Tag: plastic

69 Why do glass windows still exist? (Why haven't they been replaced by plastics?) 2016-02-13T06:20:28.890

7 What type of ultrasonic transducer would be suitable for ultrasonic welding? 2015-04-15T22:35:43.427

7 How to determine whether plastic is ABS or Polypropylene? 2015-12-28T18:59:59.827

6 Information regarding plastic hinges that can hold the position 2015-04-13T06:33:37.157

6 What should the size difference be between a lid and a container? 2015-12-02T00:51:38.413

6 Silicon and silicones 2016-05-30T15:20:07.767

5 Finding the pull-through capacity of a nutted bolt and washer in ASA plastic 2015-02-11T23:21:32.310

5 Minimising permeation rate of hydraulic fluid through hydraulic hose 2015-05-15T15:54:24.930

5 Can I seal the inside of a water well to use it as water reservoir when the well is dry? 2015-06-23T22:02:27.137

5 Limits of Injection Molding Regarding Overhung Edges 2015-08-24T18:56:46.540

5 How are protective sheets attached to plastics? 2017-01-29T21:51:30.877

4 Thermoplastics that are permeable to water - high diffusion coefficient 2015-05-08T03:34:03.870

4 Calculating a pull force between two pieces of plastic 2015-05-27T15:56:38.620

4 How do I cut a crack into a polymer/plastic? 2016-04-04T10:24:11.793

4 Difference between 'plastic yielding' , 'plastic yield strength', plastic strength' and 'plastic stress'? 2016-10-18T10:59:22.537

3 Best plastic composite alternative to wood 2015-07-09T19:10:58.677

3 How can I process plastic to give the impression of a leather finish? 2016-01-05T09:11:59.517

3 Finding initial length of a bended plastic sheet (Bend Allowance) 2016-07-20T05:28:43.407

3 Which coating best exploits "darker when wet" phenomena 2017-04-11T07:16:12.460

3 Which plastics dissolve in petroleum? 2017-06-16T13:45:09.393

2 Identifying coefficients to determine cutting speed for PA6 plastic 2015-12-11T14:39:02.890

2 thickness and other specifications PC + ABS for allowing light through? 2016-04-27T16:42:27.613

2 Plastic Injection Moulding a Piece with Undercuts 2016-11-27T09:49:52.277

1 How to rebuild and lubricate worn plastic parts? 2015-08-14T07:53:00.993

1 What screw for 2.0 mm plastic hole in housing 2015-10-08T05:21:18.700

1 How to attach lycra / leather to Polyurethane foam? 2016-06-22T07:39:53.123

1 Plastic tensile bars for Tye testing 2016-12-15T16:42:54.190

1 What sort of plastic is this? What would you call this color scheme? 2017-02-05T19:57:00.957

1 Why not use fire-retardant plastics everywhere? 2017-04-27T18:59:13.117

1 Required clearance for moving part (Push Button) 2017-05-17T20:04:52.720

1 Plastic Vacuum Cleaner Part -- Why did they design it this way? 2017-05-22T01:17:33.503

1 How to build a transparent double hollow helix at home 2017-11-02T02:22:04.797

1 What manufacturing process could be used for this part? 2018-02-27T07:33:31.790

1 How to make machined plastic part slippery for small dry particles 2018-03-05T12:29:47.243

0 What is a transparent material that insulates well? 2016-02-04T12:25:21.217

0 Plastic wrapper stretch 2016-02-05T12:34:16.900

0 Can I inject plastic in a RTV mould? 2016-12-11T18:28:36.543

0 Is parallel layering within a material stronger than perpendicular layering (e.g. as in corrugated plastic)? 2017-01-04T20:02:23.600

0 Releasing extruder air and gas pressurse from screen changer - die lip 2017-07-10T19:29:16.820

0 Designing bulk material handling system for injection molding 2017-07-14T16:49:05.313

0 Replacing LED plastic housing 2018-01-05T23:37:29.140

0 How would I get my hands on something I designed in Solid works? 2018-01-14T07:20:20.940

-1 What material is this? 2018-03-08T07:19:13.087