Tag: support-structures

17 What can I use to "sand" my ABS prints? 2016-01-13T00:41:32.907

14 How to improve face that are printed on support? 2016-02-07T15:03:18.640

12 How to easily get rid of rafts and support structures? 2016-01-12T19:28:09.363

9 Platform support up to a certain Z height in Ultimaker Cura/G-code 2018-04-02T21:02:54.000

9 Software for adding supports to 3D printed miniatures in STL file 2018-05-10T08:08:03.047

8 How does Carbon3D's CLIP technology handle bridges and support material? 2016-04-11T03:30:22.983

7 Getting better support than Slic3r generates 2016-05-04T02:47:04.393

6 How to add internal supports/localized infill, preferably in Cura? 2016-07-11T08:29:43.950

5 Is 3D printing feasible for this design? 2016-03-07T18:42:44.330

5 Printing coarse threads 2017-03-26T16:44:21.083

5 Support material first layer adhesion issues 2018-03-28T12:13:05.263

5 How can I generate and export the support structure for an object as a mesh? 2018-05-25T01:19:10.300

5 3D Printing of a Swellable Material 2018-05-26T12:40:06.847

5 Print "hairs" without support in GrabCAD Print 2018-10-24T17:03:39.637

4 Structural Analysis 2017-03-17T01:43:29.620

4 How to correctly print an object with supports 2018-10-22T00:34:40.537

4 Horizontal line z-axis not printing correctly 2019-10-05T23:16:59.607

3 How to enlarge a Sketchup Model 2016-05-11T06:45:35.900

3 Print circle arcs without supports 2017-02-07T14:13:32.897

3 Easy way to create honey comb filling for a generic printer/onshape 2017-02-12T10:22:17.747

3 Best method to make dissolvable supports? 2017-05-21T05:21:40.173

3 Only generate supports between object and bed (for a brain model) 2018-05-11T17:53:10.460

3 How can I tell if an STL model will need supports? 2018-07-01T02:09:53.910

3 PVA support with small tolerances 2018-12-17T13:09:31.213

3 Difficult to remove support material 2019-01-16T12:04:55.947

3 Slicer settings for easy support material removal 2019-02-15T11:44:08.840

3 How can I print a 1 cm overhang with minimal supports? 2019-07-23T16:41:14.297

3 My first 3D printing - I need some advice or tips 2019-09-13T15:34:26.373

3 Technique for removing support from Ultimaker 2+? 2019-10-19T10:21:52.463

2 Is it possible to print an object that has a "roof" without anything under it? 2017-03-11T15:45:09.743

2 Supports for dense Voronoi pieces 2018-01-21T03:42:15.537

2 What are various types of supports required in slicing the CAD model? 2018-05-06T07:17:43.817

2 How could I print a large sphere-like object? 2018-12-21T18:39:06.110

2 Flexible filament how to print a hollow "sleeve" 2019-01-24T00:42:51.380

1 How to avoid warping when using supports 2018-02-11T16:00:58.407

1 Ultimaker Cura problems with build platform size and overhang support 2018-11-12T20:50:43.540

1 Support not where needed 2018-12-15T17:32:27.617

1 Slic3r - how to combine specific perl code with Slic3r SupportMaterial.pm? 2019-03-10T12:23:31.877

1 How to create supports for the parts hanging above 45 degrees? 2019-06-03T05:58:00.617

1 3D printing overhangs that are over .200 in 2019-10-11T05:23:08.063