Tag: infill

20 What are the advantages of gyroid infill? 2018-10-01T12:21:30.383

13 Choose infill percentage 2016-04-24T14:33:10.113

13 Different infill in the same part 2018-08-01T05:50:15.653

11 Slic3r - Can I add new infill patterns? 2016-03-14T22:55:19.037

8 slic3r: Can I vary the infill percentage for different heights of my model? 2018-09-29T23:42:49.567

7 Unidentified problem in printing 2016-12-12T20:57:16.917

7 Does Cura have an algorithm for any infill percentage or does it just have specific patterns? 2018-08-08T18:04:20.210

6 How to add internal supports/localized infill, preferably in Cura? 2016-07-11T08:29:43.950

6 Infill pattern comparison 2017-02-21T08:21:29.327

6 Infill is rough - how to enhance? 2019-02-11T21:34:42.023

6 Do Cura's self-crossing infill patterns account for excess material from self-crossing? 2019-07-03T18:51:38.350

5 Thick wall or solid part of an otherwise medium-fill part 2016-12-24T03:13:41.090

5 FEA in 3d printed solids 2017-11-14T16:16:49.117

5 Square and parallel infill patterns 2018-02-25T03:00:46.800

5 Infill failure when printing larger prints 2019-02-21T20:14:21.833

5 Uniform squishy infill 2019-05-06T11:11:55.830

4 First layer - not even infill 2016-08-14T14:14:45.807

4 How do I repeat the layers of Slic3r for every 3 infill layers with different angles? (Might need some programming knowledge) 2017-03-16T03:06:33.303

4 How to slice this wing so it has a smooth infill like perimeters 2017-06-03T22:13:06.413

4 Ultimaker Cura infill issues (weird vertical pillars due to underextrusion) 2017-06-28T22:04:49.930

4 How are infill paths connect to form an efficient path that respect the object's geometry? 2018-09-05T03:25:42.310

3 Prusa i3 MK2 doesn't accept the printing material 2018-03-15T21:47:08.043

3 What is this weird support line doing in this print? 2018-09-18T02:07:43.240

3 Infill failure at the far corner of two different prints 2018-09-18T19:44:50.687

3 Internal wall does not print in horizontal print orientation 2018-12-24T20:26:50.463

3 underextrusion of infill? 2019-05-08T17:36:12.617

3 Slow down first layer above infill in Ultimaker Cura 2019-06-14T15:04:46.830

3 Infill keeps "shoveling", but perimeters are fine 2019-07-15T03:56:21.063

2 Will my Duplicator i3 be able to print this hole in the vertical wall without infill? 2017-02-02T20:05:22.480

2 Does anyone know how Slic3r determines its infill adjacent strand spacing, instead of using fill density? 2017-05-20T11:55:22.813

2 Using multiple infill types within one model 2018-09-29T12:04:41.693

2 Gap between infill and walls for one filament only 2019-01-12T12:51:04.407

2 Best infill for inter-layer adhesion 2019-05-26T15:53:27.013

1 Why does Infill % stop print from sticking to the bed? 2018-11-29T16:08:20.250