Tag: adhesion

13 Why does hairspray work as an adhesive for ABS? 2019-10-16T05:39:49.663

11 Troubleshooting poor adhesion at the edge of the bed 2016-01-15T16:33:07.330

11 Can't get print to stick, no matter what I try 2017-01-05T02:22:18.017

10 Second layer: gaps, poor adhesion - why? 2016-11-24T17:07:25.063

9 The work is now sticking too well to the bed - what to do? 2016-08-30T18:51:04.977

9 One corner never sticks 2016-11-30T17:51:16.927

9 Turning off heatbed for the last few layers. Good idea or not? 2017-02-11T04:25:59.960

9 Lines of PLA not sticking to the bed 2017-03-05T20:45:52.083

8 Why does the painters tape have to be blue? 2019-05-20T00:35:25.887

7 My print is warping: how can I ensure that it cools evenly? 2016-01-12T21:00:36.337

7 Poor adhesion only for first couple of inches 2016-10-14T00:54:25.423

7 What is the MakerBot Grip Surface lifespan? 2016-12-11T04:46:59.613

7 How do skirts aid print bed adhesion? 2018-05-29T01:40:38.827

6 POM filament not sticking to the build plate? 2018-07-06T11:30:53.763

6 PETG layer adhesion 2019-05-26T20:16:06.960

6 Why doesn't PLA stick to heated bed? 2019-11-03T15:41:37.627

5 Glue sticks for print bed 2016-05-06T15:34:40.387

5 Bed Adhesion materials 2017-05-11T20:12:39.170

5 Adhesion problems with masking tape 2018-01-24T16:43:57.137

5 Getting PLA to stick to a cold bed 2018-02-14T06:52:42.273

5 Support material first layer adhesion issues 2018-03-28T12:13:05.263

5 Bed too close to nozzle? 2019-01-08T14:45:17.120

5 Infill not reaching perimeter 2019-04-12T18:31:27.767

4 Lower BuildTak adhesion 2017-03-24T06:27:41.337

4 What tweaks do slicers use to get rafts to stick? 2017-06-03T00:19:41.740

4 Correct amount of force on piece of paper when leveling bed 2017-09-06T08:25:23.983

4 Print slipped away 2018-04-12T21:40:23.060

4 Getting a Cura Raft to stick to the object more firmly (for ABS) 2018-11-10T21:29:03.850

4 Under-extrusion after a certain amount of successful layers? 2019-01-21T05:58:41.080

3 3d Print pops off before complete 2018-01-15T00:25:03.230

3 What is the best way to print a model with support material in first layer? 2018-01-21T06:25:47.097

3 Removing protopasta conductive PLA skirt from a bed 2018-03-31T22:48:49.780

3 When is kapton tape useful as a bed adhesive? 2018-09-25T19:54:31.450

3 Why is Print Adhesion almost good, but still not right? 2019-01-01T04:15:05.980

3 Filament moving around and not sticking to bed 2019-02-25T22:08:24.473

3 Printer fails to print a cube 2019-03-19T11:43:28.750

3 Adhesion issues using AmazonBasics PLA 2019-03-27T01:17:56.050

3 Removing glue residue on part after printing 2019-04-25T16:38:27.463

3 ASA and BVOH adhesion 2019-05-07T19:44:06.350

3 DLP build plate adhesion 2019-06-21T19:42:48.493

2 Filament lifts from the hot bed while printing 2017-05-09T08:58:14.313

2 What do you use to keep your blue tape from lifting? 2018-12-31T20:52:16.257

2 Setting up a brim/raft for only a portion of the overall print 2019-01-07T17:21:15.440

2 Adhesion problem when printing calibration test 2019-01-22T05:25:24.870

2 Long prints shifting with Ultimaker 2 2019-04-10T08:14:57.157

2 Polypropylene Bed Adhesion 2019-04-18T01:51:39.197

2 Build plate adhesion, PLA 2019-07-11T08:44:58.130

2 Alternative raft generation 2019-10-01T19:21:41.183

2 What hairspray brands are known to contain PVA / PolyVinylpyrrolidone 2019-11-08T18:07:52.600

2 First layer looks weird and print fails. Prusa i3 MK3 2019-11-30T16:54:34.203

1 Tell tale signs bed tape has given up the ghost 2018-09-29T16:11:30.780

1 Not starting printing on bed 2018-12-01T11:46:53.337

1 How to level bed after applying glue stick for bed adhesion 2019-02-01T07:03:26.667

1 How do I get circles on small interior holes to adhere to the bed? 2019-04-16T21:12:54.427

1 How would you clean/prepare a flexible/magnetic mat (e.g. Ender 5) as compared to a glass bed? 2019-07-07T02:34:02.327

1 Does anyone know what would cause this? 2019-10-28T05:07:22.337