.580

4 How to design IXP with redundancy? 2014-03-22T00:59:44.587

4 Network Design Improvement Advice 2014-04-05T14:28:25.773

4 Network hierarchy model - Situation to implement core layer 2014-04-11T02:31:09.757

4 OSPF Data Center Design 2014-04-11T12:37:02.503

4 Campus Area Network questions 2016-02-19T17:20:02.863

4 Is there benefit to iBGP peering between CEs in a BGP dual-homed design? 2016-04-16T21:27:01.370

4 Theoretical: Bottleneck in a switch stacking environment 2018-04-04T14:35:31.523

3 Question about design of a small/medium office network 2013-08-28T14:59:33.460

3 Improving design of a point-to-point layer on top of a byte-oriented protocol 2014-01-31T13:51:40.407

3 Is this the core layer? 2014-04-24T10:29:15.850

3 When is a layer 3 switch more appropriate than a router in a branch office? 2014-07-05T08:24:46.307

3 Hub-Spoke topology -- L3 Links use multiple /30s vs single /24 shared? 2014-07-28T16:26:06.227

3 Multiple VLANS or single large subnet for WiFi with potential 1500+ users 2014-08-04T22:41:47.443

3 3-layer clos/fat-tree scaling question 2015-02-18T19:07:49.100

3 Network Layout and Design 2015-03-26T19:24:20.470

3 Network design question 2015-10-09T19:36:32.927

3 L3 Core to Firewall question 2017-11-14T14:43:56.777

3 OSPF Area Design 2018-04-27T14:20:27.967

2 Improving Network Flow Documentation in 3G->4G upgrade project 2013-05-27T00:36:43.177

2 HP Procurve 5406 Traffic Control Via VLANs and STP 2013-07-30T08:11:02.923

2 How can I implement 802.1x when I need to use intermediate switches? 2014-02-04T23:39:49.657

2 Spanning Tree design considerations: MSTP and regions 2014-02-15T21:50:32.223

2 Network distribution/core design advice 2014-06-08T11:37:05.897

2 where to NAT?where to run BGP? 2014-11-26T11:32:07.863

2 MSTP with no single point of failure with 4 switches and 2 regions 2014-12-08T19:38:33.890

2 Routing with a firewall vs L3 switches 2014-12-09T21:27:17.330

2 Layer 2 vs Layer 3 core - with HP IRF 2014-12-29T17:04:52.327

2 Router vs. switch between ISP and firewall 2015-02-24T03:09:02.070

2 Need some help with taking over a network 2015-09-30T22:57:07.993

2 Connecting one public ip address independently to two private ip networks with full port availabilty on both? 2015-11-22T20:35:51.127

2 Fiber Trenching Design (L1) 2015-12-30T00:55:55.267

2 Rate limit based on VLAN 2016-02-02T17:28:38.713

2 Wireless AP placement 2016-02-12T15:58:10.170

2 Network design questions 2017-05-25T21:06:04.013

2 Need some advice with network topology 2017-08-19T22:25:01.163

2 vlans - How to manage vlans in this scenario? 2018-02-04T16:22:10.163

2 Re-tagging identically tagged VLANs 2018-03-25T04:00:51.077

2 Internet structure and ISP networks in detail 2018-11-14T18:06:37.867

1 What would be an optimal design for linking multiple switches? 2014-01-22T05:12:07.220

1 Multi access point setup for connecting ~150 devices(smartphones) to the same wifi local network 2014-04-18T01:09:31.200

1 Are data back up solutions shown on the network diagram? 2014-04-21T10:58:06.837

1 VPN to my small network, correct approach? 2014-05-22T13:24:03.123

1 The Basics of Fiber Optics 2014-07-23T15:04:52.987

1 How can I connect two different locations through our ISP? 2014-07-30T07:27:05.290

1 first LAN integration ( Network design approach ) 2014-08-02T21:58:57.300

1 Network Switch to Create Private Network - Computer Cluster 2014-10-22T03:15:35.763

1 cell phone number and provider, how are they linked? 2014-11-11T21:50:09.520

1 Cisco router + cable modem - How to configure routing? 2015-02-15T00:52:41.513

1 Network load and capacity design - Full Duplex Media? 2015-04-08T15:31:31.240

1 Multiple ip ranges on single subnet 2015-07-03T12:06:34.833

1 what is a Network Architecture 2015-08-02T07:39:13.240

1 Optics for long haul fiber 2015-09-18T20:34:26.413

1 DHCP relay question in small network 2015-09-20T05:03:32.737

1 Fiber vs. Point-to-point radio for campus network 2015-10-21T18:04:51.467

1 Directly Connected Multihomed Hosts 2016-01-26T07:46:54.707

1 What is the advantage in using sub-domains in network naming conventions? 2016-06-07T20:17:50.243

1 Deploying a balanced, redundant network with 2 WAN networks 2016-10-10T17:00:44.810

1 F5 as a backbone router 2017-01-30T16:42:47.217

1 Preventing Load balancing in EIGRP 2017-05-27T10:15:29.927

1 L2 network design questions 2017-05-30T13:56:00.550

1 Hardware implementations of BFD 2017-11-22T16:03:43.820

1 network infrastructure configuration design in a openstack environment to enable instances to have a public IP as floating IP 2018-02-22T10:04:27.600

1 How to design network with high availability in a multilevel small workplace 2018-09-14T20:35:07.860

0 Network architecture for a school 2014-07-01T06:22:12.340

0 General Network Setup for multiple static IP addresses 2015-02-09T16:37:09.317

0 Is it possible to design HD video streaming over wireless? 2015-03-16T13:30:38.253

0 How is the flow/error control using sliding window implemented in data link layer? 2015-03-18T02:26:46.757

0 splitting an already in use subnet 2015-04-02T23:38:59.710

0 Is wireless network sutabile for VoIP services? 2015-04-15T06:37:49.087

0 Best network topology for a large business and a small one 2015-05-15T12:08:59.203

0 Does clos (Leaf-spine) always mean overlay? 2015-09-08T22:49:24.180

0 Not enough ethernet lines; looking for a cheap solution 2015-11-19T13:10:56.027

0 Managment Network: provide wireless access to 3 campus 2015-12-18T16:42:31.497

0 Features of Windows Ad-hoc Network 2016-01-03T00:06:10.133

0 Power Budget Based on Miniums? 2016-02-01T18:18:41.573

0 General best practice for VLANs and domains 2016-03-31T13:34:17.560

0 Guidelines for network design of bladecenter 2016-07-16T16:28:50.097

0 Calculate max transfer speed in LAN network 2017-09-19T10:18:00.900

0 diff btw PTSN and DSL? 2017-12-01T11:14:07.313