Tag: layer-height

14 How does the sizes of nozzle diameter and the Z-axis layer resolution work? 2016-06-23T04:24:21.237

10 Is it necessary to have both hot ends on a dual extruder printer at the same height? 2016-02-03T09:30:32.887

9 First layer overlap on one side 2016-12-16T18:28:38.123

8 Do I need to recalibrate z-probe offset every time I switch to a different layer height? 2016-06-07T20:00:05.497

8 Nozzle rubs on previous layers 2017-10-03T04:11:02.003

5 First layer height problem after changing nozzle 2018-05-20T23:14:38.813

5 Prusa i3 pro b second layer failure 2018-10-29T09:56:29.457

4 Can you print at 0.3 mm with a 0.2 mm nozzle? 2017-05-04T07:17:47.683

4 Adhesion problem (heat bed or extruder issue) 2018-06-14T22:04:54.027

4 Print speed and settings for printing below 0.1mm resolution on PLA 2018-09-11T18:40:57.507

4 Under-extrusion after a certain amount of successful layers? 2019-01-21T05:58:41.080

3 1st layer problems with .1 layer height 2018-03-21T13:07:52.767

3 Prusa i3 MK3 latest release first layer calibration issues 2018-12-15T11:41:11.013

3 How specific can I get setting layer heights? 2019-01-06T01:48:16.233

3 ABS prints consistently splitting in the same place 2019-10-31T08:38:27.627

2 Anet A8 - first couple of layer are trash 2017-11-07T21:18:06.827

2 How thick is 0.1 mm? 2018-08-08T16:36:46.010

2 Does matching whole Z-motor steps for layer height actually matter on Ender 3? 2019-09-09T18:18:48.333

1 Path of a nozzle crosses over itself 2019-02-17T19:00:18.093

0 Layer 1 won't adhere anymore 2018-07-24T18:19:00.927