Tag: 3d-printing

6 How do you make a 3D print with an accurately aligned bore hole? 2015-09-30T02:11:15.903

6 What should the size difference be between a lid and a container? 2015-12-02T00:51:38.413

6 Snap fit on an enclosure 2016-05-20T15:05:17.970

6 Is "pitch diameter" the same as the distance between the centers? 2016-12-08T16:41:08.923

5 How to prevent vibration loosening whilst maintaining adjustability? 2015-01-20T23:41:13.397

5 Evaluating performance of heat sink designs without finite element simulation 2015-02-26T15:33:32.127

5 Can I use AutoCAD to learn mechanical engineering by DOING (like programming)? 2015-07-26T09:06:23.533

5 How do you create a chamfer in 3D CAD that joins the edges of two different shapes? 2016-01-07T16:55:29.697

3 Are ABS/PLA too volatile to be used in cryo vacuum? 2015-12-15T23:31:43.030

3 How to secure a rotating disc so that it has no wobble 2016-01-13T01:35:41.500

3 How to hold electrical wires on a part? 2016-05-04T07:18:48.193

3 Implementing PID feedback control 2016-10-10T03:25:58.230

3 Sealing a rotating shaft in a 3D-printed part 2018-03-07T01:42:07.540

2 What material for DLP/SLA 3D printer bottom window? 2015-03-24T08:01:43.147

2 Why is 3D printing with metals so uncommon? 2016-05-07T12:35:26.483

2 Stretch part of object in Autocad or 123D Design 2016-06-28T06:28:48.560

2 Can photopolymers from 3D printer be fused together like for thermo plastics? 2016-12-05T21:14:57.023

2 Simple and easy Open Source CAD tools for basic 2D and 3D designs 2017-11-03T18:51:44.353

1 What is the maximum degrees per step of a stepper motor for a 3D printer? 2015-11-16T01:14:42.690

1 Easily accessible material for maximum grip on a prosthetic hand? 2016-04-28T18:44:02.633

1 How to build a pivot linkage for a robot. 2017-02-20T11:18:24.717

1 How to design CAD bevel gears from known outside diameter? 2017-02-28T22:03:14.323

1 Are 3d printed gears (ABS) suitable for long term use? 2017-12-16T20:29:01.740

0 How do I "subtract" sketches in CAD? 2016-06-12T22:47:45.177

0 Thickness of a 3d print general purpose plastic/PLA 230 V ~ isolator? 2017-02-17T20:39:52.517

0 Why does the Ultimaker 3D Printer has a Heater + Heater transfer plate (aluminium) + Glass? 2017-04-10T18:10:11.917

0 How to water seal a metal plate into the wall of a plastic water tank? 2017-04-26T14:49:38.753

0 General purpose automated assembly? 2017-06-05T04:34:01.547

0 Is it likely that a 3d printer will ever be able to print a copy of itself? 2017-07-22T11:59:30.540

0 How much weight can DVD drive stepper motors carry? 2017-10-26T08:02:34.093

0 Fly Reel Spool Solidworks 2017-11-23T14:28:56.457

-2 Is the construction of a high-speed 3D printer (replicator from Star Trek) possible? 2016-09-28T18:42:01.667