Tag: 3d-design

30 Will 3D Printed Dice Be Fair? 2017-02-15T16:44:09.693

27 Designing clips that won't break 2016-03-16T10:04:42.047

16 What is the best 3D modeling software for a beginner on a 3D printed mini barrel project? 2016-08-21T14:31:02.263

15 Open Source 3D scanning 2016-05-11T20:46:53.420

15 How do I 3D-print fair dice? 2017-10-30T16:47:28.023

14 Tips for making parts that push/snap together 2016-03-12T06:50:45.473

14 Do 3D printers really reach 50 micron (0.05 mm) accuracy? 2019-06-22T22:06:22.017

12 Comparative design methods for joints that will be joined together 2016-01-19T04:55:24.273

11 3D printing with blender 2016-06-06T13:33:48.803

10 How to 3D Print 5-pointed star object that doesn't have flat bottom and hole in the middle? 2016-06-12T21:13:39.727

10 What's a good way to secure bushings in a 3D printed part? 2018-02-27T18:25:22.440

9 What is the best length of the melting zone in the hotend? 2016-02-13T20:50:47.553

9 How to create tappered thread in OpenSCAD? 2016-06-18T09:54:45.630

9 Feasible 3D Printed Snap Connectors 2017-02-16T13:15:45.913

8 Printing a CV joint 2016-02-10T14:52:38.880

8 How to carve a hollow cylinder along the curved surface in Fusion 360 2017-06-04T01:46:48.983

8 Are there any "best" or at least "common" practices to handle allowances in OpenSCAD code? 2017-12-20T02:26:21.183

7 Are there any services that offer 3D scanning? 2016-05-09T17:46:43.240

7 What is the easiest way to modify/resize an object inside a STL file? 2016-06-13T18:08:39.310

7 Are self intersecting meshes dirty from a 3D printing perspective? 2016-12-27T17:56:50.160

7 SVG to STL conversion to make symbols recognisable for visually impaired users 2017-12-05T09:46:31.103

7 Generating mold from stl file of the 3D drawing of the object 2018-05-07T18:57:16.750

6 Triangulation adapted to curvature 2016-03-14T00:06:06.590

6 Printing multiple prints stacked on top of each other 2016-03-25T02:37:01.793

6 Is this model feasible to print? 2016-05-14T02:39:17.017

6 How to add internal supports/localized infill, preferably in Cura? 2016-07-11T08:29:43.950

6 Slicing software and Sidewall 2016-10-22T04:58:26.293

6 Building a pivot linkage for servo steering with 3d printed parts. 2017-02-20T07:21:00.953

6 FDM layer bonding strength 2017-04-15T19:48:06.630

6 Printing Object in multiple parts 2017-10-26T06:14:27.227

6 Are 3D printed gears applicable for industrial use? 2017-12-16T15:41:51.290

5 Is 3D printing feasible for this design? 2016-03-07T18:42:44.330

5 Seamless prints? 2016-04-09T10:15:56.380

5 Preview 3d printing process 2016-05-01T09:34:01.923

5 Simulation tool software for 4D Printing 2016-10-17T15:51:21.283

5 Opening .STL to scale in Print Studio (Dremel) 2016-12-18T15:40:13.923

5 Mesh/Geometry quality 2016-12-23T17:07:50.837

5 Which 3D design softwares make multi-material amf or other design files that slic3r will slice? 2018-03-26T17:30:32.503

5 Getting precise measurement of a complex rod 2018-05-20T15:36:15.710

5 OpenSCAD library for empty space/holes 2018-05-23T22:28:22.280

5 Should black high temperature ABS flow in direct sunlight? 2018-06-30T14:14:13.950

5 What is the best method of printing joints for action figures? 2018-09-29T20:44:29.700

4 Why are the STL files for the Ultrascope telescope at 45 degree angle? 2016-04-05T16:25:04.363

4 Functional object in low poly - program and tutorial 2016-04-13T18:59:16.827

4 Is inconsistent vertex density a bad thing? 2016-05-16T12:11:49.243

4 Car Body shop Printers 2016-06-05T20:46:02.477

4 How to add tolerances/gaps in 123d Design? 2016-10-24T13:59:18.637

4 How do you 3d print from an existing part when you have no CAD drawings? 2017-02-10T04:02:14.437

4 Slic3r not interpreting STL correctly 2017-06-03T04:59:14.227

4 Is it possible in any 3D printing software to create a coiled tube? 2017-07-03T15:49:00.163

4 Mechanics for modelling a push button latch spring 2017-07-18T13:27:42.120

4 How to "paint" a mesh on a stl/obj 2017-08-02T00:26:23.020

4 Looking to use 3D printing to make a master plate for rubber stamp vulcanizing 2017-08-25T06:31:02.997

4 How to make an object hold water 2017-08-27T07:38:36.850

4 3D Builder is Saying "One or more objects is invalidly defined" 2017-10-18T22:13:55.230

4 Slicing adds holes/cracks to my object 2017-10-29T20:01:20.977

4 My print did not turn out as I expected. Where can I start troubleshooting? 2017-10-31T00:55:27.567

4 How to remove internal part of a hex grid 2017-11-27T13:36:44.387

4 Can the `render` function be used to speed up rendering? 2018-02-05T04:09:08.453

4 STL to STP CAD Conversion 2018-02-23T22:01:25.383

4 How do I compute the surface & volume of a large amount of STL files? 2018-04-23T13:09:52.727

4 Efficient packing of models with chains 2018-05-23T18:40:36.633

4 What printer should I consider for printing microfluidic channels? 2018-07-16T00:29:13.920

4 FreeCAD to design moving parts 2018-10-08T19:40:38.577

4 Hemispherical Bowl : how is it possible? 2018-10-16T05:24:58.090

4 How to print a voxel object? 2018-12-27T17:16:34.997

4 Advice for 3D modeling peg for sprinkler dripper 2019-05-28T04:01:33.180

4 Set the overhang parameter in Blender 3D printing tool box 2019-05-31T14:40:27.307

4 How to fix wall separation in 3D prints (gaps in between wall perimeters)? 2019-06-16T09:50:38.257

4 Rule of thumb for small type 2019-06-20T19:33:42.107

4 Problem in 3D printing of an empty model 2019-06-30T18:33:02.347

3 Printing a non-self-aligning caged deep-groove ball bearing 2016-11-15T12:51:23.607

3 Converting Injection Molded STLs to printable STLs 2016-11-15T19:18:04.467

3 How are things designed like a USB casing designed 2017-01-12T23:24:57.273

3 Print circle arcs without supports 2017-02-07T14:13:32.897

3 Snapping to Ground - 123D Design 2017-02-10T21:50:45.500

3 How to join pieces automatically using interlocking or similar? 2017-04-15T01:58:53.287

3 Snap-in clamp geometry 2017-04-18T23:28:24.900

3 Make a nose cone in Fusion 360 2017-10-01T01:36:14.353

3 How to concave a cylinder with Onshape? 2017-11-09T12:59:46.333

3 How to draw cube with cone (Dreidel like), using Onshape? 2017-12-20T18:55:06.917

3 How to modify 3D model of body? 2018-01-11T05:47:28.070

3 Dual PSU with one switch fuse 2018-05-07T05:42:15.197

3 Linking the 3D printing path coordinates to CAD for modelling 2018-06-24T11:40:27.047

3 Where is the line between "inspiration" and copy and derivative? 2018-07-16T22:56:30.507

3 What special considerations must be taken when designing parts for 3D printing? 2018-08-23T21:30:56.073

3 Can the glTF format be used for 3D printing? 2018-09-12T00:02:34.023

3 How can I have a large 3D printed object? 2018-10-01T22:36:29.540

3 3d print aluminum valve cover for car 2018-10-16T14:07:10.670

3 Bicycle air pump project 2018-12-13T00:12:00.250

3 PVA support with small tolerances 2018-12-17T13:09:31.213

3 How do I decide what size my push-fit feature should be? 2019-02-05T18:18:00.183

3 Material for printing orthotics 2019-06-09T00:20:51.997

3 3D Print Enclosure 2019-07-03T21:12:15.560

3 Creating "pie slice" in OpenSCAD? 2019-07-20T22:11:16.773

2 Which properties of real organs do 3D printed organs have? 2016-04-12T11:44:22.927

2 Ball valve to be prototyped 2016-05-01T06:42:46.247

2 File Input data types 2016-07-01T19:18:06.453

2 What is needed to create dwg from drawing? 2016-08-30T05:16:26.640