10 Detailed dimensions of an aircraft engine compressor blade 2015-01-23T16:25:41.180

8 Is there a mechanical equivalent to a hi/low pass filter (as in electrical engineering)? 2015-09-07T15:45:01.787

7 Are there standard vibration and shock specs for shipment of a product? 2015-03-13T18:26:07.460

7 What type of ultrasonic transducer would be suitable for ultrasonic welding? 2015-04-15T22:35:43.427

6 How can I model or simulate motion caused by an internal vibrating motor? 2015-03-16T16:49:13.207

6 Modelling splashing water in FEA 2015-07-23T14:21:05.247

5 How to prevent vibration loosening whilst maintaining adjustability? 2015-01-20T23:41:13.397

5 Maximum transmissibility of sky hook damper 2016-01-28T07:14:03.310

5 Measuring the road surface quality 2016-12-13T16:45:40.363

4 How do I conduct an experimental modal analysis with a three-axis accelerometer? 2015-09-10T09:37:59.240

4 What level of vibration testing should I perform on my product? 2015-10-26T15:57:06.453

4 Aluminum vs Steel rivets/fasteners in a high vibration environment 2016-05-11T01:27:22.703

4 Undesired vibration of a beam under foot traffic 2016-08-10T21:30:05.160

4 Which mode does get excited under action of dynamic loading? 2016-09-18T11:54:09.447

4 Is a 3 Hz beat frequency from my neighbor's HVAC a sign of a malfunction? 2017-02-27T10:23:38.380

4 How to simulate the Natural Frequencies of a Planetary Gearbox? 2017-03-07T23:57:58.887

3 Dominant parameters in the dynamical response of a linear oscillator 2015-05-12T13:18:28.760

3 How to analyse periodic data obtained from a vibration experiment? 2015-08-07T11:27:40.573

3 Which vibration standard is the most common for transported packages? 2016-05-12T11:13:00.547

3 What does multiplicity of a multiple natural frequency mean? 2017-03-21T00:27:27.837

3 Strategies for cable vibration: eigenvalues are suitable? 2017-07-27T13:50:35.320

2 How to determine the damping coefficient? 2015-11-02T09:45:26.133

2 Sensitivity analysis: How do I perform the adjoint method? 2017-01-20T14:32:22.890

2 What does natural frequencies with multiplicities m=1,2 or n mean? 2017-03-22T02:40:14.760

2 Can a thing resonate whilst exposed to white noise? 2017-07-12T11:52:23.310

2 Combining critical speeds for a shaft of variable cross-section 2017-07-13T19:33:15.827

2 Plot zero-pole from frequency response matrix 2017-11-10T16:15:40.127

2 Mechanical vibration of objects 2018-02-14T10:04:20.820

1 Motorcycle Engine Vibration - Difference between left and right side 2016-08-03T11:55:18.943

1 Mathematical modelling of the crank in a two-stroke (diesel) engine 2016-09-01T09:09:43.833

1 What is the unit of measurement of fatigue damage in a structure? 2016-09-14T13:58:19.493

1 I want a shockproof table for a model train. That is, protection from physical jolts, not electrical volts 2016-11-06T22:39:59.373

1 Selection of an isolation table 2016-12-20T15:49:12.553

1 Measuring motor vibrations 2017-02-07T23:33:33.047

1 How to get mass normalized mode shapes? 2017-02-18T08:19:42.627

1 Why does Experimental Modal Analysis need a reference signal? 2017-03-26T01:40:16.880

1 Reed played by the wind 2017-06-07T17:05:38.747

1 How do I represent equations of motion of a dynamic system in State Space? 2017-06-30T17:17:31.307

1 Why is the spin velocity of a gear irrelevant if perfectly balanced? 2017-07-02T22:15:55.710

1 Determining damping ratio empirically? 2017-07-04T23:53:24.837

1 Modal Testing and Frequency Response Interpretation 2017-09-16T13:44:42.530

1 Units for vibration measurements 2017-10-12T09:24:26.510

1 Simple mass spring damping system sizing K, and C factors 2017-10-26T09:54:18.667

1 Do vibrations affect inductive sensors? 2018-02-06T22:48:52.030

1 Applying modern control systems to real mechanical engineering problems 2018-02-08T12:27:52.737

0 Can vibration break a blade? 2015-08-28T15:12:57.383

0 Vibration absorber design: free body diagram of a mass-spring system 2016-03-07T16:11:40.147

0 Threaded rod length 2017-02-24T20:21:26.267

0 How to get natural frequencies from accelerometer measurements? 2017-03-08T00:41:21.357

0 Vibration of annular sector plate 2017-03-23T07:36:25.183

0 will a force with same frequency as natural frequency make system resonance (in multi-dof)? 2017-04-27T06:54:27.523

0 How do I measure vibration of a moving object? 2017-05-19T12:48:42.123

0 Equivalent stiffness of elastic beam with two springs attached at its two ends 2017-06-11T16:59:23.013

0 Best format to plot vibration data? 2017-06-20T13:35:29.547

0 Detecting potholes through Vibrations 2017-08-03T12:34:03.553

0 Undamped forced vibration for a multi dof system 2017-08-10T19:54:42.457

0 Is it possible to measure x & y displacement components with a single point (out-of-plane) vibrometer? 2017-08-15T14:32:30.230

0 What should be the step type for a non-linear model in abaqus? 2017-12-25T15:12:40.960

0 natural frequency of floating body 2018-02-21T16:08:58.690

0 autocorrelation function of mechanical displacement 2018-03-05T10:21:04.113

0 How to find the maximum misalignment from vibration? 2018-03-06T22:01:05.357