Tag: nozzle

18 How to identify nozzle wear 2016-01-22T03:53:15.250

13 Will I see a noticeable difference switching from a .4mm to a .3mm nozzle? 2016-02-05T22:18:16.727

10 Ultimaker Layer Resolution vs Nozzle Size 2016-09-24T04:57:54.660

10 How close should the nozzle be to the substrate? 2016-10-18T11:21:17.437

10 Which is the difference between MK6 and MK8 and even MK10? 2018-02-08T06:55:21.307

10 Why is it conventional to set line width > nozzle diameter? 2018-09-21T06:13:23.900

9 How thin can my extrusion be from a 1.2mm extruder? 2016-02-05T23:53:48.623

9 Ender 3 nozzle homes off the bed in the Y axis 2018-08-10T19:31:29.763

9 Wear resistant nozzles 2018-08-14T12:21:52.117

9 What is the purpose behind a glass nozzle? 2019-11-04T14:46:33.100

7 Teflon tubing in nozzle throat coming out? 2016-03-31T07:14:05.890

7 Are Makerbot Smart Extruder nozzles swappable? 2016-03-31T15:23:27.067

7 Is there any reason *not* to use a steel nozzle for printing all materials? 2017-04-13T14:41:27.853

7 Nozzle heats up past the setpoint and increases 2018-07-19T06:02:46.303

7 Geeetech Prusa i3 Extruder seems to push more filament, gear slips/skips? 2018-10-10T23:03:56.923

7 Tevo Michelangelo nozzle below build plate? 2018-10-30T17:22:34.917

6 da Vinci Jr. nozzle diagram 2016-06-30T22:07:25.963

6 Access Temperature sensor data of 3D printer via Serial connection 2016-07-24T21:40:34.267

6 Should I use different nozzles for different materials? 2016-09-29T20:54:17.693

6 What are the downsides and aftereffects of using a smaller nozzle? 2016-10-24T19:55:19.650

6 What happens when I print a 0,6mm thick wall with a 0,4mm diameter nozzle? 2017-11-05T21:51:25.553

6 Hot end jamming very quickly 2017-11-09T17:33:13.327

6 Anet A8 bad/inconsistent extrusion after changing nozzle 2018-05-02T19:06:06.223

6 Nozzle heats while autoleveling (or before) 2018-05-13T15:20:46.027

6 Slicer line width vs. extrusion multiplier for layer adhesion? 2018-09-21T11:28:37.490

6 When should I replace the nozzle on my printer? 2019-09-04T03:31:14.850

5 Bronze Filament Problem 2016-04-13T19:30:52.690

5 How do I get a replacement PTFE tube to fit inside my nozzle? 2017-06-25T02:40:20.267

5 If I have a nozzle clog, can I easily get rid of it by simply replacing the nozzle? 2017-12-30T22:28:28.170

5 Why is my filament pressed together at the nozzle 2018-04-18T13:34:18.830

5 Extruder clogs with HIPS 2018-05-30T20:44:25.467

5 Do all 3D printers allow the printing of flexible material? 2018-08-27T21:02:10.920

5 Extruder/nozzle keeps clogging up 2018-09-01T10:49:52.933

4 true color printing with CMYK+White (not 3-in-1 diamond head RGB) 2016-10-17T06:18:24.220

4 Why some corners aren't sticked well? 2017-11-14T18:49:29.200

4 The bottom of the printed objects has waves after replacing the nozzle 2018-02-12T09:25:07.363

4 What will be the best way to remove pla from a volcano nozzle? 2018-05-10T14:06:30.123

4 Makerbot Smart extruder+ heat block and nozzle question 2018-10-22T08:25:03.953

4 Can the filament tube be outside of the nozzle? 2018-11-26T19:29:51.323

4 Does color changing PLA require a hardened nozzle? 2018-11-27T19:34:27.540

4 Can leaving the nozzle at 160 °C continuously on in between prints affect the viscosity of the prints? 2018-12-12T13:07:12.257

4 What is the functional difference between an e3D-Style nozzle and M6 Chinesium Nozzles? 2019-05-13T13:57:16.847

3 Change 1.75 mm 3D printer to 3.0 mm printer 2016-12-20T21:34:28.330

3 Prusa I3 - Burn marks on print 2018-03-04T19:36:09.447

3 Threads for nozzle (Anet A6 extruder) 2018-04-05T17:17:46.723

3 Scratches in the build plate - How did this happen, and may it cause problems? 2018-12-14T14:52:34.647

3 Correct nozzle replacement 2019-01-26T11:32:04.963

3 What does nozzle size affect besides line width in, e.g., Ultimaker Cura? 2019-06-12T14:38:44.383

3 How to solve spillage problem? 2019-06-26T11:47:10.083

3 Nozzle cleaning 2019-08-28T08:40:00.717

3 Academic research behind hot end design? 2019-11-08T13:08:06.350

2 How to tell if A 3d printing kit has a replaceable nozzle 2017-11-07T20:11:57.840

2 How easily can I remove/replace the nozzle of the prusa i3? 2017-12-13T22:10:49.067

2 3D850 stuck in the nozzle 2018-02-21T12:15:51.290

2 PETG Sticking to Nozzle 2019-02-19T02:47:51.657

2 Replacement Nozzle options 2019-03-29T20:39:57.667

2 Can't seem to fix over extrusion 2019-05-27T17:37:59.347

2 What clearance should I leave between parts that are supposed to fit together perfectly when using a .6mm diameter nozzle? 2019-08-04T03:33:42.833

2 Prusa i3 MK3S keeps clogging during print. Ugly streaks sometimes, and complete clog when printing with lower layer lines 2019-11-13T19:43:55.203

1 Filament is stuck in nozzle 2016-08-27T13:46:01.610

1 Can the da Vinci Jr 1.0 print in 100 microns, if so how? 2016-12-20T01:59:00.677

1 How to improve resolution using 0.3mm nozzle? 2018-01-23T06:00:57.730

1 Filament Leaking During Automatic Bed Leveling 2018-12-21T14:43:50.243

1 Material extruded to prime the nozzle doesn't stick to bed at first 2018-12-21T16:06:18.033

1 Path of a nozzle crosses over itself 2019-02-17T19:00:18.093

1 Which nozzle should I buy for Anycubic i3 Mega? 2019-04-12T06:52:05.117

1 Creality CR10 S5; the Z dimension is wrong after switch from 0.4 to 0.2 mm nozzle 2019-06-07T11:51:05.407

1 How to avoid nozzle from hitting the model? 2019-06-17T21:50:17.157

1 Problems with under extrusion and clogs on CR-10 2019-08-31T18:16:16.677

1 Anycubic Kossel Plus raises the Printhead around the corners of the bed too High if the print is too close to the corners 2019-10-11T09:19:07.563

0 E3D V6 nozzle vs MK8 nozzle, first layer adhesion 2019-01-01T19:49:47.637

0 Too long time to wait for M109 to stabilize when changing extruders 2019-08-22T10:43:21.737

-1 I found a filament that can be used for really precise FDM printing, Who could I hire to create a custom nozzle for it 2017-12-13T18:32:53.267