Tag: reinforced-concrete

11 Why do we use multiple reinforcing bars instead of one bar with a big diameter in reinforced concrete? 2016-02-24T12:16:37.843

10 Should I reject a concrete mix design for having too high of a compressive strength? 2015-11-17T02:00:46.077

7 Material Properties: Does bending reduce iron rebar's strength? 2015-12-18T15:56:15.717

7 Connections between RC retaining walls and sheet pile retaining walls 2016-03-11T11:22:28.093

7 What is the splice length for two reinforcement bars in tension of different diameter? 2016-06-13T16:26:19.057

6 Telehandler wall collision forces 2015-09-22T12:05:07.420

6 How are loads transferred to bearing piles in a wall pier? 2015-12-14T18:50:25.560

6 Relative strength of wire mesh vs rebar for reinforcing a concrete slab 2016-12-06T16:19:40.757

6 What's the name and purpose of this specific shape of hollows in a reinforced concrete slab? 2017-09-11T11:24:39.927

5 Design behind typical keyed construction joints in concrete walls 2015-03-17T02:19:35.227

5 What are safe locations for openings in reinforced concrete beams? 2016-03-18T12:31:45.943

5 Which one is preferable? Multiple layers of reinforcements or one layer of reinforcement? 2017-05-07T04:19:43.203

4 Reinforced Concrete Columns - Interaction Diagram Question 2015-11-06T17:29:20.527

4 Why design a cable stayed bridge with pylons inclined towards the obstacle being spanned? 2015-11-16T10:58:12.323

4 Multi-stage/multi-section reinforced concrete slab design 2016-01-05T23:09:44.553

4 Basic Hook development length using CSA A23.3 provisions 2016-03-21T17:47:11.380

4 Why would a column expand before accepting load through a narrow thunk? 2016-05-10T10:26:44.763

4 do prestressing tendons located in the compression zone contribute to compression reinforcement? 2016-07-26T12:12:33.937

4 Can steel be replaced with aluminum alloy in reinforced concrete? 2016-11-24T08:37:37.050

4 What do the parameters k1 and k4 adopted in crack control tables in EC2 refer to? 2018-02-23T06:11:07.663

3 How do units of mm^2/mm represent the reinforcing steel area in a slab? 2015-03-06T13:11:42.143

3 How monolitic is concrete when falsework is being crafted for parts of future structure only? 2016-01-18T12:30:17.250

3 How to design a reinforced concrete ship keel? 2016-04-10T19:48:45.907

3 Reasons for bending direction of rebars in beams 2016-10-07T03:58:39.780

3 Design of transverse reinforcement in a wide beam 2017-03-01T03:10:53.553

3 What is the effective depth of a beam with two layers of tension reinforcement? 2018-02-26T08:52:07.330

2 Typical strains in concrete bridges 2015-05-11T22:46:13.303

2 Reinforced concrete design: will there be extra nominal moment on column in a frame structure? 2016-08-18T00:26:27.083

2 Reinforcing beam and slab with correct steel bar structure 2017-07-21T21:01:02.353

2 What is the definition of Ecm in equation 7.10 of EC2? 2018-02-26T10:29:27.093

2 Clarification of cover definition in Eqn 7.11 of EC2 for calculating crack width 2018-02-27T05:50:34.730

1 Sizing plate washers for through-bolting to concrete 2015-03-06T14:41:51.470

1 Shear strength of reinforced concrete filled PVC pipe 2016-09-18T11:39:51.010

1 How would I model a load bearing brick wall supported on a beam in FEM 2016-10-03T06:53:20.687

0 Is continuous beam design deemed "unsafe" by any code of practice/design practice for reinforced concrete building structures? 2016-08-18T00:37:09.913

0 Fiberglass vs Rock wool/Mineral wool reinforced concrete 2018-03-06T14:29:29.293