Tag: threads

10 Are threads machined from high tensile steel more susceptible to damage? 2015-03-25T20:45:14.847

9 Why are most standard bolt threads single start? 2015-03-09T02:03:45.357

8 Can nuts safely be removed from bolts where the threads have been intentionally damaged? 2015-03-11T21:51:51.500

6 Why are Whitworth threads angled at 55°? 2017-12-22T18:00:58.843

5 What does "28" and "27" mean on my metric thread pitch gauge? 2015-02-24T21:45:35.510

5 How to let a "screw" leave and reenter a thread 2015-02-25T10:31:13.053

5 Is the tolerance of pitch of a thread standarized? 2015-02-25T15:21:54.267

4 Calculating Load Inertia in a Leadscrew System 2016-11-02T11:31:46.443

4 Cutting flattened out "threads" to prevent small-scale slipping 2017-11-01T11:26:22.120

3 British tapered pipe thread; Wall thickness? & Thread designation tpd? 2015-04-13T13:19:19.540

3 Measuring pipe bolt torque without a torque wrench 2015-07-01T05:09:35.830

3 Hand thread taps for stainless steel 2017-04-05T20:01:00.530

2 Thread-locking on AISC Clevises 2015-05-23T22:20:04.220

2 What is the load response of a threaded fastener? 2015-07-03T13:02:38.310

2 In what context is 50 threads per inch common? 2017-08-01T23:27:11.430

2 Bicycle pump connector thread size 2017-11-23T09:38:19.090

2 Making precise, intricate measurements 2017-11-27T06:06:15.407

2 What thread could this camera motor be? 2018-02-16T21:28:23.427

1 Flat Head Machine Screws with Undersized Threads 2015-06-30T23:46:05.370

1 How to find the minimum shear area of a rectangular thread 2016-01-07T15:28:19.507

1 Compute compressive forces necessary for thread rolling 2016-01-29T19:01:56.810

1 Optimal tightening torque for a SS screw on an aluminium threaded hole 2017-01-09T13:47:48.870

1 Rigid tensioner/turnbuckle: One side tightens, but the other side loosens 2017-08-19T23:59:26.493

0 How to make internal BSPT Rc thread (female) in CAD 2017-07-12T11:21:15.783