Tag: mechanical-failure

11 Why do beverage can tabs break when bent? 2015-04-09T17:45:20.373

8 Would engineering bricks explode if used to build an oven? 2015-06-03T19:08:43.163

7 How to calculate the pressure a pipe can withstand? 2015-01-24T19:17:31.397

6 What is the difference between fault tolerance and robustness of a system? 2015-05-13T08:59:46.440

5 Strength of a Vertical Round Aluminum Tube with load cantilevered off it? 2016-03-23T18:48:08.183

5 Is a gear usually held on a shaft friction or an adhesive? 2017-01-04T12:59:27.183

5 Is radians dimensionless quantity? 2017-08-09T06:04:44.057

4 Oblique cutting implemented in Industrial applications 2015-04-21T19:11:45.827

4 How can I apply a fixed and adjustable force to my flexible sample? 2015-07-02T06:01:49.487

4 How does non-electrical ATEX apply to springs? 2015-10-12T01:51:04.827

4 Are Rolling-Element Bearings Practical for Light Loads? 2015-12-11T00:37:31.507

4 What is Saint Venant Principle? 2017-08-08T14:32:12.317

3 Calculating maximum internal pressure from maximum rated external pressure? 2015-07-23T19:02:23.740

3 What is the [PVC] tube or foam in metal springs for? 2015-07-26T15:46:29.557

3 Strength of Welded Joints 2016-04-19T02:43:39.147

3 Difference between Precipitation Hardening and Tempered Martensite 2016-04-26T17:30:24.890

3 How to compare small and large scale model of an IC engine to predict force, torque, rpm etc generated by actual engine? 2016-05-12T15:34:57.603

3 Behavior of materials on application of tension 2017-10-21T22:16:04.900

3 Actual amount of reinforcement gained by adding gusset to welded steel tube construction 2017-12-15T21:49:53.110

3 How to apply static failure criteria for bending stress in an angled cylindrical surface? 2018-01-24T20:45:50.690

2 How to prevent screw from loosening? 2017-12-23T21:44:17.103

2 What is the difference between tau = VQ/It and tau = V/A? 2018-01-25T21:00:19.850

1 Stress intensity factor for mode I 2015-12-28T18:16:27.097

1 mechanical Strength of 3D printed part 2017-02-08T03:41:42.417

1 How thick of an oxide might form on a cast zinc part? 2017-04-03T16:24:36.520

1 Can buckling failure at the first critical load be avoided by "instantaneous" loading? 2017-05-18T17:32:54.833

1 Failure in torsion 2017-08-16T15:18:20.947

1 Historical data for using supervised learning algorithm in the field of Mechanical Engineering 2017-09-04T13:02:46.460

1 Coconut Climbing Machine Ideas 2017-10-08T07:08:55.813

1 Column Buckling: Which is more useful to plot; Buckling Load vs Slender Ratio, or, Stress vs Slender Ratio 2017-11-19T08:52:44.460

1 Switch at the back of a battery eliminator 2018-01-31T00:20:09.197

1 Hardening and Brittleness 2018-02-22T14:36:52.747

0 Can anyone verify this wall thickness of a pressure cooker? 2016-04-20T21:59:58.347

0 bridgman correction factor in compression 2017-05-15T07:00:00.243

0 Temperature vs Material Properties - ABS 2017-11-10T19:07:23.243

0 Plastic failure evaluation of steel using FEM 2018-01-14T09:24:28.837

0 Long term deflection 2018-01-26T20:10:00.330

0 Ductile,Brittle and Malleable 2018-02-19T16:44:18.450

-1 Can a mechanic pull apart a strong bolt by hand power alone with an ordinary wrench? 2016-11-17T04:48:13.260

-1 Moment of force or torque 2017-08-14T16:20:40.097