Tag: fitting

13 When is pipe dope/tape needed? 2013-12-10T15:32:12.893

11 How can I fix a door that doesn't close because it doesn't fit the frame? 2010-07-31T17:29:37.503

9 How to create a hidden plug for PVC pipe 2015-11-12T17:17:55.420

7 Broken step on staircase 2011-02-01T20:31:43.473

6 Is it possible to reuse a copper pipe's compression fitting? 2013-12-10T03:21:57.453

4 What are some tips for soldering brass fittings to a copper pipe? 2011-02-05T05:38:01.083

4 How can I attach a pipe to a flat surface? 2012-08-14T12:14:49.197

3 best way to install a flat wall fixture on a sightly curved wall 2011-02-07T10:57:41.740

3 What is the difference between swage fittings and compression fittings? 2013-07-18T05:33:46.767

3 How can I replace a ceiling light and repair the surrounding plaster? 2013-08-27T20:12:40.943

3 How do I disconnect (and reconnect) the tubing from this fitting? 2015-08-16T19:13:57.160

3 Do I need to separately bond sections of copper pipe connected by push-to-connect fittings? 2017-06-01T13:08:36.920

2 Attaching a drain cock for my air compressor to a workbench? 2012-08-28T03:57:30.107

2 Change circuit breaker for dual purpose fitting 2012-09-21T14:43:59.183

2 Do 22.5 degree pipe fittings exist? 2013-01-23T19:16:17.283

2 What is this called (adjustable angle pipe footplate)? 2014-11-04T08:49:44.313

2 Should I trim or bend the lip to a strike plate? 2014-11-16T23:07:44.510

2 Tube Fitting vs. Flare Fitting vs. Compression Fitting 2015-12-20T18:18:09.953

2 What is the name of this fitting? 2017-07-26T21:03:15.253

1 How can I hide the gap at the base of the stairs and the door, when installing laminate flooring? 2013-03-24T11:07:43.737

1 Proper way to join PVC pipes to brass ball valve 2014-08-02T13:47:10.617

1 Where can I find a 5/16" end cap for a faucet diverter? 2014-08-13T15:21:32.067

1 How to remove stuck Rawl bolts 2014-09-25T17:45:09.763

1 Fit an existing frame into a bigger opening 2014-10-04T22:44:32.723

1 What types of tubing can I use with Push-to-Connect fittings? 2015-04-15T00:44:54.063

1 Which plumbing adapter to join 3/4" FIP line to 3/4" Female NPT inlet port? 2015-08-28T04:26:40.113

1 Remove over tighten copper pipe fitting 2015-11-14T21:28:19.483

1 Is it ok to use a brass compression sleeve on vinyl tubing? 2016-05-01T13:09:54.803

1 What size and type of fitting is this? 2016-10-31T01:08:44.970

1 How is a "ground joint union" different from any other union out there, and why are they specified for gas service? 2016-10-31T01:22:24.917

1 Going from a PVC Sched 40 1-1/2" PIPE to a 1/2" Poly Combination Elbow 2016-12-09T03:05:10.780

1 Are compression fitting threads all the same? 2017-01-25T23:20:56.443

1 Thread fittings with O-Rings 2017-04-02T19:18:02.577

1 Help identify a mystery brass part along the water line 2017-12-23T00:33:51.240

0 How to smooth the separation between 2 hardboards on the floor? 2013-09-28T17:13:18.920

0 What fittings to use for floating box shelves 2015-01-17T15:40:06.200

0 Fitting recessed lighting without damaging ceiling 2015-09-27T23:11:28.727

0 What size are the pipe fittings on the feed line side of a sink feed? 2016-07-02T18:38:13.267

0 Fitting a dishwasher into integrated cabinets 2016-09-23T13:25:26.220

0 Improve loose thread fitting 2016-10-25T18:48:09.973

0 What are these wire connectors called? 2017-02-23T01:37:06.047

0 Samsung Front Load Gas Dryer, plastic connection problem 2017-03-23T20:44:57.547

0 Repairing a break in threaded water pipe joint 2017-03-28T10:31:39.353

0 Brass Barb Fitting Threaded Fitting To PVC End Cap 2017-05-11T18:44:22.060

0 Nickel plated vs brass vs other types of fittings and valves? 2017-12-03T06:18:22.573

0 How to install a light fitting 2018-01-13T10:46:05.933

0 How to join two fixed male pipes 2018-01-19T07:29:15.713

0 Can I use compression connections on rigid "L" copper? 2018-01-28T19:54:31.667

0 Teflon Tape or Sealant on Any Flare Fittings for Gas Connections? 2018-03-04T06:34:07.043

-1 Is it normal for uPVC window shutters to be pre-fitted to the frame at the factory or not? 2014-11-23T16:41:56.957